HYDROCARBON DYNAMICS LIMITED — Capital/Financing Update 2013

Feb 21, 2013

ASX / Media Release

22 February 2013

==> picture [596 x 114] intentionally omitted <==

Pryme Successfully Completes Balance of Placement

HIGHLIGHTS

==> picture [18 x 10] intentionally omitted <==

$1.0 million raised through private placement

==> picture [18 x 10] intentionally omitted <==

Strongly supported by major shareholders and new strategic investors

Pryme Energy Limited (Pryme) is pleased to announce that it has raised $987,000 through a private placement of 12.34 million new ordinary shares, at a price of $0.08 per share (the Placement). The Placement represents the balance of the securities available and that can be issued under the Company’s 15% issue capacity in accordance with ASX Listing Rule 7.1.

“The placement is the second and final part of an issue of shares we made in December 2012,” said Justin Pettett, Pryme’s Managing Director.

Use of Proceeds

Proceeds from the Placement will be utilised for general working capital requirements. Following the Placement Pryme’s available cash balance is approximately $3.1 million. The capital structure of Pryme post the Placement is as follows:

Shares on Issue: 289,708,568 Options on Issue: 9,521,250

The options on issue are unlisted with an expiry date of 30 November 2013 and an exercise price of A$0.15 per option.

For further information please contact:

Justin Pettett Managing Director Pryme Energy Limited Telephone: +61 7 3371 1103

Ryan Messer Chief Operating Officer Pryme Energy Limited Telephone: +1 713 401 9806

Website: www.prymeenergy.com

ASX Code: PYM OTCQX Code: POGLY

Competent Person Statement and Disclaimer

The information contained in this announcement has been reviewed by Mr Greg Short, BSc. Geology (Hons), a Director of Pryme who has more than 33 years’ experience in the practise of petroleum geology. Mr Short reviewed this announcement and consents to the inclusion of the geological and engineering descriptions and any estimated hydrocarbons in place in the form and context in which they appear. Any resource estimates contained in this report are in accordance with the standard definitions set out by the Society of Petroleum Engineers, further information on which is available at www.spe.org.

==> picture [596 x 96] intentionally omitted <==

Appendix 3B New issue announcement

Rule 2.7, 3.10.3, 3.10.4, 3.10.5

Appendix 3B

New issue announcement, application for quotation of additional securities and agreement

Information or documents not available now must be given to ASX as soon as available. Information and documents given to ASX become ASX’s property and may be made public.

Introduced 01/07/96 Origin: Appendix 5 Amended 01/07/98, 01/09/99, 01/07/00, 30/09/01, 11/03/02, 01/01/03, 24/10/05, 01/08/12

Name of entity

Pryme Energy Limited

ABN

75 117 387 354

We (the entity) give ASX the following information.

Part 1 - All issues

You must complete the relevant sections (attach sheets if there is not enough space).

1 +Class of+securities issued or to be issued 2 Number of+securities issued or to be issued (if known) or maximum number which may be issued 3 Principal terms of the +securities (eg, if options, exercise price and expiry date; if partly paid +securities, the amount outstanding and due dates for payment; if +convertible securities, the conversion price and dates for conversion)	Fully paid ordinary shares
	12,340,289
	Fully paid ordinary shares

• See chapter 19 for defined terms.

Appendix 3B Page 1

01/08/2012

Appendix 3B New issue announcement

4 Do the+securities rank equally in all respects from the date of allotment with an existing+class of quoted+securities? If the additional securities do not rank equally, please state: • the date from which they do • the extent to which they participate for the next dividend, (in the case of a trust, distribution) or interest payment • the extent to which they do not rank equally, other than in relation to the next dividend, distribution or interest payment 5 Issue price or consideration 6 Purpose of the issue (If issued as consideration for the acquisition of assets, clearly identify those assets) 6a Is the entity an+eligible entity that has obtained security holder approval under rule 7.1A? If Yes, complete sections 6b – 6h in relation to the+securities the subject of this Appendix 3B, and comply with section 6i 6b The date the security holder resolution under rule 7.1A was passed 6c Number of+securities issued without security holder approval under rule 7.1	Yes
	$0.08
	Proceeds from the placement will be utilised for general working capital requirements.
	No
	N/A
	N/A

• See chapter 19 for defined terms.

Appendix 3B Page 2

01/08/2012

Appendix 3B New issue announcement

6d Number of+securities issued with security holder approval under rule 7.1A 6e Number of+securities issued with security holder approval under rule 7.3, or another specific security holder approval (specify date of meeting) 6f Number of securities issued under an exception in rule 7.2 6g If securities issued under rule 7.1A, was issue price at least 75% of 15 day VWAP as calculated under rule 7.1A.3? Include the issue date and both values. Include the source of the VWAP calculation. 6h If securities were issued under rule 7.1A for non-cash consideration, state date on which valuation of consideration was released to ASX Market Announcements 6i Calculate the entity’s remaining issue capacity under rule 7.1 and rule 7.1A – complete Annexure 1 and release to ASX Market Announcements 7 Dates of entering +securities into uncertificated holdings or despatch of certificates 8 Number and +class of all +securities quoted on ASX (including the securities in section 2 if applicable)	N/A
	N/A
	N/A
	N/A
	N/A
	N/A
	22 February 2013
	Number	+Class
	289,708,568	Ordinary shares

• See chapter 19 for defined terms.

Appendix 3B Page 3

01/08/2012

Appendix 3B New issue announcement

Number +Class 9 Number and +class of all 9,521,250 Unlisted option +securities not quoted on ASX expiring 30 ( including the securities in November 2013; section 2 if applicable) exercise price $0.15 10 Dividend policy (in the case of a None trust, distribution policy) on the increased capital (interests)

Part 2 - Bonus issue or pro rata issue

Items 11 – 33 are not applicable.

Part 3 - Quotation of securities

You need only complete this section if you are applying for quotation of securities

34 Type of securities ( tick one ) (a)[Securities described in Part 1 ]

(b)[All other securities ] Example: restricted securities at the end of the escrowed period, partly paid securities that become fully paid, employee incentive share securities when restriction ends, securities issued on expiry or conversion of convertible securities

Entities that have ticked box 34(a)

Additional securities forming a new class of securities

Items 35 - 42 are not applicable.

• See chapter 19 for defined terms.

Appendix 3B Page 4

01/08/2012

Appendix 3B New issue announcement

Quotation agreement

• 1 +Quotation of our additional +securities is in ASX’s absolute discretion. ASX may quote the[+] securities on any conditions it decides.

• 2 We warrant the following to ASX.

• The issue of the[+] securities to be quoted complies with the law and is not for an illegal purpose.

• There is no reason why those[+] securities should not be granted +quotation.

• An offer of the[+] securities for sale within 12 months after their issue will not require disclosure under section 707(3) or section 1012C(6) of the Corporations Act.

Note: An entity may need to obtain appropriate warranties from subscribers for the securities in order to be able to give this warranty

• Section 724 or section 1016E of the Corporations Act does not apply to any applications received by us in relation to any[+] securities to be quoted and that no-one has any right to return any[+] securities to be quoted under sections 737, 738 or 1016F of the Corporations Act at the time that we request that the[+] securities be quoted.

• If we are a trust, we warrant that no person has the right to return the +securities to be quoted under section 1019B of the Corporations Act at the time that we request that the[+] securities be quoted.

• 3 We will indemnify ASX to the fullest extent permitted by law in respect of any claim, action or expense arising from or connected with any breach of the warranties in this agreement.

• 4 We give ASX the information and documents required by this form. If any information or document not available now, will give it to ASX before +quotation of the +securities begins. We acknowledge that ASX is relying on the information and documents. We warrant that they are (will be) true and complete.

Sign here: ...................................................... Date: 22 February 2013 (Director)

Print name: Justin Pettett

== == == == ==

• See chapter 19 for defined terms.

Appendix 3B Page 5

01/08/2012

Appendix 3B New issue announcement

Appendix 3B – Annexure 1

Calculation of placement capacity under rule 7.1 and rule 7.1A for +eligible entities

Introduced 01/08/12

Part 1

Rule 7.1 – Issues exceeding 15% of capital

Step 1: Calculate “A”, the base figure from which the placement capacity is calculated

Insert number of fully paid ordinary securities on issue 12 months before date of issue or agreement to issue

Add the following:

• Number of fully paid ordinary securities issued in that 12 month period under an exception in rule 7.2

• Number of fully paid ordinary securities issued in that 12 month period with shareholder approval

• Number of partly paid ordinary securities that became fully paid in that 12 month period

Note:

• Include only ordinary securities here – other classes of equity securities cannot be added

• Include here (if applicable) the securities the subject of the Appendix 3B to which this form is annexed

• It may be useful to set out issues of securities on different dates as separate line items

• Subtract the number of fully paid ordinary securities cancelled during that 12 month period

• “A”

• See chapter 19 for defined terms.

Appendix 3B Page 6

01/08/2012

Appendix 3B New issue announcement

Step 2: Calculate 15% of “A”
“B”	0.15 [Note: this value cannot be changed]
Multiply“A” by 0.15
Step 3: Calculate “C”, the amount of placement capacity under rule 7.1 that has already been used
Insertnumber of equity securities issued or agreed to be issued in that 12 month period not counting_those issued: • Under an exception in rule 7.2 • Under rule 7.1A • With security holder approval under rule 7.1 or rule 7.4 _Note: • This applies to equity securities, unless specifically excluded – not just ordinary securities • Include here (if applicable ) the securities the subject of the Appendix 3B to which this form is annexed • It may be useful to set out issues of securities on different dates as separate line items
“C”
Step 4: Subtract “C” from [“A” x “B”] to calculate remaining placement capacity under rule 7.1
“A” x 0.15 Note: number must be same as shown in Step 2
Subtract“C” Note: number must be same as shown in Step 3
Total[“A” x 0.15] – “C”	[Note: this is the remaining placement capacity under rule 7.1]

• See chapter 19 for defined terms.

Appendix 3B Page 7

01/08/2012

Appendix 3B New issue announcement

Part 2

Rule 7.1A – Additional placement capacity for eligible entities

Step 1: Calculate “A”, the base figure from which the placement capacity is calculated

“A” Note: number must be same as shown in Step 1 of Part 1

Step 2: Calculate 10% of “A”

“D” 0.10 Note: this value cannot be changed Multiply “A” by 0.10

Step 3: Calculate “E”, the amount of placement capacity under rule 7.1A that has already been used

Insert number of equity securities issued or agreed to be issued in that 12 month period under rule 7.1A

Notes:

• This applies to equity securities – not just ordinary securities

• Include here – if applicable – the securities the subject of the Appendix 3B to which this form is annexed

• Do not include equity securities issued under rule 7.1 (they must be dealt with in Part 1), or for which specific security holder approval has been obtained

• It may be useful to set out issues of securities on different dates as separate line items

“E”

• See chapter 19 for defined terms.

Appendix 3B Page 8

01/08/2012

Appendix 3B New issue announcement

Step 4: Subtract “E” from [“A” x “D”] to calculate remaining placement capacity under rule 7.1A

“A” x 0.10 Note: number must be same as shown in Step 2 Subtract “E” Note: number must be same as shown in Step 3 Total [“A” x 0.10] – “E” Note: this is the remaining placement capacity under rule 7.1A

• See chapter 19 for defined terms.

Appendix 3B Page 9

01/08/2012