GALILEO MINING LTD — Capital/Financing Update 2021

Nov 7, 2021

==> picture [119 x 33] intentionally omitted <==

8 November 2021 ASX: GAL

GALILEO SECURES STRATEGIC FRASER RANGE TENEMENT

Corporate Directory

Directors

Chairman & MD Brad Underwood

Non-Executive Director Noel O’Brien

Non-Executive Director Mathew Whyte

Highlights

• Highly prospective greenfield Tenement acquired along strike from Galileo’s existing Fraser Range targets

• No previous exploration provides Galileo with a first mover advantage for potential new discoveries

• Tenement E28/2797 is six kilometres along strike from the Lantern South Prospect where previous drilling intersected nickel-copper sulphides[1]

Projects

Fraser Range Project Nickel-Copper-Cobalt

Norseman Project Palladium-Nickel-Cobalt

• 41 metres @ 0.19% nickel & 0.14% copper (LARC012)

• 5 metres @ 0.49% nickel & 0.46% copper (LARC003) including

• 1 metre @ 0.66% nickel & 0.75% copper

• Additional 70 km[2] of prospective ground increases Galileo’s total Fraser Range tenement position to 672 km[2]

• Interpreted magmatic intrusions to be targeted with ground EM surveying commencing in December

==> picture [121 x 123] intentionally omitted <==

Contact Details

T: +61 8 9463 0063 E: info@galmining.com.au W: www.galileomining.com.au 13 Colin St, West Perth, WA

Galileo Mining Ltd (ASX: GAL, “Galileo” or the “Company”) is pleased to announce that it has purchased 100% of tenement E28/2797 (the “Tenement”) along strike of the Company’s nickel-copper sulphide prospects in the Fraser Range region of Western Australia.

Commenting on the Tenement acquisition Galileo Managing Director Brad Underwood said; “ We are very pleased to have secured a strategic new tenement in a critical part of the Fraser Range Belt. The Tenement is along strike from our current work areas in the Fraser Range and is particularly close to our Lantern South Prospect where nickel-copper sulphides have been intercepted in drilling. The Tenement has never been drilled and, given its proximity to known prospects, is one of the best unexplored tenements in the Fraser Range.

Ground EM surveying to cover all the interpreted prospective zones on the new Tenement is planned to start in December. If positive results from this target

==> picture [594 x 25] intentionally omitted <==

(1) Refer to Galileo’s ASX announcement dated 17th March 2020 and 29th September 2020

Page 1 | 9

==> picture [79 x 123] intentionally omitted <==

==> picture [120 x 32] intentionally omitted <==

generation work are obtained we will move to the target testing phase of exploration involving drilling. We are fully committed to our Fraser Range work programs and believe the possibility for new mineral discoveries in the region is substantial.”

Interpretation of detailed aeromagnetic surveying over E28/2797 has identified intrusive rock signatures with potential for Nova style nickel-copper mineralisation (Figure 1). Ground EM surveying of the tenement is scheduled to begin in December in conjunction with the Company’s ongoing target generation program. Full EM survey of the prospective zones on the new Tenement is expected to be completed in the first quarter of 2022. Positive EM results will lead to drilling programs to test targets for economic mineralisation.

The Tenement was purchased from individual tenement holder Mrs S. E. Creasy for a Total Consideration of $170,000 being $89,920 cash and 308,000 Galileo shares at a deemed price of $0.26 per share (Consideration Shares). The Consideration Shares are subject to a 12-month voluntary escrow agreement from the date of issue and were issued within the Company’s 15% placement capacity in accordance with ASX Listing Rule 7.1.

Figure 1 ––New Fraser Range Greenfield Tenement E28/2797 with Existing Prospect Locations and Interpreted Intrusive Targets (over TMI Magnetic Image)

==> picture [537 x 369] intentionally omitted <==

==> picture [594 x 25] intentionally omitted <==

Page 2 | 9

==> picture [79 x 123] intentionally omitted <==

==> picture [120 x 32] intentionally omitted <==

Figure 2 – Galileo Prospect Locations in the Fraser Range Nickel Belt

==> picture [485 x 627] intentionally omitted <==

==> picture [594 x 25] intentionally omitted <==

Page 3 | 9

==> picture [120 x 32] intentionally omitted <==

Competent Person Statement

The information in this report that relates to Exploration Results is based on, and fairly represents, information and supporting documentation prepared by Mr Brad Underwood, a Member of the Australasian Institute of Mining and Metallurgy, and a full time employee of Galileo Mining Ltd. Mr Underwood has sufficient experience that is relevant to the styles of mineralisation and types of deposit under consideration, and to the activity being undertaken, to qualify as a Competent Person as defined in the 2012 Edition of the “Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves” (JORC Code). Mr Underwood consents to the inclusion in the report of the matters based on his information in the form and context in which it appears.

With regard to the Company’s ASX Announcements referenced in the above Announcement, the Company is not aware of any new information or data that materially affects the information included in the Announcements.

Authorised for release by the Galileo Board of Directors.

Investor information: phone Galileo Mining on + 61 8 9463 0063 or email info@galmining.com.au

Media:

David Tasker Managing Director Chapter One Advisors E: dtasker@chapteroneadvisors.com.au T: +61 433 112 936

About Galileo Mining:

Galileo Mining Ltd (ASX: GAL) is focussed on the exploration and development of nickel, copper and cobalt resources in Western Australia. GAL has Joint Ventures with the Creasy Group over tenements in the Fraser Range which are highly prospective for nickel-copper sulphide deposits similar to the operating Nova mine. GAL also holds tenements near Norseman with over 26,000 tonnes of contained cobalt, and 122,000 tonnes of contained nickel, in JORC compliant resources (see JORC Table below).

JORC Mineral Resource Estimates for the Norseman Cobalt Project (“Estimates”) (refer to ASX “Prospectus” announcement dated May 25[th] 2018 and ASX announcement dated 11[th] December 2018, accessible at http://www.galileomining.com.au/investors/asx-announcements/). Galileo confirms that all material assumptions and technical parameters underpinning the Estimates continue to apply and have not materially changed).

Cut-off Cobalt %	Class	Tonnes Mt		Co		Ni
			%	Tonnes	%	Tonnes
MT THIRSTY SILL
0.06 %	Indicated Inferred Total	10.5 2.0 12.5	0.12 0.11 0.11	12,100 2,200 14,300	0.58 0.51 0.57	60,800 10,200 71,100
MISSION SILL
0.06 %	Inferred	7.7	0.11	8,200	0.45	35,000
GOBLIN
0.06 %	Inferred	4.9	0.08	4,100	0.36	16,400
TOTAL JORC COMPLIANT RESOURCES
0.06 %	Total	25.1	0.11	26,600	0.49	122,500

==> picture [594 x 25] intentionally omitted <==

Page 4 | 9

==> picture [79 x 123] intentionally omitted <==

==> picture [120 x 32] intentionally omitted <==

Appendix 1: JORC Code, 2012 Edition – Table 1

Galileo Mining Ltd – Fraser Range Project

Section 1 Sampling Techniques and Data

(Criteria in this section apply to all succeeding sections.)

Criteria	JORC Code explanation	Commentary
Sampling techniques	• Nature and quality of sampling (eg cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling. • Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used. • Aspects of the determination of mineralisation that are Material to the Public Report. • In cases where ‘industry standard’ work has been done this would be relatively simple (eg ‘reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (eg submarine nodules) may warrant disclosure of detailed information.	•No drilling was completed in this phase of works.
Drilling techniques	• Drill type (eg core, reverse circulation, open- hole hammer, rotary air blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard tube, depth of diamond tails, face- sampling bit or other type, whether core is _oriented and ifso, by what method, etc). _	•No drilling was completed in this phase of works.
Drill sample recovery	• Method of recording and assessing core and chip sample recoveries and results assessed. • Measures taken to maximise sample recovery and ensure representative nature of the samples. • Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material.	•No drilling was completed in this phase of works.
Logging	• Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies. • Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography. • The total length and percentage of the relevant _intersections logged. _	•No drilling was completed in this phase of works.

==> picture [594 x 25] intentionally omitted <==

Page 5 | 9

	Criteria	JORC Code explanation	Commentary
	Sub-sampling techniques and sample preparation	• If core, whether cut or sawn and whether quarter, half or all core taken. • If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry. • For all sample types, the nature, quality and appropriateness of the sample preparation technique. • Quality control procedures adopted for all sub- sampling stages to maximise representivity of samples. • Measures taken to ensure that the sampling is representative of the in situ material collected, including for instance results for field duplicate/second-half sampling. • Whether sample sizes are appropriate to the _grainsize of the material being sampled. _	•No drilling was completed in this phase of works.
	Quality of assay data and laboratory tests	• The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total. • For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc. • Nature of quality control procedures adopted (eg standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (ie lack of bias) and precision _have been established. _	•No drilling was completed in this phase of works.
	Verification of sampling and assaying	• The verification of significant intersections by either independent or alternative company personnel. • The use of twinned holes. • Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols. • Discuss any adjustment to assay data.	•No drilling was completed in this phase of works.
	Location of data points	• Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation. • Specification of the grid system used. • Quality and adequacy of topographic control.	•No drilling was completed in this phase of works. •All co-ordinates are in MGA94 datum, Zone 51. •Topographic control has an accuracy of 2m based on detailed satellite imagery derivedDTM.
	Data spacing and distribution	• Data spacing for reporting of Exploration Results. • Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied. • _Whether sample compositing has been applied. _	•N/A

==> picture [594 x 25] intentionally omitted <==

Page 6 | 9

	Criteria	JORC Code explanation	Commentary
	Orientation of data in relation to geological structure	• Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type. • If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material.	•No drilling was completed in this phase of works.
	Sample security	• The measures taken to ensure sample security.	•N/A
	Audits or reviews	• The results of any audits or reviews of sampling techniques and data.	•N/A

Section 2 Reporting of Exploration Results

(Criteria listed in the preceding section also apply to this section.)

Criteria	JORC Code explanation	Commentary
Mineral tenement and land tenure status	• Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings. • The security of the tenure held at the time of reporting along with any known impediments to obtaining a licence to operate in the area.	•The Fraser Range Project comprises six granted exploration licenses covering 672km2 •Kitchener JV tenement E28/2064 (67% NSZ Resources Pty Ltd, 33% Great Southern Nickel Pty Ltd). •Kitchener Area E28/2912, E28/2949, E28/2797 (100% owned NSZ Resources Pty Ltd) •Yardilla JV tenements: E63/1539, E63/1623, E63/1624 (67% FSZ Resources Pty Ltd, 33% Dunstan Holdings Pty Ltd) •NSZ Resources Pty Ltd & FSZ Resources Pty Ltd are wholly owned subsidiaries of Galileo Mining Ltd. •Great Southern Nickel Pty Ltd and Dunstan Holdings Pty Ltd are entities of Mark Creasy •The Kitchener Area is approximately 250km east of Kalgoorlie on vacant crown land and on the Boonderoo Pastoral Station. •The Yardilla Area is approximately 90km east of Norseman on vacant crown land and on the Fraser Range Pastoral Station. •Both the Kitchener Area and the Yardilla Area are 100% covered by the Ngadju Native Title Determined Claim. •The tenements are in good standing and there are no known impediments.
Exploration done by other parties	• Acknowledgment and appraisal of exploration by other parties.	•NA
Geology	• Deposit type, geological setting and style of mineralisation.	•The target geology is indicative of magmatic sulphide mineralisation hosted in or associated with mafic-ultramafic intrusions within the Fraser Complex of the Albany-Fraser Orogeny. •The underlying unweatheredlithologyis granulite

==> picture [594 x 25] intentionally omitted <==

Page 7 | 9

	Criteria	JORC Code explanation	Commentary
			facies metamorphosed and partially retrogressed sedimentary, mafic and ultramafic igneous rocks as determined by petrographic work.
	Drill hole Information	• A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: o easting and northing of the drill hole collar o elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole collar o dip and azimuth of the hole o down hole length and interception depth o hole length. • If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly _explain why this is the case. _	•No drilling reported
	Data aggregation methods	• In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (eg cutting of high grades) and cut-off grades are usually Material and should be stated. • Where aggregate intercepts incorporate short lengths of high grade results and longer lengths of low grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail. • The assumptions used for any reporting of metal equivalent values should be clearly stated.	•No assays reported
	Relationship between mineralisation widths and intercept lengths	• These relationships are particularly important in the reporting of Exploration Results. • If the geometry of the mineralisation with respect to the drill hole angle is known, its nature should be reported. • If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (eg ‘down hole length, true	•No drilling completed

==> picture [594 x 25] intentionally omitted <==

Page 8 | 9

	Criteria	JORC Code explanation	Commentary
		width not known’).
	Diagrams	• Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any discovery being reported These should include, but not be limited to a plan view of drill hole collar locations and appropriate _sectional views. _	•Refer to Figures in body of report
	Balanced reporting	• Where comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading _reporting of Exploration Results. _	•All available relevant information is presented.
	Other substantive exploration data	• Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical survey results; bulk samples – size and method of treatment; metallurgical test results; bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating _substances. _	•Detailed 50m line spaced aeromagnetic data has been used for interpretation of underlying geology and targeting of areas for ongoing work. •Aeromagnetic data was collected using a Geometrics G-823 Caesium vapor magnetometer at an average flying height of 30m.
	Further work	• The nature and scale of planned further work (eg tests for lateral extensions or depth extensions or large-scale step-out drilling). • Diagrams clearly highlighting the areas of possible extensions, including the main geological interpretations and future drilling areas, provided this information is _not commercially sensitive. _	•EM surveying over areas interpreted as prospective for nickel sulphide mineralisation •Drill testing of any target zones resulting from EM surveying

==> picture [594 x 25] intentionally omitted <==

Page 9 | 9