CORE MOLDING TECHNOLOGIES INC - Interim / Quarterly Report 2009

10-Q 1 c89281e10vq.htm FORM 10-Q Form 10-Q PAGEBREAK

Table of Contents

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q

(Mark One)

þ QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

xbrl,dc

For the quarterly period ended June 30, 2009

/xbrl,dc

o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from to

Commission File Number 001-12505

CORE MOLDING TECHNOLOGIES, INC.

(Exact name of registrant as specified in its charter)

Delaware	31-1481870
(State or other jurisdiction	(I.R.S. Employer Identification No.)
incorporation or organization)
800 Manor Park Drive
Columbus, Ohio	43228-0183
(Address of principal executive office)	(Zip Code)

Registrants telephone number, including area code ( 614) 870-5000

N/A

Former name, former address and former fiscal year, if changed since last report.

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes þ NO o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

Yes o NO o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definition of accelerated filer, large accelerated filer, and smaller reporting company, in Rule 12b-2 of the Exchange Act (Check one).

Large accelerated filer o Accelerated filer o Non-accelerated filer o (Do not check if a smaller reporting company) Smaller reporting company þ

Indicate by check mark whether the registrant is a shell company as defined in Rule 12b-2 of the Exchange Act.

Yes o NO þ

As of August 14, 2009, the latest practicable date, 7,001,106 shares of the registrants common stock were issued and outstanding.

Folio /Folio

PAGEBREAK

TOC

Table of Contents

Part I Financial Information
Item 1. Financial Statements
Consolidated Balance Sheets	3
Consolidated Statements of Operations	4
Consolidated Statement of Stockholders Equity	5
Consolidated Statements of Cash Flows	6
Notes to Consolidated Financial Statements	7
Item 2. Managements Discussion and Analysis of Financial Condition and Results
of Operations	16
Item 3. Not required for smaller reporting company
Item 4T. Controls and Procedures	23
Part II Other Information	24
Item 1. Legal Proceedings	24
Item 1A. Risk Factors	24
Item 2. Unregistered Sales of Equity Securities and Use of Proceeds	24
Item 3. Defaults Upon Senior Securities	24
Item 4. Submission of Matters to a Vote of Security Holders	24
Item 5. Other Information	24
Item 6. Exhibits	24
Signatures	25
Index to Exhibits	26
Ex-31(a)
Ex-31(b)
Ex-32(a)
Ex-32(b)

/TOC

Folio 2 /Folio

PAGEBREAK

Table of Contents

Part 1 Financial Information Core Molding Technologies, Inc. and Subsidiaries

xbrl,bs

Unaudited Consolidated Balance Sheets

xbrl,body

	June 30, — 2009	2008
Assets
Current Assets:
Cash	$	$
Accounts receivable (less allowance for doubtful accounts: June
30, 2009 $121,000; December 31, 2008 $109,000)	12,237,490		15,435,103
Inventories:
Finished goods	1,900,325		3,533,246
Work in process	1,359,870		1,458,602
Stores	4,323,528		4,740,375
Total inventories	7,583,723		9,732,223
Deferred tax asset-current portion	1,869,198		1,869,198
Foreign sales tax receivable	540,663		584,230
Income tax receivable	701,573
Prepaid expenses and other current assets	1,612,037		876,094
Total current assets	24,544,684		28,496,848
Property, plant and equipment	80,499,534		71,970,638
Accumulated depreciation	(34,842,291	)	(33,155,187	)
Property, plant and equipment net	45,657,243		38,815,451
Deferred tax asset	5,308,003		5,318,623
Goodwill	1,097,433		1,097,433
Other assets	63,026		102,737
Total	$ 76,670,389	$	73,831,092
Liabilities and Stockholders Equity
Liabilities:
Current liabilities
Current portion of long-term debt	$ 3,645,000	$	2,905,716
Notes payable line of credit	873,234		1,193,965
Current portion of postretirement benefits liability	520,000		520,000
Accounts payable	5,025,930		6,866,388
Tooling in progress	898,075		212,065
Accrued liabilities:
Compensation and related benefits	3,727,789		4,715,884
Interest payable	143,273		96,103
Taxes			427,972
Other	958,301		928,080
Total current liabilities	15,791,602		17,866,173
Long-term debt	17,177,848		11,129,184
Interest rate swap	219,276		502,381
Postretirement benefits liability	15,834,387		15,357,897
Commitments and Contingencies
Stockholders Equity:
Preferred stock $0.01 par value, authorized shares 10,000,000;
Outstanding shares: June 30, 2009 and December 31, 2008 0
Common stock $0.01 par value, authorized shares 20,000,000;
Outstanding shares: 6,794,063 at June 30, 2009 and
6,765,790 at December 31, 2008	67,941		67,658
Paid-in capital	23,180,383		23,002,472
Accumulated other comprehensive loss, net of income tax benefit	(1,072,363	)	(1,092,977	)
Treasury stock	(26,179,054	)	(26,179,054	)
Retained earnings	31,650,369		33,177,358
Total stockholders equity	27,647,276		28,975,457
Total	$ 76,670,389	$	73,831,092

See notes to unaudited consolidated financial statements.

/xbrl,bs

Folio 3 /Folio

PAGEBREAK

Table of Contents

Core Molding Technologies, Inc. and Subsidiaries

xbrl,op

Consolidated Statements of Operations

xbrl,body

(Unaudited)

	Three Months Ended
	June 30,			June 30,
	2009		2008	2009			2008
Net sales:
Products	$ 16,643,805		$ 29,395,247	$	34,474,085		$ 55,378,459
Tooling	656,303		543,447		1,210,140		3,645,672
Total sales	17,300,108		29,938,694		35,684,225		59,024,131
Total cost of sales	16,315,841		24,317,730		33,126,619		49,086,962
Gross margin	984,267		5,620,964		2,557,606		9,937,169
Total selling, general and
administrative expense	2,255,738		2,993,819		4,755,741		5,808,154
(Loss) income before interest and taxes	(1,271,471	)	2,627,145		(2,198,135	)	4,129,015
Interest expense	(30,241	)	(132,445	)	(140,395	)	(361,471	)
(Loss) income before income taxes	(1,301,712	)	2,494,700		(2,338,530	)	3,767,544
Income tax (benefit) expense	(434,558	)	778,439		(811,541	)	1,187,130
Net (loss) income	$ (867,154	)	$ 1,716,261	$	(1,526,989	)	$ 2,580,414
Net (loss) income per common share:
Basic	$ (0.13	)	$ 0.25	$	(0.23	)	$ 0.38
Diluted	$ (0.13	)	$ 0.24	$	(0.23	)	$ 0.37
Weighted average shares outstanding:
Basic	6,784,442		6,740,818		6,769,442		6,736,043
Diluted	6,784,442		7,064,615		6,769,442		7,056,433

See notes to unaudited consolidated financial statements.

/xbrl,op

Folio 4 /Folio

PAGEBREAK

Table of Contents

Core Molding Technologies, Inc. and Subsidiaries

xbrl,se

Consolidated Statement of Stockholders Equity

xbrl,body

(Unaudited)


Common Stock					Other					Total
Outstanding			Paid-In	Retained	Comprehensive			Treasury		Stockholders
Shares		Amount	Capital	Earnings	Income (Loss)			Stock		Equity
Balance at January 1,
2009	6,765,790	$ 67,658	$ 23,002,472	$ 33,177,358	$	(1,092,977	)	$ (26,179,054	)	$ 28,975,457
Net loss				(1,526,989	)					(1,526,989	)
Hedge accounting
effect of the interest
rate swaps, net of
deferred income tax
expense of $10,030						20,614				20,614
Comprehensive
loss										(1,506,375	)
Restricted stock	28,273	283	145,770							146,053
Share-based
compensation			32,141							32,141
Balance at June 30, 2009	6,794,063	$ 67,941	$ 23,180,383	$ 31,650,369	$	(1,072,363	)	$ (26,179,054	)	$ 27,647,276

See notes to unaudited consolidated financial statements.

/xbrl,se

Folio 5 /Folio

PAGEBREAK

Table of Contents

Core Molding Technologies, Inc. and Subsidiaries

xbrl,cf

Consolidated Statements of Cash Flows

xbrl,body

(Unaudited)

	Six Months Ended
	June 30,
	2009		2008
Cash flows from operating activities:
Net (loss) income	$ (1,526,989	)	$ 2,580,414
Adjustments to reconcile net (loss) income to net cash
provided by operating activities:
Depreciation and amortization	1,849,330		1,804,777
Deferred income taxes	590		(22,778	)
Ineffectiveness of swap	(252,461	)	11,551
Share based compensation	178,194		168,262
Loss on disposal of assets	49,405
Gain on translation of foreign currency financial statements	(71,217	)	(131,452	)
Change in operating assets and liabilities:
Accounts receivable	3,197,613		(4,700,062	)
Inventories	2,148,500		871,507
Prepaid and other assets	(493,832	)	(176,804	)
Accounts payable	(1,741,123	)	(1,092,811	)
Accrued and other liabilities	(1,354,238	)	1,520,140
Postretirement benefits liability	476,488		710,270
Net cash provided by operating activities	2,460,260		1,543,014
Cash flows from investing activities:
Purchase of property, plant and equipment	(8,703,156	)	(573,022	)
Net cash used in investing activities	(8,703,156	)	(573,022	)
Cash flows from financing activities:
Financing costs for new credit agreement	(224,321	)
Gross repayments on line of credit	(27,109,191	)	(20,586,168	)
Gross borrowings on line of credit	26,788,460		20,496,804
Payments of principal on construction term loan	(142,857	)
Payments of principal on secured note payable	(642,858	)	(642,858	)
Payment of principal on industrial revenue bond	(305,000	)	(285,000	)
Borrowing on construction loans	7,878,663
Proceeds from issuance of common stock			47,230
Net cash provided by (used in) financing activities	6,242,896		(969,992	)
Net change in cash and cash equivalents
Cash and cash equivalents at beginning of period
Cash and cash equivalents at end of period	$		$
Cash paid for:
Interest	$ 433,240		$ 340,230
Income taxes (net of tax refunds)	$ 326,000		$ 342,622
Non Cash:
Fixed asset purchases in accounts payable	$ 175,317		$ 169,901

See notes to unaudited consolidated financial statements.

/xbrl,cf

Folio 6 /Folio

PAGEBREAK

Table of Contents

xbrl,ns

Core Molding Technologies, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

(Unaudited)

xbrl,n

1. Basis of Presentation

xbrl,body

The accompanying unaudited consolidated financial statements have been prepared in accordance with the instructions to Form 10-Q and include all of the information and disclosures required by accounting principles generally accepted in the United States of America for interim reporting, which are less than those required for annual reporting. In the opinion of management, the accompanying unaudited consolidated financial statements contain all adjustments (all of which are normal and recurring in nature) necessary to present fairly the financial position of Core Molding Technologies, Inc. and its subsidiaries (Core Molding Technologies or the Company) at June 30, 2009, the results of operations for the three and six months ended June 30, 2009, and the cash flows for the six months ended June 30, 2009. The Consolidated Notes to Financial Statements, which are contained in the 2008 Annual Report to Shareholders, should be read in conjunction with these consolidated financial statements.

Core Molding Technologies and its subsidiaries operate in the plastics market in a family of products known as reinforced plastics. Reinforced plastics are combinations of resins and reinforcing fibers (typically glass or carbon) that are molded to shape. Core Molding Technologies operates four production facilities in Columbus, Ohio; Batavia, Ohio; Gaffney, South Carolina; and Matamoros, Mexico. The Columbus and Gaffney facilities produce reinforced plastics by compression molding sheet molding compound (SMC) in a closed mold process. The Batavia facility produces reinforced plastic products by a robotic spray-up open mold process and resin transfer molding (RTM) closed mold process utilizing multiple insert tooling (MIT). The Matamoros facility utilizes spray-up and hand lay-up open mold processes as well as RTM and SMC closed mold process to produce reinforced plastic products.

xbrl,n

2. Net (Loss) Income per Common Share

xbrl,body

Net (loss) income per common share is computed based on the weighted average number of common shares outstanding during the period. Diluted net income per common share is computed similarly but include the effect of the assumed exercise of dilutive stock options and restricted stock under the treasury stock method.

The computation of basic and diluted net (loss) income per common share is as follows:

	Three Months Ended
	June 30,			June 30,
	2009		2008	2009			2008
Net (loss) income	$ (867,154	)	$ 1,716,261	$	(1,526,989	)	$ 2,580,414
Weighted average common shares
outstanding	6,784,442		6,740,818		6,769,442		6,736,043
Plus: dilutive options assumed exercised			566,700				566,700
Less: shares assumed repurchased with
proceeds from exercise			(287,011	)			(288,024	)
Plus: dilutive effect of nonvested
restricted
stock grants			44,108				41,714
Weighted average common and potentially
issuable common shares outstanding	6,784,442		7,064,615		6,769,442		7,056,433
Basic net (loss) income per common share	$ (0.13	)	$ 0.25	$	(0.23	)	$ 0.38
Diluted net
(loss) income per common share	$ (0.13	)	$ 0.24	$	(0.23	)	$ 0.37

All 570,225 shares of unexercised stock options at June 30, 2009 and 28,200 stock options at June 30, 2008 were not included in diluted earnings per share as they were anti-dilutive.

Folio 7 /Folio

PAGEBREAK

Table of Contents

xbrl

xbrl,n

3. Sales

xbrl,body

Core Molding Technologies currently has two major customers, Navistar, Inc. (Navistar) formerly known as International Truck & Engine Corporation, and PACCAR, Inc. (PACCAR). Major customers are defined as customers whose sales individually consist of more than ten percent of total sales. The following table presents sales revenue for the above-mentioned customers for the three and six months ended June 30, 2009 and 2008:

	Three Months Ended — June 30,		Six Months Ended — June 30,
	2009	2008	2009	2008
Navistar product sales	$ 8,979,649	$ 16,624,481	$ 19,036,872	$ 30,099,452
Navistar tooling sales	171,953	36,522	474,748	2,793,471
Total Navistar sales	9,151,602	16,661,003	19,511,620	32,892,923
PACCAR product sales	5,482,819	7,668,656	9,674,548	15,074,287
PACCAR tooling sales	195,220	365,696	206,820	460,146
Total PACCAR sales	5,678,039	8,034,352	9,881,368	15,534,433
Other product sales	2,181,337	5,102,110	5,762,665	10,204,720
Other tooling sales	289,130	141,229	528,572	392,055
Total other sales	2,470,467	5,243,339	6,291,237	10,596,775
Total product sales	16,643,805	29,395,247	34,474,085	55,378,459
Total tooling sales	656,303	543,447	1,210,140	3,645,672
Total sales	$ 17,300,108	$ 29,938,694	$ 35,684,225	$ 59,024,131

xbrl,n

4. Comprehensive (Loss) Income

xbrl,body

Comprehensive (loss) income represents net (loss) income plus the results of certain equity changes not reflected in the Consolidated Statements of Operations. The components of comprehensive (loss) income, net of tax, are as follows:

	Three Months Ended			Six Months Ended
	June 30,			June 30,
	2009		2008	2009		2008
Net (loss) income	$ (867,154	)	$ 1,716,261	$ (1,526,989	)	$ 2,580,414
Hedge accounting effect of
interest rate swaps, net
of deferred income tax
expense of $15,620, and
$10,030 for the three and
six months ended June 30,
2009 and deferred income
tax expense of $33,257 and
tax benefit of $2,787 for
the three and six months
ended June 30, 2008,
respectively	31,468		64,559	20,614		(5,409	)
Amortization of previously
unrecognized
postretirement plan loss,
net of deferred tax
expense of $11,361 and
$22,722 for the three and
six months ended June 30,
2008, respectively.			20,638			41,277
Comprehensive (loss) income	$ (835,686	)	$ 1,801,458	$ (1,506,375	)	$ 2,616,282

Folio 8 /Folio

PAGEBREAK

Table of Contents

xbrl

xbrl,n

5. Postretirement Benefits

xbrl,body

The components of expense for all of Core Molding Technologies postretirement benefits plans for the three and six months ended June 30, 2009 and 2008 are as follows:

	Three Months Ended — June 30,		Six Months Ended — June 30,
	2009	2008	2009	2008
Pension expense:
Defined contribution plan
Contributions	$ 73,000	$ 122,000	$ 176,000	$ 249,000
Multi-employer plan
Contributions	87,000	130,000	195,000	263,000
Total pension expense	160,000	252,000	371,000	512,000
Health and life insurance:
Service cost	152,000	159,000	304,000	318,000
Interest cost	237,000	263,000	474,000	525,000
Amortization of net loss		32,000		64,000
Net periodic benefit cost	389,000	454,000	778,000	907,000
Total postretirement
benefits expense	$ 549,000	$ 706,000	$ 1,149,000	$ 1,419,000

Core Molding Technologies has made contributions of approximately $598,000 to pension plans and $302,000 of postretirement healthcare payments through June 30, 2009 and expects to make approximately $162,000 of multi-employer pension payments through the remainder of 2009. The Company also expects to make approximately $218,000 of postretirement healthcare payments through the remainder of 2009, all of which are accrued.

xbrl,n

6. Debt

xbrl,body

Credit Agreement; Amendment

In December of 2008, the Company and its subsidiary, Corecomposites de Mexico, S. de R.L. de C.V., entered into a Credit Agreement (the Credit Agreement) with KeyBank National Association (KeyBank) as a lender, lead arranger, sole book runner and administrative agent. Under the Credit Agreement, KeyBank has made certain loans, which include (i) a $12,000,000 construction loan, (ii) an $8,000,000 construction loan, (iii) an $8,000,000 revolving credit commitment, (iv) a $2,678,563 term loan to refinance a previous term loan with KeyBank, and (v) a letter of credit in an undrawn face amount of $3,332,493 with respect to the Companys existing industrial development revenue bond financing.

On March 31, 2009, the Company entered into a first amendment to the Credit Agreement with KeyBank (the First Amendment). Pursuant to the terms of the First Amendment, the lender agreed to modify certain terms of the Credit Agreement. These modifications included (1) modification of the definition of EBITDA to add back transition costs up to $3,200,000 associated with the transition and startup of the new production facility in Matamoros and add back non-cash compensation expense recorded under SFAS 123R (2) modification of the fixed charge definition to exclude from consolidated interest expense any measure of ineffectiveness from interest rate swaps and amortization of loan origination and issuance costs (3) modification of the leverage ratio from 3.0x to 3.2x at June 30, 2009, 3.4x at September 30, 2009, and 3.2x at December 31, 2009 (4) increase the applicable margin for interest rates applicable to LIBOR loans effective March 31, 2009 to 400 basis points for both construction loans and the revolving line of credit; all rates decrease 25 basis points upon reaching a leverage ratio of less than 2.25 to 1.00 (5) increase the letter of credit fee on the Industrial Revenue Bond to 300 basis points (6) increase the 1% Libor floor on the $8,000,000 construction loan and revolving line of credit to 1.5% and (7) implement a 1.5% Libor floor on the $12,000,000 construction loan.

On June 30, 2009, the Company entered into a second amendment (the Second Amendment) to the Credit Agreement, dated as of December 9, 2008, with KeyBank. Pursuant to the terms of the Second Amendment, the parties agreed to modify certain terms of the Credit Agreement. These modifications included (1) an increase in the applicable margin for interest rates applicable to LIBOR loans to 450 basis points, effective June 30, 2009, for both construction loans and the revolving line of credit; with all rates other than rates applicable to the term loan decreasing by 25 basis points upon reaching a leverage ratio of less than 2.25 to 1.00, (2) a decrease in the applicable margin for the interest rate applicable to the term loan to 200 basis points in excess of LIBOR or the Base Rate, (3) a change in the definition of consolidated EBITDA to add back non-cash post-retirement expenses minus retirement benefits paid in cash, (4) the deletion of the 150 basis point interest rate floor from the LIBOR rates applicable to the $8,000,000 and $12,000,000 construction loans and the revolving line of credit, and (5) the extension of the commitment for the revolving line of credit to April 30, 2011.

Folio 9 /Folio

PAGEBREAK

Table of Contents

xbrl

Bank Covenants

The Company is required to meet certain financial covenants included in the Credit Agreement with respect to leverage ratios, fixed charge ratios, capital expenditures as well as other customary affirmative and negative covenants. As of June 30, 2009, the Company was in compliance with its financial covenants associated with the loans made under the Credit Agreement as described above, as well as financial covenants contained in certain equipment leases to which the Company is a party.

Based upon the Companys forecasts, which are primarily based on industry analysts estimates of 2009 heavy and medium-duty truck production volumes as well as other assumptions management believes to be reasonable, management believes that the Company will be able to maintain compliance with the financial covenants set forth in the Credit Agreement, as amended by the First Amendment and Second Amendment, for the next 12 months. Management believes that cash flow from operating activities together with available borrowings under the Credit Agreement will be sufficient to meet Core Molding Technologies liquidity needs. However, if a material adverse change in the financial position of Core Molding Technologies should occur, or if actual sales or expenses are substantially different than what has been forecasted, Core Molding Technologies liquidity and ability to obtain further financing to fund future operating and capital requirements could be negatively impacted.

Interest Rate Swaps

In conjunction with its variable rate Industrial Revenue Bond (IRB) the Company has entered into an interest rate swap agreement, which is designated as a cash flow hedging instrument. Under this agreement, the Company pays a fixed rate of 4.89% to the counterparty and receives 76% of the 30-day commercial paper rate. The swap term and notional amount matches the payment schedule on the IRB with final maturity in April 2013. The difference paid or received varies as short-term interest rates change and is accrued and recognized as an adjustment to interest expense. While the Company is exposed to credit loss on its interest rate swap in the event of non-performance by the counterparty to the swap, management believes such non-performance is unlikely to occur given the financial resources of the counterparty. The effectiveness of the swap is assessed at each financial reporting date by comparing the commercial paper rate of the swap to the benchmark rate underlying the variable rate of the IRB. Any ineffectiveness of the swap is recorded as an adjustment to interest expense and historically has not been material. Interest income of $31,591 and interest expense of $11,551 was recorded for the six months ended June 30, 2009 and 2008, respectively, related to ineffectiveness of the swap. The fair value of the swap was recorded as a liability of $243,178 and $322,108 as of June 30, 2009 and December 31, 2008, respectively. None of the changes in fair value of the interest rate swap have been excluded from the assessment of hedge effectiveness.

Effective January 1, 2004, the Company entered into an interest rate swap agreement, which is designated as a cash flow hedge of the Companys bank note payable. Under this agreement, the Company pays a fixed rate of 3.75% to the counterparty and receives LIBOR. The swap term and notional amount match the payment schedule on the bank note payable with final maturity in January 2011. The interest rate swap is a highly effective hedge because the amount, benchmark interest rate index, term, and repricing dates of both the interest rate swap and the hedged variable interest cash flows are exactly the same. The fair value of the swap was recorded as a liability of $52,429 and $79,973 as of June 30, 2009 and December 31, 2008 respectively. While the Company is exposed to credit loss on its interest rate swap in the even of non-performance by the counterparty to the swap, management believes that such non-performance is unlikely to occur given the financial resources of the counterparty.

Effective December 18, 2008, the Company entered into an interest rate swap agreement that became effective May 1, 2009, which was designated as a cash flow hedge of the $12,000,000 construction loan. Effective March 31, 2009, the interest terms in the Companys Credit Agreement related to the $12 million dollar construction loan were amended. The Company calculated its effectiveness test and determined that its interest rate swap was no longer highly effective. As a result, the Company discontinued the use of hedge accounting effective March 31, 2009, and began recording all mark-to-market adjustments within interest expense in the Companys Consolidated Statement of Operations for the quarter ended June 30, 2009. The pre-tax amount previously recognized in Accumulated Other Comprehensive Loss, totaling $145,684 as of March 31, 2009, is being amortized as an increase to interest expense of $1,145 per month, net of tax, over the remaining term of the interest rate swap agreement beginning June 2009. The fair value of the swap as of June 30, 2009 was recorded as an asset of $76,331. The Company recorded a reduction to interest expense for a mark-to-market adjustment of swap fair value of $222,015 for the three months ended June 30, 2009.

Folio 10 /Folio

PAGEBREAK

Table of Contents

xbrl

Line of Credit

At June 30, 2009, the Company had available under the Credit Agreement an $8,000,000 variable rate bank revolving line of credit scheduled to mature on April 30, 2011. The line of credit bears interest at daily LIBOR plus 450 basis points. The line of credit is collateralized by all the Companys assets. At June 30, 2009 and December 31, 2008 there was an outstanding balance of $873,234 and $1,194,000, respectively. The outstanding balance on the line of credit is due April 2011; however the Company anticipates paying it off within the next twelve months and therefore has classified the outstanding balance as a current liability on its Consolidated Balance Sheet.

xbrl,n

7. Income Taxes

xbrl,body

Income tax benefit for the three months ended June 30, 2009 is estimated to be approximately 35% of total earnings before taxes. In the three months ended June 30, 2008, income taxes were estimated to be 32% of total earnings before taxes. The increase in the effective tax rate is primarily due to the Companys losses being related to activities in the United States. The Company incurs a higher effective tax rate in the United States compared to that incurred on operations in Mexico.

The Company follows the provisions of FASB Interpretation No. 48, Accounting for Uncertainty in Income Taxes an interpretation of FASB Statement No. 109 (FIN 48). As of June 30, 2009, the Company has no liability for unrecognized tax positions under FIN 48.

The Company files U.S. federal and state income tax returns as well as income tax returns Mexico. The Company is no longer subject to U.S. federal and state income tax examinations by tax authorities for years before 2005 and is subject to income tax examinations by Mexican authorities since the Company began business in Mexico in 2001. The Company does not anticipate that its unrecognized tax benefits will significantly change within the next twelve months. The Companys 2006 U.S. federal income tax return was previously subject to an audit by the Internal Revenue Service (IRS). The audit was completed in March 2009 with no findings and the Company has received a statement of no change from the IRS. There are currently no income tax audits in process.

xbrl,n

8. Stock Based Compensation

xbrl,body

The Company has a Long Term Equity Incentive Plan (the 2006 Plan), as approved by the Companys stockholders in May 2006. This 2006 Plan replaced the Long Term Equity Incentive Plan (the Original Plan) as originally approved by the stockholders in May 1997 and as amended in May 2000. The 2006 Plan allows for grants to directors and key employees of non-qualified stock options, incentive stock options, stock appreciation rights, restricted stock, performance shares, performance units and other incentive awards (Stock Awards) up to an aggregate of 3,000,000 awards, each representing a right to buy a share of Core Molding Technologies common stock. Stock Awards can be granted under the 2006 Plan through the earlier of December 31, 2015, or the date the maximum number of available awards under the 2006 Plan have been granted.

Stock Options

The following summarizes the activity relating to stock options under the plans mentioned above for the six months ended June 30, 2009:

of		Average
Shares		Exercise Price
Outstanding at December 31, 2008	570,225	$	3.30
Exercised
Granted
Forfeited	(11,400	)	3.21
Outstanding at June 30, 2009	558,825	$	3.30
Exercisable at June 30, 2009	487,115	$	3.29

Folio 11 /Folio

PAGEBREAK

Table of Contents

xbrl

The following summarizes the status of, and changes to, unvested options during the six months ended June 30, 2009:

of		Average
Shares		Exercise Price
Unvested at December 31, 2008	88,830		3.37
Granted
Vested	(17,120	)	3.24
Forfeited
Unvested at June 30, 2009	71,710		3.40

At June 30, 2009 and 2008, there was $100,161 and $208,763, respectively, of total unrecognized compensation expense, related to unvested stock options granted under the plans. Total compensation cost related to incentive stock options for the six months ended June 30, 2009 and 2008 was $45,619 and, $62,771, respectively. This compensation expense is allocated such that $39,438 and $49,238 are included in selling, general and administrative expenses and $6,181 and $13,533 are recorded in cost of sales for the six months ended June 30, 2009 and 2008, respectively.

Restricted Stock

In May of 2006, Core Molding Technologies began granting shares of its common stock to certain directors, officers, and key managers in the form of unvested stock (Restricted Stock). These awards are recorded at the market value of Core Molding Technologies common stock on the date of issuance and amortized ratably as compensation expense over the applicable vesting period.

The following summarizes the status of Restricted Stock grants as of June 30, 2009 and changes during the six months ended June 30, 2009:

Number		Average
of		Grant Date
Shares		Fair Value
Unvested balance at December 31, 2008	85,106	$	7.01
Granted	150,210		2.56
Vested	(28,215	)	5.16
Forfeited
Unvested at June 30, 2009	207,101		4.04

As of June 30, 2009 and 2008, there was $547,341 and $477,398, respectively, of total unrecognized compensation expense related to Restricted Stock granted under the 2006 Plan. The total compensation costs related to restricted stock grants for the six months ended June 30, 2009 and 2008 was $132,575 and $105,491, respectively, all of which was recorded to selling, general and administrative.

xbrl,n

9. Fair Value of Financial Instruments

xbrl,body

The Companys financial instruments consist of long-term debt, interest rate swaps, accounts receivable, and accounts payable. The carrying amount of these financial instruments approximated their fair value.

In September 2006, the FASB issued Statement No. 157 to define fair value, establish a framework for measuring fair value and to expand disclosures about Fair Value Measurements (SFAS No.157). SFAS No. 157 defines fair value, establishes a framework for measuring fair value and expands disclosures about fair value measurements. SFAS No. 157 does not change the requirements to apply fair value in existing accounting standards. Under SFAS No. 157, fair value refers to the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants in the market in which the reporting entity transacts. The standard clarifies that fair value should be based on the assumptions market participants would use when pricing the asset or liability. The Company adopted SFAS 157 on January 1, 2008.

Folio 12 /Folio

PAGEBREAK

Table of Contents

xbrl

To increase consistency and comparability in fair value measurements, SFAS No. 157 establishes a fair value hierarchy that prioritizes the inputs to valuation techniques used to measure fair value into three levels. The level in the fair value hierarchy disclosed is based on the lowest level of input that is significant to the fair value measurement. The three levels of the fair value hierarchy defined by SFAS No. 157 are as follows:

| | Level 1 inputs are quoted prices (unadjusted) in active markets for
identical asset or liabilities that the company has the ability to
access as of the reporting date. |
| --- | --- |
| | Level 2 inputs are inputs other than quoted prices included within
Level 1 that are observable for the asset or liability, either
directly or indirectly through corroboration with observable market
data. |
| | Level 3 inputs are unobservable inputs, such as internally developed
pricing models for the asset or liability due to little or no market
activity for the asset or liability. |

The following table presents financial liabilities measured and recorded at fair value on the Companys Consolidated Balance Sheet on a recurring basis and their level within the fair value hierarchy as of June 30, 2009 and December 31, 2008:

	(Level 1)	(Level 2)	(Level 3)	June 30, 2009
Liabilities
Interest rate swaps	$	$ 219,276	$	$ 219,276
Total	$	$ 219,276	$	$ 219,276
	(Level 1)	(Level 2)	(Level 3)	December 31, 2008
Liabilities
Interest rate swaps	$	$ 502,381	$	$ 502,381
Total	$	$ 502,381	$	$ 502,381

There were no non-recurring fair value measurements for the quarter ended June 30, 2009.

In March 2008, the FASB issued SFAS No. 161 to amend and expand the disclosure requirements of SFAS No. 133 with the intent to provide users of the financial statements with an enhanced understanding of how and why an entity uses derivative instruments, how these derivatives are accounted for and how the respective reporting entitys financial statements are affected. SFAS No. 161 is effective for fiscal years and interim periods beginning after November 15, 2008, and earlier application is encouraged. The Company adopted this standard on January 1, 2009.

Core Molding Technologies derivative instruments located on the Consolidated Balance Sheets (unaudited) were:

		June 30, — 2009		December 31, — 2008
	Balance Sheet Location	Fair Value		Fair Value
Derivatives designated as hedging instruments under SFAS No. 133
Interest rate risk activities	Interest rate swap	$ 295,607		$ 502,381
Derivatives not designated as hedging instruments under SFAS No. 133
Interest rate risk activities	Interest rate swap	$ (76,331	)	$
Total Derivatives		$ 219,276		$ 502,381

Folio 13 /Folio

PAGEBREAK

Table of Contents

xbrl

The effect of derivative instruments on the Consolidated Statement of Operations (unaudited) was:

Derivatives in Cash Flow Hedging Relationships

Derivatives in SFAS No. 133	Amount of (Gain) Loss — Recognized in OCI on				Location of (Gain) Loss — Reclassified from AOCI	Amount of (Gain) Loss — Reclassified from AOCI
Cash Flow Hedging	Derivative				into Income	into Expense
Relationships	(Effective Portion)				(Effective Portion)	(Effective
Portion)
Three months ended	June 30, 2009		June 30, 2008			June 30, 2009	June 30, 2008
Interest rate swaps	$ (67,182	)	$ (127,466	)	Interest expense, net	$ 53,990	$ 33,502
Six months ended	June 30, 2009		June 30, 2008			June 30, 2009	June 30, 2008
Interest rate swaps	$ (61,090	)	$ 19,747		Interest expense, net	$ 109,040	$ 48,131

	Location of (Gain) Loss	Amount of (Gain) Loss Recognized
	Recognized in Income on	in Income of Derivative
Derivatives in SFAS No. 133	Derivative (Ineffective Portion	(Ineffective Portion and Amount
Cash Flow Hedging	and Amount Excluded from	Excluded from Effectiveness
Relationships	Effectivness Testing)	Testing)
Three months ended		June 30, 2009		June 30, 2008
Interest rate swaps	Interest (income) expense	$ (21,293	)	$ (29,650	)
Six months ended		June 30, 2009		June 30, 2008
Interest rate swaps	Interest (income) expense	$ (31,591	)	$ 11,551

Derivatives not designated as hedging instruments under SFAS No. 133

Derivatives Not Designated as — Hedging Instruments	Location of Gain (Loss) — Recognized in Income on	Amount of Realized/Unrealized Gain — (Loss) Recognized in Income on
under SFAS No. 133	Derivatives	Derivatives
Three months ended		June 30, 2009		June 30, 2008
Interest rate swaps	Interest (income) expense	$ (220,871	)	$
Six months ended		June 30, 2009		June 30, 2008
Interest rate swaps	Interest (income) expense	$ (220,871	)	$

Folio 14 /Folio

PAGEBREAK

Table of Contents

xbrl

During first six months of 2009 and 2008, the Company did not reclassify any amounts related to its cash flow hedges from accumulated other comprehensive loss to earnings due to the probability that certain forecasted transactions would not occur. As discussed in Note 6 above, the Company discontinued the use of hedge accounting for one of the interest rate swaps effective March 31, 2009, and began recording all mark-to-market adjustments related to this interest rate swap within interest expense in the Companys Consolidated Statement of Operations. It is anticipated that during the next twelve months the expiration and settlement of cash flow hedge contracts along with the amortization of losses on discontinued hedges will result in income statement recognition of amounts currently classified in accumulated other comprehensive loss of approximately $13,736, net of taxes.

xbrl,n

10. Recent Accounting Pronouncements

xbrl,body

In December 2008, the FASB issued FSP FAS 132(R)-1 to amend SFAS No. 132(R), to provide guidance on an employers disclosures about plan assets of a defined benefit pension or other postretirement plan. FSP FAS 132(R)-1 is effective for fiscal years ending after December 15, 2009 with earlier adoption permitted. The Company is currently reviewing the additional disclosure requirements to determine the impact on the Consolidated Financial Statements and Notes to Consolidated Financial Statements.

In February 2008, the FASB issued FSP FAS 157-2, which delayed the effective date of SFAS No. 157 for all nonrecurring fair value measurements of non-financial assets and liabilities until fiscal years beginning after November 15, 2008. The Company has not recorded any nonrecurring fair value measurements of non-financial assets and liabilities since adopting FSP FAS 157-2 on January 1, 2009.

In April 2009, the FASB issued FSP FAS 157-4 to provide additional guidance for estimating fair value when the volume and level of activity for the asset or liability have significantly decreased. This FSP is effective for interim reporting periods ending after June 15, 2009, with early adoption permitted. The adoption of FSP FAS 157-4 did not have a material impact on the Consolidated Financial Statements.

In May 2009, the FASB issued SFAS No. 165. The standard does not require significant changes regarding recognition or disclosure of subsequent events, but does require disclosure of the date through which subsequent events have been evaluated for purposes of disclosure and accounting recognition. The standard was effective for financial statements issued after June 15, 2009. The adoption of this standard on April 1, 2009 did not have a material impact on the Consolidated Financial Statements. Management has performed an evaluation of subsequent events through August 14, 2009, which is the date the financial statements were issued.

In June 2009, the FASB issued SFAS No. 167 to amend certain requirements of FASB Interpretation No. 46(R), Consolidation of Variable Interest Entities, to improve financial reporting by enterprises involved with variable interest entities and to provide more relevant and reliable information to users of financial statements. This Statement is effective for fiscal years, and interim periods within those fiscal years, beginning on the first fiscal year that begins after November 15, 2009 with early adoption prohibited. The Company is currently reviewing the additional requirements to determine the impact on the Consolidated Financial Statements and Notes to Consolidated Financial Statements.

In June 2009, the FASB issued SFAS No. 168 to address the new authoritative U.S. generally accepted accounting principles recognized by the FASB to be applied by nongovernmental entities. Rules and interpretive releases of the SEC under authority of federal securities laws are also sources of authoritative GAAP for SEC registrants. On the effective date of this Statement, the Codification will supersede all then-existing non-SEC accounting and reporting standards. All other non-grandfathered non-SEC accounting literature not included in the Codification will become non-authoritative. Following this Statement, the FASB will not issue new standards in the form of Statements, FASB Staff Positions, or Emerging Issues Task Force Abstracts; rather, it will issue Accounting Standards Updates. This Statement is effective for financial statements issued for interim and annual periods ending after September 15, 2009. This Statement does not change GAAP and will not have a material impact on the Company.

/xbrl,ns

Folio 15 /Folio

PAGEBREAK

Table of Contents

Part I Financial Information

Item 2

Managements Discussion and Analysis of Financial Condition and Results of Operations

This Managements Discussion and Analysis of Financial Condition and Results of Operations contains forward-looking statements within the meaning of the federal securities laws. As a general matter, forward-looking statements are those focused upon future plans, objectives or performance as opposed to historical items and include statements of anticipated events or trends and expectations and beliefs relating to matters not historical in nature. Such forward-looking statements involve known and unknown risks and are subject to uncertainties and factors relating to Core Molding Technologies operations and business environment, all of which are difficult to predict and many of which are beyond Core Molding Technologies control. These uncertainties and factors could cause Core Molding Technologies actual results to differ materially from those matters expressed in or implied by such forward-looking statements.

Core Molding Technologies believes that the following factors, among others, could affect its future performance and cause actual results to differ materially from those expressed or implied by forward-looking statements made in this report: business conditions in the plastics, transportation, watercraft and commercial product industries; federal and state regulations (including engine emission regulations); general economic conditions in the countries in which Core Molding Technologies operates; dependence upon two major customers as the primary source of Core Molding Technologies sales revenues; recent efforts of Core Molding Technologies to expand its customer base; failure of Core Molding Technologies suppliers to perform their contractual obligations; the availability of raw materials; inflationary pressures; new technologies; competitive and regulatory matters; labor relations; the loss or inability of Core Molding Technologies to attract and retain key personnel; changes to federal, state and local environmental laws and regulations; the availability of capital; the ability of Core Molding Technologies to provide on-time delivery to customers, which may require additional shipping expenses to ensure on-time delivery or otherwise result in late fees; risk of cancellation or rescheduling of orders; inefficiencies related to the transfer and start up of Core Molding Technologies new Matamoros production facility; managements decision to pursue new products or businesses which involve additional costs, risks or capital expenditures; and other risks identified from time-to-time in Core Molding Technologies other public documents on file with the Securities and Exchange Commission, including those described in Item 1A of the 2008 Annual Report to Shareholders on Form 10-K.

Overview

Core Molding Technologies is a compounder of sheet molding composite (SMC) and molder of fiberglass reinforced plastics. Core Molding Technologies produces high quality fiberglass reinforced molded products and SMC materials for varied markets, including light, medium, and heavy-duty trucks, automobiles and automotive aftermarkets, personal watercraft, and other commercial products. The demand for Core Molding Technologies products is affected by economic conditions in the United States, Canada and Mexico, the cyclicality of markets we serve, regulatory requirements, interest rates and other factors. Core Molding Technologies manufacturing operations have a significant fixed cost component. Accordingly, during periods of changing demands, the profitability of Core Molding Technologies operations may change proportionately more than revenues from operations.

On December 31, 1996, Core Molding Technologies acquired substantially all of the assets and assumed certain liabilities of Columbus Plastics, a wholly owned operating unit of Navistars truck manufacturing division since its formation in late 1980. Columbus Plastics, located in Columbus, Ohio, was a compounder and compression molder of SMC. In 1998 Core Molding Technologies began compression molding operations at its second facility in Gaffney, South Carolina, and in October 2001, Core Molding Technologies acquired certain assets of Airshield Corporation. As a result of this acquisition, Core Molding Technologies expanded its fiberglass molding capabilities to include the spray up, hand-lay-up open mold processes and resin transfer (RTM) closed mold process. In September 2004, Core Molding Technologies acquired substantially all the operating assets of Keystone Restyling Products, Inc., a privately held manufacturer and distributor of fiberglass reinforced products for the automotive-aftermarket industry. In August 2005, Core Molding Technologies acquired certain assets of the Cincinnati Fiberglass Division of Diversified Glass, Inc. a Batavia, Ohio-based, privately held manufacturer and distributor of fiberglass reinforced plastic components supplied primarily to the heavy-duty truck market. The Batavia, Ohio facility produces reinforced plastic products by a robotic spray-up open mold process and resin transfer molding (RTM) utilizing multiple insert tooling (MIT) closed mold process. In August of 2008, the Company entered into a construction agreement to begin building a new 437,000 square foot production facility in Matamoros, Mexico that has replaced its old leased facility. Full occupancy of the new facility began on June 1, 2009.

Folio 16 /Folio

PAGEBREAK

Table of Contents

Core Molding Technologies recorded a net loss for the six months ended June 30, 2009 of $1,527,000 or $0.23 per basic and diluted share, compared with a net income of $2,580,000, or $0.38 per basic and $0.37 per diluted share, for the six months ended June 30, 2008. During the six months ended June 30, 2009, the Company has recorded approximately $1,983,000 of expense for transfer and start-up costs associated with the construction of the Companys new production facility in Mexico. The Company has also experienced a 38% decrease in product sales in the first six months of 2009 as compared to the same period in 2008. While industry analysts are forecasting an increase in truck orders for the second half of 2009, the Company recognizes that this expectation should be considered in light of the uncertain economy.

Results of Operations

Three Months Ended June 30, 2009, As Compared To Three Months Ended June 30, 2008

Net sales for the three months ended June 30, 2009, totaled $17,300,000, representing an approximate 42% decrease from the $29,939,000 reported for the three months ended June 30, 2008. Included in total sales were tooling project sales of $656,000 and $543,000 for the three months ended June 30, 2009 and June 30, 2008, respectively. Tooling project sales result from billings to customers for molds and assembly equipment built specifically for their products. These sales are sporadic in nature. Total product sales, excluding tooling project sales, were approximately 43% lower for the three months ended June 30, 2009, as compared to the same period a year ago. The primary reason for the decrease in product sales was the continued downturn in the North American medium and heavy-duty truck market caused by the overall economic conditions that currently exist.

Sales to Navistar totaled $9,152,000 for the three months ended June 30, 2009, decreasing 45% from $16,661,000 in sales for the three months ended June 30, 2008. Included in total sales was $172,000 of tooling sales for the three months ended June 30, 2009 compared to $37,000 for the same three months in 2008. Product sales to Navistar decreased by 46% for the three months ended June 30, 2009 versus the same period of the prior year. The primary reasons for the decrease in product sales were the continued downturn in the North American medium and heavy-duty truck market, the overall economic conditions as noted above, and lower orders for Navistars military product line.

Sales to PACCAR totaled $5,678,000 for the three months ended June 30, 2009, decreasing 29% from $8,034,000 in sales for the three months ended June 30, 2008. Included in total sales was $195,000 of tooling sales for the three months ended June 30, 2009 compared to $366,000 for the same three months in 2008. Product sales to PACCAR decreased by 29% for the three months ended June 30, 2009 compared to the same period of the prior year. The decrease in total product sales was primarily due to market conditions as noted above.

Sales to other customers for the three months ended June 30, 2009 decreased 53% to $2,470,000 compared to $5,243,000 for the three months ended June 30, 2008. This decrease was primarily due to market related decreases in product sales to other North American medium and heavy-duty truck manufacturers amounting to approximately $1,870,000, as well as a decrease in product sales to a customer in the marine industry of approximately $676,000.

Gross margin was approximately 6% of sales for the three months ended June 30, 2009, compared with 19% for the three months ended June 30, 2008. The decrease in gross margin was primarily due to lower overhead cost absorption due to lower product sales volumes. Our manufacturing operations have significant overhead costs such as certain labor, energy, depreciation, lease expense and certain benefit costs including, post retirement healthcare costs that do not change proportionately with sales. Also impacting gross margin was approximately $681,000 of transition and start up costs incurred during the three months ended June 30, 2009 associated with the Companys new production facility in Matamoros Mexico.

Selling, general and administrative expenses (SG&A) totaled $2,256,000 for the three months ended June 30, 2009, decreasing from $2,994,000 for the three months ended June 30, 2008. The primary reasons for the decrease was no profit sharing expense for the three months ended June 30, 2009, along with lower labor and benefit costs and lower professional fees. Partially offsetting these reductions was approximately $87,000 of transition and start-up costs incurred during the quarter associated with the Companys new production facility in Mexico.

Net interest expense decreased to $30,000 for the three months ended June 30, 2009, as compared to net interest expense of $132,000 for the three months ended June 30, 2008. Included in net interest expense for the three months ended June 30, 2009 is $242,000 of interest income from ineffectiveness related to the Companys interest rate swaps as compared to $30,000 of interest income recorded for the same period ended June 30, 2008. Additionally the Company capitalized interest of approximately $109,000 during the quarter related to its new production facility in Mexico which was placed into service in June 2009. These credits were partially offset by interest expense related to the additional borrowings under the Credit Agreement related to the Companys new production facility.

Folio 17 /Folio

PAGEBREAK

Table of Contents

Income tax benefit for the three months ended June 30, 2009, is estimated to be approximately 33% of total earnings before taxes. In the three months ended June 30, 2008 income taxes were estimated to be 31% of total earnings before taxes. The increase in the effective rate is primarily due to the quarters operating loss being related to activities in the United States. The Company incurs a higher effective tax rate in the United States compared to that incurred on operations in Mexico.

Core Molding Technologies recorded net loss for the three months ended June 30, 2009 of $867,000 or $0.13 per basic and diluted share, compared with net income of $1,716,000, or $0.25 per basic and $0.24 per diluted share, for the three months ended June 30, 2008.

Six Months Ended June 30, 2009, As Compared To Six Months Ended June 30, 2008

Net sales for the six months ended June 30, 2009, totaled $35,684,000, representing an approximate 40% decrease from the $59,024,000 reported for the six months ended June 30, 2008. Included in total sales were tooling project sales of $1,210,000 and $3,646,000 for the six months ended June 30, 2009 and June 30, 2008, respectively. Tooling project sales result from billings to customers for molds and assembly equipment built specifically for their products. These sales are sporadic in nature. Total product sales, excluding tooling project sales, decreased by 38% to $34,474,000 for the six months ended June 30, 2009 as compared to $55,378,000 for the six months ended June 30, 2008. The primary reason for the decrease in product sales was the continued downturn in the North American medium and heavy-duty truck market caused by the overall economic conditions.

Sales to Navistar totaled $19,512,000 for the six months ended June 30, 2009, as compared to $32,893,000 for the six months ended June 30, 2008. Included in total sales was $475,000 of tooling sales for the six months ended June 30, 2009 compared to $2,793,000 for the six months ended June 30, 2008. Total product sales to Navistar decreased by 37% for the six months ended June 30, 2009 compared to the six months ended June 30, 2008. The primary reason for the decrease in product sales were the market conditions noted above.

Sales to PACCAR totaled $9,881,000 for the six months ended June 30, 2009, as compared to $15,534,000 reported for the six months ended June 30, 2008. Included in total sales was $207,000 of tooling sales for the six months ended June 30, 2009 compared to $460,000 for the six months ended June 30, 2008. Total product sales to PACCAR decreased by 36% for the six months ended June 30, 2009 compared to the six months ended June 30, 2008. The decrease in total product sales was also due to the above noted market conditions.

Sales to other customers for the six months ended June 30, 2009, decreased approximately 41% to $6,291,000 from $10,597,000 for the six months ended June 30, 2008. This decrease is primarily due to market related decreases in product sales to other North American medium and heavy-duty truck manufacturers of $3,297,000 and decreases in product sales to a customer in the marine industry of approximately $927,000.

Gross margin was approximately 7% of sales for the six months ended June 30, 2009, compared with 17% for the six months ended June 30, 2008. The decrease in gross margin was primarily due to higher overhead cost absorption due to lower product sales volumes. Our manufacturing operations have significant overhead costs such as certain labor, energy, depreciation, lease expense and certain benefit costs including, post retirement healthcare costs that do not change proportionately with sales. Also contributing to the decrease in gross margin was approximately $1,752,000 of transition costs and start up expenses associated with the Companys new production facility.

Selling, general and administrative expenses (SG&A) decreased to $4,756,000 for the six months ended June 30, 2009, decreasing from $5,808,000 for the six months ended June 30, 2008. The primary reason for the decrease was no profit sharing accrued for the six months ended June 30, 2009. Additionally, there were lower labor and benefit costs and lower professional fees as compared to the period ended June 30, 2008. Partially offsetting these reductions was approximately $231,000 of transition and start-up costs incurred in 2009 associated with the Companys new production facility in Mexico.

Folio 18 /Folio

PAGEBREAK

Table of Contents

Net interest expense totaled $140,000 for the six months ended June 30, 2009, as compared to net interest expense of $361,000 for the six months ended June 30, 2008. Included in net interest expense for the six months ended June 30, 2009 is a credit for $252,000 from ineffectiveness related to the Companys interest rate swaps as compared to $12,000 of interest expense recorded for the same period ending June 30, 2008. Additionally the Company capitalized interest of approximately $167,000 in 2009 related to its new production facility in Mexico which was placed into service in June 2009. These credits were partially offset by interest expense related to the additional borrowings on the two new loans related to the Companys southwest facility.

Income tax benefit for the six months ended June 30, 2009, is estimated to be approximately 35% of total earnings before taxes. In the six months ended June 30, 2008 income taxes were estimated to be 32% of total earnings before taxes. The increase in the effective tax rate is primarily due to the quarters operating loss being related to activities in the United States. The Company incurs a higher effective tax rate in the United States compared to that incurred on operations in Mexico.

Core Molding Technologies recorded net loss for the six months ended June 30, 2009 of $1,527,000 or $0.23 per basic and diluted share, compared with net income of $2,580,000, or $0.38 per basic and $0.37 per diluted share, for the six months ended June 30, 2008.

Liquidity and Capital Resources

The Companys primary sources of funds have been cash generated from operating activities and borrowings from third parties. Primary cash requirements are for operating expenses and capital expenditures.

As widely reported, financial markets in the United States, Europe and Asia continue to experience disruption in their financial markets, including, among other things, extreme volatility in security prices, severely diminished liquidity and credit availability, rating downgrades of certain investments and declining valuations of others. Governments have taken unprecedented actions intended to address extreme market conditions that include severely restricted credit and declines in real estate values. While currently these conditions have not impaired the Companys ability to access credit markets and finance operations, there can be no assurance that there will not be a further deterioration in financial markets and confidence in major economies, which may impact the Companys ability to borrow in the future.

Cash provided by operating activities for the six months ended June 30, 2009 totaled $2,460,000. Net operating losses of $1,527,000 negatively impacted operating cash flows. Non-cash deductions of depreciation and amortization contributed $1,849,000 to operating cash flow. In addition, the increase in the postretirement healthcare benefits liability of $476,000 is not a current cash obligation, and this item will not be a cash obligation until additional employees retire and begin to utilize these benefits. Changes in working capital increased cash provided by operating activities by $1,757,000. Changes in working capital primarily relate to a decrease in accounts receivable due to decreased product sales for the six months ended June 30, 2009 compared to the fourth quarter of 2008 as well as lower inventory levels. These were offset by lower accounts payable and accrued balances as of June 30, 2009 as compared to December 31, 2008 which was also due to lower volumes.

Cash used in investing activities for the six months ended June 30, 2009 was $8,703,000, primarily representing purchases related to the construction of the Companys new production facility in Mexico. The Company currently plans an additional $1,531,000 of capital expenditures for the remainder of the year, of which $1,071,000 relates to the completion of the Companys new production facility in Mexico. These capital additions will be funded by cash from operations and borrowings from the Companys available construction loan line of credit. The Company may also undertake other capital improvement projects in the future as deemed necessary and appropriate.

Financing activities increased cash by $6,243,000. This increase is related to borrowings on the Companys construction loans of $7,879,000. This amount is partially offset by net repayments on the line of credit of $321,000, and other loan payments of $1,091,000.

At June 30, 2009, the Company had no cash on hand and a line of credit of $8,000,000, with a scheduled maturity of April 30, 2011. At June 30, 2009, Core Molding Technologies had outstanding borrowings of $873,000 on this line of credit.

The Company is required to meet certain financial covenants included in the Credit Agreement with respect to leverage ratios, fixed charge ratios, capital expenditures as well as other customary affirmative and negative covenants. As of June 30, 2009, the Company was in compliance with its financial debt covenants associated with the loans made under the Credit Agreement as described above, as well as financial covenants contained in certain equipment leases.

Folio 19 /Folio

PAGEBREAK

Table of Contents

On March 31, 2009, the Company entered into the First Amendment to the Credit Agreement with KeyBank. Pursuant to the terms of the First Amendment, the lender agreed to modify certain terms of the Credit Agreement. These modifications included (1) modification of the definition of EBITDA to add back transition costs up to $3,200,000 associated with the transition and startup of the new production facility in Matamoros and add back non-cash compensation expense recorded under SFAS 123R (2) modification of the fixed charge definition to exclude from consolidated interest expense any measure of ineffectiveness from interest rate swaps and amortization of loan origination and issuance costs (3) modification of the leverage ratio from 3.0x to 3.2x at June 30, 2009, 3.4x at September 30, 2009, and 3.2x at December 31, 2009 (4) increase the applicable margin for interest rates applicable to LIBOR loans effective March 31, 2009 to 400 basis points for both construction loans and the revolving line of credit; all rates decrease 25 basis points upon reaching a leverage ratio of less than 2.25 to 1.00 (5) increase the letter of credit fee on the Industrial Revenue Bond to 300 basis points (6) increase the 1% Libor floor on the $8,000,000 construction loan and revolving line of credit to 1.5% and (7) implement a 1.5% Libor floor on the $12,000,000 construction loan.

On June 30, 2009, the Company entered into a Second Amendment to the Credit Agreement, dated as of December 9, 2008, with KeyBank. Pursuant to the terms of the Second Amendment, the parties agreed to modify certain terms of the Credit Agreement. These modifications included (1) an increase in the applicable margin for interest rates applicable to LIBOR loans to 450 basis points, effective June 30, 2009, for both construction loans and the revolving line of credit; with all rates other than rates applicable to the term loan decreasing by 25 basis points upon reaching a leverage ratio of less than 2.25 to 1.00, (2) a decrease in the applicable margin for the interest rate applicable to the term loan to 200 basis points in excess of the LIBOR or the Base Rate, (3) a change in the definition of consolidated EBITDA to add back non-cash post-retirement expenses minus retirement benefits paid in cash, (4) the deletion of the 150 basis point interest rate floor from the LIBOR rates applicable to the $8,000,000 and $12,000,000 construction loans and the revolving line of credit, and (5) the extension of the commitment for the revolving line of credit to April 30, 2011.

Based on the Companys forecasts which are primarily based on industry analysts estimates of 2009 heavy and medium-duty truck production volumes as well as other assumptions management believes to be reasonable, management believes that the Company will be able to maintain compliance with the covenants as amended under the First Amendment and the Second Amendment to the Credit Agreement for the next 12 months. Management believes that cash flow from operating activities together with available borrowings under the Credit Agreement will be sufficient to meet Core Molding Technologies liquidity needs. However, if a material adverse change in the financial position of Core Molding Technologies should occur, or if actual sales or expenses are substantially different than what has been forecasted, Core Molding Technologies liquidity and ability to obtain further financing to fund future operating and capital requirements could be negatively impacted.

Recent Accounting Pronouncements

Folio 20 /Folio

PAGEBREAK

Table of Contents

Critical Accounting Policies and Estimates

Managements Discussion and Analysis of Financial Condition and Results of Operations discuss the Companys consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these consolidated financial statements requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period. On an on-going basis, management evaluates its estimates and judgments, including those related to accounts receivable, inventories, post retirement benefits, and income taxes. Management bases its estimates and judgments on historical experience and on various other factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

Management believes the following critical accounting policies, among others, affect its more significant judgments and estimates used in the preparation of its consolidated financial statements.

Accounts receivable allowances: Management maintains allowances for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments. If the financial condition of the Companys customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required. The Company recorded an allowance for doubtful accounts of $121,000 at June 30, 2009 and $109,000 at December 31, 2008. Management also records estimates for customer returns and deductions, discounts offered to customers, and for price adjustments. Should customer returns and deductions, discounts, and price adjustments fluctuate from the estimated amounts, additional allowances may be required. The Company has reduced accounts receivable for chargebacks by $727,000 at June 30, 2009 and $740,000 at December 31, 2008.

Inventories: Inventories, which include material, labor and manufacturing overhead, are valued at the lower of cost or market. The inventories are accounted for using the first-in, first-out (FIFO) method of determining inventory costs. Inventory quantities on-hand are regularly reviewed, and where necessary, provisions for excess and obsolete inventory are recorded based on historical and anticipated usage.

Goodwill and Long-Lived Assets: Management evaluates whether impairment exists for goodwill and long-lived assets annually on December 31 or at interim periods if an indicator of impairment exists. Should actual results differ from the assumptions used to determine impairment, additional provisions may be required. If there is a sustained downturn in the economy or the disruption of the financial and credit markets continues, demand for our products could fall below our current expectations and our forecasts of revenues and operating results could decline. Impairment charges of our goodwill or long-lived assets may be required in the future if our expected future cash flows decline. The Company has not recorded any impairment to goodwill or long-lived assets for the six months ended June 30, 2009 or the year ended December 31, 2008.

Self-Insurance: The Company is self-insured with respect to most of its Columbus and Batavia, Ohio and Gaffney, South Carolina medical and dental claims and Columbus and Batavia, Ohio workers compensation claims. The Company has recorded an estimated liability for self-insured medical and dental claims incurred but not reported and workers compensation claims incurred but not reported at June 30, 2009 and December 31, 2008 of $1,114,000 and $1,109,000, respectively.

Folio 21 /Folio

PAGEBREAK

Table of Contents

Postretirement benefits: Management records an accrual for postretirement costs associated with the health care plan sponsored by Core Molding Technologies. Should actual results differ from the assumptions used to determine the reserves, additional provisions may be required. In particular, increases in future healthcare costs above the assumptions could have an adverse effect on Core Molding Technologies operations. The effect of a change in healthcare costs is described in Note 10 of the Consolidated Notes to Financial Statements, which are contained in the 2008 Annual Report to Shareholders. Core Molding Technologies recorded a liability for postretirement healthcare benefits based on actuarially computed estimates of $16,354,000 at June 30, 2009 and $15,878,000 at December 31, 2008.

Revenue Recognition: Revenue from product sales is recognized at the time products are shipped and title transfers. Allowances for returned products and other credits are estimated and recorded as revenue is recognized. Tooling revenue is recognized when the customer approves the tool and accepts ownership. Progress billings and expenses are shown net as an asset or liability on the Companys balance sheet. Tooling in progress can fluctuate significantly from period to period and is dependent upon the stage of tooling projects and the related billing and expense payment timetable for individual projects and therefore does not necessarily reflect projected income or loss from tooling projects. At June 30, 2009 the Company has recorded a net liability related to tooling in progress of $898,000, which represents approximately $4,865,000 of progress tooling billings and $3,967,000 of progress tooling expenses. At December 31, 2008 the Company had recorded a net liability related to tooling in progress of $212,000, which represents approximately $3,555,000 of progress tooling billings and $3,343,000 of progress tooling expenses.

Income taxes: The Consolidated Balance Sheet at June 30, 2009 and December 31, 2008, includes a deferred tax asset of $7,177,000 and $7,188,000, respectively. The Company performs analyses to evaluate the balance of deferred tax assets that will be realized. Such analyses are based on the premise that the Company is, and will continue to be, a going concern and that it is more likely than not that deferred tax benefits will be realized through the generation of future taxable income. For more information, refer to Note 9 in Core Molding Technologies 2008 Annual Report to Shareholders.

Folio 22 /Folio

PAGEBREAK

Table of Contents

Part I Financial Information

Item 4T

Controls and Procedures

As of the end of the period covered by this report, the Company has carried out an evaluation, under the supervision and with the participation of its management, including its Chief Executive Officer and its Chief Financial Officer, of the effectiveness of the design and operation of its disclosure controls and procedures (as defined in Rule 13a-15(e) of the Exchange Act). Based upon this evaluation, the Companys management, including its Chief Executive Officer and its Chief Financial Officer, concluded that the Companys disclosure controls and procedures were (i) effective to ensure that information required to be disclosed in the Companys reports filed or submitted under the Exchange Act was accumulated and communicated to the Companys management, including its Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure, and (ii) effective to ensure that information required to be disclosed in the Companys reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commissions rules and forms.

There were no changes in internal control over financial reporting (as such term is defined in Exchange Act Rule 13a-15(f)) that occurred in the last fiscal quarter that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Folio 23 /Folio

PAGEBREAK

Table of Contents

Part II Other Information

ITEM 1. Legal Proceedings

None

Item 1A. Risk Factors

There have been no material changes in Core Molding Technologies risk factors from those previously disclosed in Core Molding Technologies 2008 Annual Report on Form 10-K.

ITEM 2. Unregistered Sales of Equity Securities and Use of Proceeds

None

ITEM 3. Defaults Upon Senior Securities

None

ITEM 4. Submission of Matters to a Vote of Security Holders

At the annual meeting of the stockholders of Core Molding Technologies held on May 28, 2009, the following issue was voted upon with the indicated results:

A. Election of Directors: — Kevin L. Barnett	5,163,731	1,054,626
Thomas R. Cellitti	5,148,846	1,069,511
James F. Crowley	6,162,038	56,319
Ralph O. Hellmold	6,138,379	79,978
Malcolm M. Prine	6,162,987	55,370

The above elected directors constitute the full acting Board of Directors for Core Molding Technologies; all terms expire at the 2010 annual meeting of stockholders of the Company.

ITEM 5. Other Information

None

ITEM 6. Exhibits

See Index to Exhibits

Folio 24 /Folio

PAGEBREAK

Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

Date: August 14, 2009	CORE MOLDING TECHNOLOGIES, INC. — By:	/s/ Kevin L. Barnett
		Kevin L. Barnett
		President, Chief Executive Officer, and
Director
Date: August 14, 2009	By:	/s/ Herman F. Dick, Jr.
		Herman F. Dick, Jr.
		Vice President, Secretary, Treasurer and Chief Financial Officer

Folio 25 /Folio

PAGEBREAK

Table of Contents

INDEX TO EXHIBITS

Exhibit No.		Description
2	(a)(1)	Asset Purchase Agreement
Dated as of September 12, 1996,
As amended October 31, 1996,
between Navistar and RYMAC Mortgage
Investment Corporation 1	Incorporated by
reference to
Exhibit 2-A to
Registration
Statement on Form
S-4 (Registration
No. 333-15809)
2	(a)(2)	Second Amendment to Asset Purchase
Agreement dated December 16, 1996 1	Incorporated by
reference to
Exhibit 2(a)(2) to
Annual Report on
Form 10-K for the
year-ended December
31, 2001
2	(b)(1)	Agreement and Plan of Merger dated as of
November 1, 1996, between Core Molding
Technologies, Inc. and RYMAC Mortgage
Investment Corporation	Incorporated by
reference to
Exhibit 2-B to
Registration
Statement on Form
S-4 (Registration
No. 333-15809)
2	(b)(2)	First Amendment to Agreement and Plan
of Merger dated as of December 27, 1996
Between Core Molding Technologies, Inc. and
RYMAC Mortgage Investment Corporation	Incorporated by
reference to
Exhibit 2(b)(2) to
Annual Report on
Form 10-K for the
year ended December
31, 2002
2	(c)	Asset Purchase Agreement dated as of October
10, 2001, between Core Molding Technologies,
Inc. and Airshield Corporation	Incorporated by
reference to
Exhibit 1 to Form
8-K filed October
31, 2001
3	(a)(1)	Certificate of Incorporation of
Core Molding Technologies, Inc.
as filed with the Secretary of State
of Delaware on October 8, 1996	Incorporated by
reference to
Exhibit 4(a) to
Registration
Statement on Form
S-8 (Registration
No. 333-29203)
3	(a)(2)	Certificate of Amendment of
Certificate of Incorporation
of Core Molding Technologies, Inc.
as filed with the Secretary of State
of Delaware on November 6, 1996	Incorporated by
reference to
Exhibit 4(b) to
Registration
Statement on Form
S-8 (Registration
No. 333-29203)
3	(a)(3)	Certificate of Amendment of Certificate of
Incorporation as filed with the Secretary of
State of Delaware on August 28, 2002	Incorporated by
reference to
Exhibit 3(a)(4) to
Quarterly Report on
Form 10-Q for the
quarter ended
September 30, 2002
3	(a)(4)	Certificate of Designation, Preferences and
Rights of Series A Junior Participating
Preferred Stock as filed with the Secretary
of State of Delaware on July 18, 2007	Incorporated by
reference to
Exhibit 3.1 to Form 8-K filed July 19,
2007
3	(b)	Amended and Restated By-Laws of Core Molding
Technologies, Inc.	Incorporated by
reference to
Exhibit 3.1 to
Current Report on
Form 8-K filed
January 4, 2008

Folio 26 /Folio

PAGEBREAK

Table of Contents

Exhibit No.		Description	Location
4	(a)(1)	Certificate of Incorporation of Core
Molding Technologies, Inc. as filed with
the Secretary of State of Delaware on
October 8, 1996	Incorporated by
reference to
Exhibit 4(a) to
Registration
Statement on Form
S-8 (Registration
No. 333-29203)
4	(a)(2)	Certificate of Amendment of Certificate
of Incorporation of Core Materials
Corporation as filed with the Secretary of
State of Delaware on November 6, 1996	Incorporated by
reference to
Exhibit 4(b) to
Registration
Statement on Form
S-8 (Registration
No. 333-29203)
4	(a)(3)	Certificate of Amendment of Certificate
of Incorporation as filed with the
Secretary of State of Delaware on August
28, 2002	Incorporated by
reference to
Exhibit 3(a)(4) to
Quarterly Report on
Form 10-Q for the
quarter ended
September 30, 2002
4	(a)(4)	Certificate of Designation, Preferences
and Rights of Series A Junior
Participating Preferred Stock as filed
with the Secretary of State of Delaware
on July 18, 2007	Incorporated by
reference to
Exhibit 3.1 to Form 8-K filed July 19,
2007
4	(b)	Stockholder Rights Agreement dated as of
July 18, 2007, between Core Molding
Technologies, Inc. and American Stock
Transfer & Trust Company	Incorporated by
reference to
Exhibit 4.1 to
Current Report From 8-K filed July 19,
2007
10	(a)	Second Amendment Agreement, dated June
30, 2009, to the Credit Agreement dated
December 9, 2009, among Core Molding
Technologies, Inc., Core Composites de
Mexico, S. De R.L. de C.V. and Keybank
National Association.	Incorporated by
reference to
Exhibit 10.1 to
Current Report From
8-K filed July 2,
2009
11		Computation of Net Income per Share	Exhibit 11 omitted
because the
required
information is
Included in Notes
to Financial
Statement
31	(a)	Section 302 Certification by Kevin L.
Barnett, President, Chief Executive
Officer, and Director	Filed Herein
31	(b)	Section 302 Certification by Herman F.
Dick, Jr., Vice President, Secretary,
Treasurer, and Chief Financial Officer	Filed Herein
32	(a)	Certification of Kevin L. Barnett, Chief
Executive Officer of Core Molding
Technologies, Inc., dated August 14,
2009, pursuant to 18 U.S.C. Section 1350	Filed Herein
32	(b)	Certification of Herman F. Dick, Jr.,
Chief Financial Officer of Core Molding
Technologies, Inc., dated August 14,
2009, pursuant to 18 U.S.C. Section 1350	Filed Herein

1 The Asset Purchase Agreement, as filed with the Securities and Exchange Commission at Exhibit 2-A to Registration Statement on Form S-4 (Registration No. 333-15809), omits the exhibits (including, the Buyer Note, Special Warranty Deed, Supply Agreement, Registration Rights Agreement and Transition Services Agreement, identified in the Asset Purchase Agreement) and schedules (including, those identified in Sections 1, 3, 4, 5, 6, 8 and 30 of the Asset Purchase Agreement. Core Molding Technologies, Inc. will provide any omitted exhibit or schedule to the Securities and Exchange Commission upon request.

Folio 27 /Folio

AI assistant

CORE MOLDING TECHNOLOGIES INC Interim / Quarterly Report 2009

33766_10-q_2009-08-14_6c5ce10d-dbfc-4a21-bade-bf1d5a26de8d.zip

AI assistant

CORE MOLDING TECHNOLOGIES INC — Interim / Quarterly Report 2009

33766_10-q_2009-08-14_6c5ce10d-dbfc-4a21-bade-bf1d5a26de8d.zip

More from CORE MOLDING TECHNOLOGIES INC

CORE MOLDING TECHNOLOGIES INC Interim / Quarterly Report 2009