CHALICE MINING LIMITED — Capital/Financing Update 2021

Dec 1, 2021

ASX Announcement

2 December 2021

New mineralised intrusion discovered at Julimar

New zone of shallow high-grade mineralisation intersected directly south of the ~6.5km long Hartog airborne EM anomaly, outside of the Gonneville Intrusion

==> picture [493 x 25] intentionally omitted <==

----- Start of picture text -----

[Highlights ]
----- End of picture text -----

• « New shallow high-grade PGE-Ni-Cu-Co sulphide discovery made on Chalice-owned farmland within the 100%-owned Julimar Project, ~70km NE of Perth, WA:

• « High-grade (>0.6% NiEq) sulphide mineralisation intersected in a newly identified ultramafic intrusive unit to the west of Gonneville (separated by ~70m of metasediments):

  • « 3m @ 2.0g/t Pd , 0.3g/t Pt, 0.6% Ni, 0.5% Cu, 0.05% Co ( ~1.7% NiEq[1] ) from 68m (JRC392);

  • « 2m @ 1.8g/t Pd , 0.2g/t Pt, 0.6% Ni, 0.5% Cu, 0.06% Co ( ~1.9% NiEq ) from 139.2m (JD211);

• « New zone has no EM response but is located immediately south of the ~6.5km long Hartog Airborne EM (AEM) anomaly – further upgrading the prospectivity of that target and again highlighting the potential for further ‘blind’ discoveries .

• « New zone already visually identified in holes drilled down-dip and along strike to the south (assays pending).

• « Ongoing step-out drilling outside the Gonneville Resource has extended multiple high-grade (>0.6% NiEq) zones, including:

• « 23.3m @ 2.8g/t Pd, 0.7g/t Pt, 1.0g/t Au , 0.2% Ni, 1.5% Cu , 0.02% Co (~ 2.7% NiEq ) from 582m (JD142);

• « 7.1m @ 2.3g/t Pd, 0.9g/t Pt, 0.3% Ni, 0.9% Cu , 0.02% Co (~ 2.0% NiEq ) from 513m (JD157);

• « 4.4m @ 4.5g/t Pd, 2.2g/t Pt, 0.6% Ni, 0.2% Cu, 0.03% Co (~ 3.0% NiEq ) from 523m (JD157);

• « 8.2m @ 2.2g/t Pd, 1.1g/t Pt, 1.1g/t Au, 0.1% Ni, 0.1% Cu, 0.01% Co (~ 1.6% NiEq ) from 455m (JD162); and,

• « 5.0m @ 3.3g/t Pd, 0.8g/t Pt, 0.2g/t Au, 0.3% Ni, 0.7% Cu, 0.02% Co (~ 2.2% NiEq ) from 157m (JD167).

• «

• Step-out drilling is continuing on farmland, focused on extending the high-grade Resource .

• « 40m spaced infill drilling within the shallow (<250m deep) Inferred part of the Gonneville Resource continues to deliver results in line with the Resource model (refer to Appendix).

• « Conservation Management Plan (CMP) for initial drilling at the Hartog-Baudin targets is finalised and under consideration by the WA State Government – approval expected shortly .

• « The Scoping Study for an initial mine development at Gonneville is progressing on schedule .

1 Nickel Equivalent (%) = Ni (%) + 0.37xPd (g/t) + 0.24xPt (g/t) + 0.25xAu (g/t) + 0.65xCu (%) + 3.24xCo (%)

Registered Office ABN 47 116 648 956

==> picture [10 x 9] intentionally omitted <==

==> picture [13 x 12] intentionally omitted <==

Level 3, 46 Colin Street West Perth, Western Australia PO Box 428, West Perth 6005

info@chalicemining.com www.chalicemining.com

@chalicemining chalice-mining

T: +61 8 9322 3960

Overview

Chalice Mining Limited (“Chalice” or “the Company”, ASX: CHN | OTCQB: CGMLF) is pleased to report a significant new discovery at its 100%-owned Julimar Nickel-Copper-Platinum Group Element (PGE) Project , located ~70km north-east of Perth in Western Australia.

Step-out drilling at the north-western limit of the Gonneville deposit has intersected a new shallow zone of high-grade sulphide mineralisation. The mineralisation occurs within a newly identified narrow ultramafic unit located approximately 70m above the hanging wall contact between the Gonneville Intrusion and the surrounding meta-sediments.

This discovery is considered significant because the new zone is located immediately south of the ~6.5km long Hartog AEM anomaly (within the Julimar State Forest). In addition, it confirms that there are other mineralised intrusions in the area that have no EM response. As such, it is interpreted that the Hartog AEM anomaly may stem from the northern extension of this mineralised zone, which in turn may represent the very southern extent of an entirely new intrusion (Hartog).

Chalice’s Conservation Management Plan for initial drilling at the Hartog-Baudin Targets within the Julimar State Forest (Stage 2 CMP) has been finalised and is currently under consideration by the WA State Government. Approval is expected shortly, which will allow the first ever drilling across ~10km of strike length of the Julimar Complex.

While CMP approval is awaited, Chalice has been continuing step-out and infill drilling at the Gonneville deposit with six rigs. A total of 225 diamond drill holes and 460 RC drill holes (including RC pre-collars with diamond tails) for ~180,000m have been completed to date at the Project.

New assay results have been received for 129 holes, which were not included in the Gonneville maiden Mineral Resource Estimate (Resource) of 330Mt @ 0.94g/t Pd+Pt+Au (3E), 0.16% Ni, 0.10% Cu, 0.016% Co (refer to ASX Announcement on 9 November 2021). Assay results are pending for a further 66 completed drill holes, with lab turnaround times currently averaging approximately four weeks.

New assay results have been received for drilling targeting:

• « The eastern (footwall) and western (hanging wall) contacts between the Gonneville Intrusion and surrounding meta-sediments;

• « Infill and down-dip extensions to the high-grade G1-G9 zones;

• « Infill of the shallow Inferred sections of the Gonneville Resource; and,

• « The non-magnetic pyroxenite and leucogabbro-rich north-western part of the Gonneville Intrusion.

Chalice Managing Director and Chief Executive Officer, Alex Dorsch, said: “Extensional drilling in an area previously considered to consist only of metasediments has intersected a tantalising new shallow zone of sulphide mineralisation, which is interpreted to be the potential southern extent of a new Hartog zone. The moderate nickel, copper and cobalt grades observed are considered particularly encouraging.

“We believe that the new ultramafic unit intersected is very unlikely to be Gonneville, given that it is separated by ~70m of metasediments and appears to be highly deformed and geochemically different. The new discovery has once again upgraded the prospectivity of the >6.5km long Hartog target immediately north of the new intersections.

“After lengthy consultation with the WA State Government, we believe our low-impact approach to initial drilling in the State Forest is close to being approved. We have received positive feedback on our approach to minimising disturbance and we are eagerly awaiting final approvals for drilling to commence at this exciting new frontier.”

==> picture [77 x 114] intentionally omitted <==

----- Start of picture text -----

2
----- End of picture text -----

2 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

Technical overview

New mineralised ultramafic unit discovered

The new zone of sulphide mineralisation to the north-west of the Gonneville Intrusion was initially recognised in visual logging as a narrow zone of matrix to semi-massive pyrrhotite-pentlanditechalcopyrite mineralisation, hosted within a strongly sheared ultramafic intrusion approximately 70m above the hanging wall contact of the Gonneville Intrusion (Figure 1 and Figure 3).

==> picture [495 x 176] intentionally omitted <==

Figure 1. Matrix to semi-massive sulphide mineralisation in JD211.

The new zone has so far been intersected in five wide-spaced holes, based on initial visual logging. Assays have been received for two of these holes, with significant high-grade (>0.6% NiEq) results including:

• « 3m @ 2.0g/t Pd , 0.3g/t Pt, 0.6% Ni, 0.5% Cu, 0.05% Co (~ 2.0% NiEq ) from 68m (JRC392);

• « 2m @ 1.8g/t Pd , 0.2g/t Pt, 0.6% Ni, 0.5% Cu, 0.06% Co (~ 1.9% NiEq ) from 139.2m (JD211);

The ultramafic unit appears to widen towards the north where it is trending towards the ~6.5km long Hartog AEM anomaly (Figure 2).

It is currently interpreted to be a separate intrusion which overlies the Gonneville Intrusion in sequence. However, the ultramafic unit intersected to date is relatively thin and strongly sheared and therefore a definitive conclusion is not yet possible. Mineralisation is not associated with significant zones of deformation / shearing within Gonneville.

The new discovery further increases the prospectivity of the Hartog target within the Julimar State Forest immediately north. Further step-out drilling is continuing targeting the new zone on private farmland.

==> picture [77 x 114] intentionally omitted <==

----- Start of picture text -----

3
----- End of picture text -----

3 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [730 x 448] intentionally omitted <==

Figure 2. Gonneville north and Hartog south Plan View – drilling results and Resource pit crest over ch15 Airborne EM.

==> picture [109 x 21] intentionally omitted <==

----- Start of picture text -----

4
----- End of picture text -----

4 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [607 x 450] intentionally omitted <==

Figure 3. Gonneville cross section 6,513,600mN +/- 30m.

==> picture [109 x 21] intentionally omitted <==

----- Start of picture text -----

5
----- End of picture text -----

5 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

Gonneville step-out drilling results

Drilling outside the Gonneville Resource pit shell (9 Nov 2021) continues to intersect broad intervals of sulphide mineralisation and continues to extend the high-grade zones (Figure 4).

Significant new high-grade (>0.6% NiEq) results include:

• « 23.3m @ 2.8g/t Pd , 0.7g/t Pt, 1.0g/t Au , 0.2% Ni, 1.5% Cu , 0.02% Co (~ 2.7% NiEq ) from 582m (JD142);

• « 7.1m @ 2.3g/t Pd, 0.9g/t Pt, 0.3% Ni, 0.9% Cu , 0.02% Co (~ 2.0% NiEq ) from 513m (JD157);

• « 4.4m @ 4.5g/t Pd, 2.2g/t Pt, 0.6% Ni, 0.2% Cu, 0.03% Co (~ 3.0% NiEq ) from 523m (JD157);

• « 8.2m @ 2.2g/t Pd, 1.1g/t Pt, 1.1g/t Au, 0.1% Ni, 0.1% Cu, 0.01% Co (~ 1.6% NiEq ) from 455m (JD162);

• « 12.9m @ 1.2g/t Pd , 0.3g/t Pt, 0.3% Ni, 0.3% Cu , 0.02% Co (~ 1.1% NiEq ) from 355m (JD172);

• « 5.0m @ 3.3g/t Pd, 0.8g/t Pt, 0.2g/t Au, 0.3% Ni, 0.7% Cu, 0.02% Co (~ 2.2% NiEq ) from 157m (JD167); « 8m @ 2.0g/t Pd, 0.5g/t Pt , 0.3% Ni, 0.3% Cu, 0.03% Co (~ 1.5% NiEq ) from 223m (JRC423); and,

• « 8m @ 1.4g/t Pd , 0.4g/t Pt, 0.4g/t Au , 0.2% Ni, 0.3% Cu, 0.02% Co (~ 1.1% NiEq ) from 107m (JRC403).

==> picture [77 x 114] intentionally omitted <==

----- Start of picture text -----

6
----- End of picture text -----

6 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [727 x 361] intentionally omitted <==

Figure 4. Gonneville 3D View (looking east-north-east) – drilling results, Resource blocks (>0.8% NiEq only) and pit shell.

==> picture [77 x 115] intentionally omitted <==

----- Start of picture text -----

7
----- End of picture text -----

7 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

Infill drilling results

Infill drilling within the Gonneville Resource pit shell (9 Nov 2021) has continued to deliver results in line with expectations. Refer to Appendix A for a full listing of results (infill and extensional).

Recent results indicate that the high-grade G2 zone continues further to the north at depth than previously interpreted. Additional drilling is required in the northern part of Gonneville, as high-grade extensions have the potential to deepen the Resource pit shell in this area.

Forward plan

Chalice’s Julimar Project strategy is to concurrently advance studies for an initial mining development on private farmland and to define the full extent of mineralisation along the >26km long Julimar Complex.

Ongoing and planned activities at Julimar include:

• « Step-out drilling (farmland) – Step-out diamond drilling on a nominal ~80m spacing is expected to continue until ~Q1 2022, subject to results. Step-out drilling is targeting the extension of highgrade (>0.6 NiEq) zones.

• « Infill drilling (farmland) – The northern portion of the Gonneville Resource is currently classified as Inferred and additional infill drilling is targeting conversion of the shallow (<250m deep) portion into the higher-confidence Indicated category.

• « Reconnaissance drilling at the Torres-Jansz and Baudin targets at the northern end of the Julimar Complex – First-pass AC drilling on private farmland will commence in the coming weeks.

• « Geotechnical, metallurgical, hydrogeological and infrastructure drilling (Gonneville) – AC/RC/diamond drilling to support studies for Gonneville will commence once resource drilling is complete and will continue through Q1 2022.

• « Metallurgical testwork (Gonneville) – ongoing testwork is now focused on optimisation of disseminated sulphide performance and continuing leach testwork on oxide composites. Investigation into further bulk concentrate enrichment alternatives has commenced for the disseminated sulphide mineralisation as part of the recent $2.9M grant from the Australian Government’s Co-operative Research Centre Projects (CRC-P) Program. Initial waste rock and tailings characterisation testwork continues.

• « Studies (Gonneville) – Work is underway to support studies for the project, which will assess potential mine development scenarios for the Gonneville Deposit. The Company anticipates that a Scoping Study for the initial stage of development at Gonneville will be completed in Q2 2022.

• « Low-impact reconnaissance drilling at the Hartog-Baudin Targets within the Julimar State Forest – First-pass low-impact drilling utilising small track-mounted diamond rigs is planned to commence immediately upon obtaining access and permitting approvals, which is expected shortly. A total of ~70 drill sites are planned across the ~10km strike length, with the ability to drill multiple angled holes at each site. No mechanised vegetation clearance is required to complete this first pass of drilling.

Authorised for release by the Disclosure Committee of the Company.

For further information please visit www.chalicemining.com or contact:

==> picture [77 x 114] intentionally omitted <==

----- Start of picture text -----

8
----- End of picture text -----

8 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

Corporate Enquiries

Media Enquiries

Follow our communications

Alex Dorsch Nicholas Read LinkedIn: chalice-mining Managing Director & CEO Principal and Managing Director Twitter: @chalicemining Chalice Mining Limited Read Corporate Investor Relations +61 8 9322 3960 +61 8 9388 1474 info@chalicemining.com info@readcorporate.com.au

About the Julimar Nickel-Copper-PGE Project

The 100%-owned Julimar Nickel-Copper-PGE Project is located ~70km north-east of Perth in Western Australia and is surrounded by world-class infrastructure. The Project was staked in early 2018 as part of Chalice’s global search for high-potential nickel sulphide exploration opportunities.

Chalice discovered the Gonneville deposit in the very first drill hole at the project in March 2020, intersecting shallow high-grade PGE-nickel-copper-cobalt-gold sulphide mineralisation. Gonneville is located on private farmland at the southern end of the interpreted >26km long Julimar Complex.

In November 2021, Chalice defined a tier-1 scale, pit-constrained maiden Mineral Resource Estimate (Resource) for Gonneville – 330Mt @ 0.94g/t Pd+Pt+Au (3E), 0.16% Ni, 0.10% Cu, 0.016% Co (~0.58% NiEq or ~1.6g/t PdEq)[2] . The maiden Resource confirmed Gonneville is the largest nickel sulphide discovery worldwide since 2000[3] , and the largest PGE discovery in Australian history – demonstrating the potential for Julimar to become a strategic, long-life ‘green metals’ asset.

The Resource includes a significant high-grade sulphide component, affording the project significant optionality in development and the potential to materially enhance project economics in the initial years of operations.

The Gonneville Resource is interpreted to cover just ~7% of the interpreted Julimar Complex strike length. As such the project is considered highly prospective for further orthomagmatic Ni-Cu-PGE discoveries.

The significant Julimar discovery has defined the new West Yilgarn Ni-Cu-PGE Province, an almost entirely unexplored mineral province which is interpreted to extend for ~1,200km along the western margin of the Yilgarn Craton. Chalice holds an unrivalled >8,000km[2] land position in this exciting new area and is leveraging its competitive ‘first mover’ advantage.

2 Refer to full Mineral Resource Statement in Appendix B 3 Source: S&P Global Market Intelligence, Capital IQ

==> picture [109 x 22] intentionally omitted <==

----- Start of picture text -----

9
----- End of picture text -----

9 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 609] intentionally omitted <==

Figure 5. Julimar Complex, Gonneville deposit, Project tenure and nearby infrastructure.

10 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

Competent Persons and Qualifying Persons Statement

The information in this announcement that relates to Exploration Results in relation to the Julimar Nickel-Copper-PGE Project is based on and fairly represents information and supporting documentation compiled by Mr. Bruce Kendall BSc (Hons), a Competent Person, who is a Member of the Australian Institute of Geoscientists. Mr. Kendall is a full-time employee of the Company as General Manager – Development and has sufficient experience that is relevant to the activity being undertaken to qualify as a Competent Person as defined in the 2012 edition of the Australasian Code for Reporting of Exploration Results, Minerals Resources and Ore Reserves, and is a Qualified Person under National Instrument 43-101 – ‘Standards of Disclosure for Mineral Projects’. The Qualified Person has verified the data disclosed in this release, including sampling, analytical and test data underlying the information contained in this release. Mr Kendall consents to the inclusion in the announcement of the matters based on his information in the form and context in which it appears.

The Information in this announcement that relates to Mineral Resources has been extracted from the ASX announcement titled “Tier 1 Scale Maiden Mineral Resource at Julimar” dated 9 November 2021 This announcement is available to view on the Company’s website at www.chalicemining.com.

The Company confirms that it is not aware of any new information or data that materially affects the information included in the original announcement and that all material assumptions and technical parameters underpinning the estimates in the original release continue to apply and have not materially changed. The Company confirms that the form and context in which the Competent Person and Qualified Person’s findings are presented have not been materially modified from the relevant original market announcement. Refer to Annexure B for further information on the Mineral Resource Estimate.

Forward Looking Statements

This announcement may contain forward-looking information, including forward looking information within the meaning of Canadian securities legislation and forward-looking statements within the meaning of the United States Private Securities Litigation Reform Act of 1995 (collectively, forwardlooking statements). These forward-looking statements are made as of the date of this report and Chalice Mining Limited (the Company) does not intend, and does not assume any obligation, to update these forward-looking statements.

Forward-looking statements relate to future events or future performance and reflect Company management’s expectations or beliefs regarding future events and include, but are not limited to: the impact of the discovery on the Julimar Project’s capital payback; the Company’s strategy; the estimated timing of drilling in the Julimar State Forest; the Company’s intended activities at the Julimar Project; and the success of future mining operations.

In certain cases, forward-looking statements can be identified by the use of words such as, “anticipates”, “considered”, “expected”, “highly”, “interpreted”, “likely”, “may”, “plan” or “planned”, “potential”, “prospectivity”, “will” or variations of such words and phrases or statements that certain actions, events or results may, could, would, might or will be taken, occur or be achieved or the negative of these terms or comparable terminology. By their very nature forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of the Company to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements.

Such factors may include, among others, risks related to actual results of current or planned exploration activities; whether geophysical and geochemical anomalies are related to economic mineralisation or some other feature; obtaining appropriate access to undertake additional ground disturbing exploration work on EM anomalies located in the Julimar State Forrest; the results from testing EM anomalies; results of planned metallurgical test work Including results from other zones not tested yet, scaling up to commercial operations; changes in project parameters as plans continue

11 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

to be refined; changes in exploration programs and budgets based upon the results of exploration, changes in commodity prices; economic conditions; grade or recovery rates; political and social risks, accidents, labour disputes and other risks of the mining industry; delays or difficulty in obtaining governmental approvals, necessary licences, permits or financing to undertake future mining development activities; changes to the regulatory framework within which Chalice operates or may in the future; movements in the share price of investments and the timing and proceeds realised on future disposals of investments, the impact of the COVID 19 pandemic as well as those factors detailed from time to time in the Company’s interim and annual financial statements, all of which are filed and available for review on SEDAR at sedar.com, ASX at asx.com.au and OTC Markets at otcmarkets.com.

Although the Company has attempted to identify important factors that could cause actual actions, events or results to differ materially from those described in forward-looking statements, there may be other factors that cause actions, events or results not to be as anticipated, estimated or intended. There can be no assurance that forward-looking statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements.

12 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

Appendix A Drilling and assay data

Table 1. Significant new drill intersections (Oxide: >0.3g/t Pd, >1g/t Pd. Sulphide: >0.4% NiEq, >0.6% NiEq).

	From	To	Interval	Pd	Pt	Au	Ni	Cu	Co
Hole ID	(m)	(m)	(m)	(g/t)	(g/t)	(g/t)	(%)	(%)	(%)	Geology	Type
JD133	33.0	61.0	28.0	0.80	0.14	0.01	0.15	0.10	0.01	Sulphide	Infill
Incl	41.0	43.6	2.6	1.86	0.14	0.02	0.21	0.33	0.02	Sulphide	Infill
and	45.7	51.0	5.3	0.85	0.18	0.01	0.17	0.06	0.02	Sulphide	Infill
and	55.0	61.0	6.0	1.11	0.21	0.01	0.16	0.07	0.02	Sulphide	Infill
JD133	72.0	132.0	60.0	0.66	0.14	<0.01	0.17	0.07	0.02	Sulphide	Infill
Incl	74.5	77.3	2.8	1.04	0.18	0.01	0.19	0.07	0.02	Sulphide	Infill
and	98.0	101.0	3.0	0.77	0.17	0.01	0.20	0.08	0.02	Sulphide	Infill
and	106.0	110.8	4.8	0.75	0.15	<0.01	0.18	0.17	0.02	Sulphide	Infill
and	114.0	116.0	2.0	0.80	0.16	<0.01	0.20	0.07	0.02	Sulphide	Infill
and	120.0	132.0	12.0	0.82	0.18	<0.01	0.19	0.06	0.02	Sulphide	Infill
JD133	172.4	177.0	4.6	0.43	0.08	<0.01	0.18	0.01	0.02	Sulphide	Infill
JD133	199.9	211.0	11.1	0.61	0.11	<0.01	0.14	0.04	0.01	Sulphide	Infill
JD133	218.0	233.0	15.0	0.56	0.14	<0.01	0.11	0.06	0.01	Sulphide	Infill
JD133	242.0	250.5	8.5	0.48	0.11	<0.01	0.17	0.04	0.01	Sulphide	Infill
JD133	320.4	322.5	2.1	0.77	0.21	0.01	0.21	0.08	0.02	Sulphide	Infill
JD133	343.0	348.8	5.8	0.65	0.14	0.04	0.14	0.11	0.01	Sulphide	Infill
JD133	353.0	362.0	9.0	1.79	0.26	0.01	0.18	0.05	0.02	Sulphide	Infill
Incl	353.0	355.8	2.7	4.83	0.65	0.02	0.26	0.12	0.03	Sulphide	Infill
JD134	32.8	49.0	16.3	0.54	0.10	0.01	0.14	0.06	0.01	Sulphide	Infill
Incl	37.0	39.0	2.0	0.74	0.15	0.01	0.24	0.10	0.02	Sulphide	Infill
JD134	61.0	66.0	5.0	0.64	0.13	0.01	0.16	0.03	0.02	Sulphide	Infill
JD134	77.0	120.0	43.0	0.59	0.13	0.01	0.18	0.06	0.02	Sulphide	Infill
Incl	78.9	82.0	3.1	0.81	0.17	0.01	0.15	0.13	0.02	Sulphide	Infill
and	115.4	120.0	4.7	1.52	0.36	0.02	0.31	0.26	0.02	Sulphide	Infill
JD134	126.0	148.0	22.0	0.52	0.11	<0.01	0.13	0.06	0.01	Sulphide	Infill
Incl	126.0	128.0	2.0	0.96	0.19	<0.01	0.17	0.08	0.02	Sulphide	Infill
JD134	228.1	250.2	22.1	0.57	0.12	0.01	0.15	0.07	0.02	Sulphide	Infill
JD134	276.0	281.6	5.6	0.39	0.09	<0.01	0.15	0.08	0.02	Sulphide	Infill
JD134	331.0	333.7	2.7	1.44	0.23	0.01	0.22	0.30	0.02	Sulphide	Infill
JD134	348.0	354.0	6.0	0.55	0.10	0.01	0.16	0.02	0.01	Sulphide	Infill
JD134	381.0	385.0	4.0	0.70	0.10	0.01	0.15	<0.01	0.01	Sulphide	Infill
JD134	389.7	411.6	21.9	0.50	0.11	0.01	0.17	0.06	0.01	Sulphide	Infill
Incl	389.7	394.0	4.3	0.58	0.15	0.03	0.17	0.25	0.02	Sulphide	Infill
JD134	418.0	427.0	9.0	0.88	0.13	0.01	0.23	0.08	0.02	Sulphide	Infill
JD134	433.0	446.0	13.0	1.39	0.19	0.02	0.31	0.58	0.03	Sulphide	Infill
Incl	440.0	445.2	5.2	2.70	0.30	0.04	0.53	1.36	0.05	Sulphide	Infill
JD135	16.5	37.0	20.5	0.96	0.21	0.01	0.18	0.08	0.02	Oxide	Infill
Incl	25.0	34.0	9.0	1.23	0.28	0.01	0.17	0.10	0.02	Oxide	Infill

13 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 695] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|JD135|61.0|87.0|26.0|0.60|0.12|0.01|0.16|0.04|0.02|Sulphide|Infill|
|JD136|44.0|127.7|83.7|0.62|0.15|0.03|0.17|0.08|0.02|Sulphide|Infill|
|Incl|49.0|56.0|7.0|1.03|0.34|0.02|0.24|0.06|0.03|Sulphide|Infill|
|and|63.0|65.0|2.0|0.51|0.12|0.04|0.15|0.40|0.02|Sulphide|Infill|
|and|73.0|79.0|6.0|0.65|0.14|0.02|0.19|0.12|0.02|Sulphide|Infill|
|and|87.0|89.0|2.0|1.39|0.51|0.03|0.20|0.05|0.02|Sulphide|Infill|
|and|107.0|110.0|3.0|1.00|0.21|0.04|0.19|0.11|0.02|Sulphide|Infill|
|JD137|54.6|60.0|5.4|1.06|0.34|0.02|0.16|0.25|0.01|Sulphide|Infill|
|JD137|79.5|96.5|17.0|0.59|0.12|0.01|0.14|0.09|0.01|Sulphide|Infill|
|Incl|90.0|96.5|6.5|1.00|0.19|0.01|0.17|0.07|0.02|Sulphide|Infill|
|JD137|124.0|189.0|65.0|0.75|0.14|<0.01|0.19|0.11|0.02|Sulphide|Infill|
|Incl|136.0|149.0|13.0|0.77|0.15|<0.01|0.17|0.08|0.02|Sulphide|Infill|
|and|153.0|163.8|10.8|1.21|0.23|0.01|0.33|0.28|0.02|Sulphide|Infill|
|and|171.0|182.0|11.0|0.78|0.15|<0.01|0.18|0.12|0.02|Sulphide|Infill|
|JD137|251.0|257.0|6.0|0.58|0.11|<0.01|0.14|0.05|0.02|Sulphide|Infill|
|JD137|278.0|282.0|4.0|0.57|0.12|0.01|0.17|0.05|0.02|Sulphide|Infill|
|JD137|373.6|381.0|7.4|3.19|0.60|0.04|0.27|0.17|0.02|Sulphide|Infill|
|JD137|390.0|403.0|13.0|0.47|0.10|0.01|0.17|0.01|0.02|Sulphide|Infill|
|JD137|405.9|418.0|12.1|0.50|0.11|0.01|0.21|0.06|0.02|Sulphide|Infill|
|JD137|430.0|451.0|21.0|0.54|0.10|0.01|0.15|0.06|0.01|Sulphide|Infill|
|JD137|458.2|516.0|57.8|0.91|0.17|0.16|0.15|0.28|0.01|Sulphide|Infill|
|Incl|458.2|460.4|2.2|1.29|0.16|0.06|0.19|0.19|0.02|Sulphide|Infill|
|and|490.0|492.0|2.0|2.60|0.40|0.18|0.11|0.09|0.01|Sulphide|Infill|
|and|495.3|498.0|2.8|1.58|0.30|0.28|0.13|1.71|0.02|Sulphide|Infill|
|and|501.0|511.6|10.7|2.06|0.32|0.62|0.18|0.79|0.01|Sulphide|Infill|
|JD137|526.0|552.8|26.8|2.00|0.55|0.33|0.18|0.91|0.02|Sulphide|Infill|
|Incl|526.0|533.5|7.5|3.05|1.27|0.61|0.23|2.25|0.02|Sulphide|Infill|
|and|538.0|552.8|14.8|1.91|0.34|0.28|0.17|0.48|0.02|Sulphide|Infill|
|JD138|5.0|29.4|24.4|1.11|0.31|0.01|0.10|0.09|0.03|Oxide|Infill|
|Incl|7.1|22.8|15.7|1.48|0.43|0.01|0.11|0.11|0.05|Oxide|Infill|
|JD138|35.7|47.0|11.3|0.63|0.12|0.01|0.15|0.08|0.01|Sulphide|Infill|
|Incl|35.7|38.0|2.3|1.05|0.18|0.02|0.15|0.07|0.01|Sulphide|Infill|
|JD138|60.9|185.0|124.2|0.74|0.18|0.04|0.16|0.13|0.02|Sulphide|Infill|
|Incl|72.0|75.0|3.0|0.80|0.33|0.01|0.13|0.07|0.01|Sulphide|Infill|
|and|85.0|90.0|5.0|0.97|0.29|0.02|0.17|0.15|0.02|Sulphide|Infill|
|and|97.0|100.0|3.0|0.96|0.49|0.16|0.19|0.31|0.02|Sulphide|Infill|
|and|143.0|176.0|33.0|0.92|0.20|0.06|0.18|0.17|0.02|Sulphide|Infill|
|and|182.0|184.0|2.0|1.43|0.27|0.07|0.20|0.11|0.02|Sulphide|Ext|
|JD138|197.0|199.0|2.0|0.06|<0.01|2.29|0.01|0.19|0.01|Sulphide|Ext|
|JD139|19.0|40.0|21.0|0.91|0.20|0.01|0.21|0.09|0.03|Oxide|Infill|
|Incl|19.0|23.1|4.1|1.15|0.29|0.01|0.28|0.12|0.09|Oxide|Infill|

----- End of picture text -----

14 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 696] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|and|29.9|37.2|7.3|1.25|0.29|0.02|0.19|0.11|0.02|Oxide|Infill|
|JD139|40.0|60.0|20.0|0.49|0.10|0.01|0.16|0.05|0.01|Sulphide|Infill|
|Incl|40.0|43.1|3.1|1.08|0.20|0.01|0.23|0.05|0.02|Sulphide|Infill|
|JD139|69.0|78.0|9.0|0.41|0.07|0.01|0.15|0.05|0.02|Sulphide|Infill|
|JD139|85.0|96.0|11.0|0.56|0.16|0.02|0.16|0.07|0.02|Sulphide|Infill|
|JD139|101.0|125.0|24.0|0.66|0.12|0.02|0.15|0.06|0.01|Sulphide|Infill|
|Incl|120.0|123.0|3.0|0.90|0.16|0.02|0.18|0.07|0.02|Sulphide|Infill|
|JD139|132.0|139.0|7.0|0.44|0.11|0.01|0.14|0.05|0.01|Sulphide|Infill|
|JD139|144.3|184.0|39.7|0.71|0.14|0.03|0.16|0.08|0.02|Sulphide|Infill|
|Incl|149.0|151.0|2.0|0.79|0.13|0.03|0.19|0.15|0.02|Sulphide|Infill|
|and|162.6|169.0|6.5|1.17|0.24|0.02|0.18|0.08|0.02|Sulphide|Infill|
|and|175.0|182.0|7.0|0.86|0.20|0.02|0.16|0.09|0.02|Sulphide|Ext|
|JD140|7.0|25.5|18.5|0.77|0.05|<0.01|0.04|0.04|0.01|Oxide|Infill|
|Incl|14.2|20.5|6.4|1.05|0.06|0.01|0.04|0.06|0.01|Oxide|Infill|
|JD141|34.1|56.0|21.9|0.55|0.11|0.04|0.16|0.10|0.02|Sulphide|Infill|
|Incl|35.0|44.0|9.0|0.75|0.14|0.08|0.18|0.17|0.02|Sulphide|Infill|
|JD141|68.0|97.0|29.0|0.45|0.09|<0.01|0.17|0.04|0.02|Sulphide|Infill|
|Incl|84.0|86.0|2.0|0.91|0.18|<0.01|0.22|0.03|0.02|Sulphide|Infill|
|JD141|103.0|122.0|19.0|0.62|0.11|<0.01|0.15|0.06|0.02|Sulphide|Infill|
|Incl|104.0|110.0|6.0|0.92|0.16|0.01|0.16|0.07|0.02|Sulphide|Infill|
|JD141|127.0|169.0|42.0|0.66|0.15|0.01|0.18|0.08|0.02|Sulphide|Infill|
|Incl|152.1|158.0|5.9|0.79|0.15|0.02|0.19|0.08|0.02|Sulphide|Infill|
|JD141|174.0|195.0|21.0|0.73|0.15|0.04|0.19|0.14|0.02|Sulphide|Infill|
|Incl|190.0|194.0|4.0|1.72|0.31|0.12|0.39|0.26|0.04|Sulphide|Infill|
|JD141|201.0|216.0|15.0|0.74|0.18|0.02|0.20|0.18|0.03|Sulphide|Infill|
|Incl|206.0|211.0|5.0|1.66|0.42|0.03|0.36|0.26|0.05|Sulphide|Infill|
|JD141|226.0|235.0|9.0|0.98|0.28|0.01|0.16|0.07|0.02|Sulphide|Infill|
|Incl|230.0|233.0|3.0|2.13|0.65|0.03|0.32|0.18|0.03|Sulphide|Infill|
|JD141|241.0|271.0|30.0|0.86|0.19|0.01|0.18|0.06|0.02|Sulphide|Infill|
|Incl|242.0|253.0|11.0|1.26|0.28|0.01|0.18|0.08|0.02|Sulphide|Infill|
|JD141|283.0|295.0|12.0|1.04|0.26|0.01|0.26|0.13|0.02|Sulphide|Infill|
|Incl|283.0|287.0|4.0|2.11|0.58|0.02|0.46|0.35|0.03|Sulphide|Infill|
|JD141|324.0|361.0|37.0|0.67|0.13|0.01|0.18|0.05|0.02|Sulphide|Infill|
|Incl|325.0|330.0|5.0|0.75|0.15|0.01|0.20|0.06|0.02|Sulphide|Infill|
|and|331.0|333.0|2.0|0.80|0.15|0.01|0.20|0.03|0.02|Sulphide|Infill|
|and|339.0|347.0|8.0|0.88|0.16|0.01|0.21|0.08|0.02|Sulphide|Infill|
|JD142|63.2|78.8|15.6|0.44|0.09|0.01|0.13|0.11|0.02|Sulphide|Infill|
|JD142|142.0|226.0|84.0|0.62|0.12|0.01|0.17|0.07|0.02|Sulphide|Infill|
|Incl|149.0|161.0|12.0|1.19|0.27|0.01|0.23|0.18|0.02|Sulphide|Infill|
|and|214.0|218.0|4.0|0.75|0.06|0.01|0.20|0.11|0.02|Sulphide|Infill|
|JD142|230.5|243.0|12.5|0.83|0.16|<0.01|0.17|0.08|0.02|Sulphide|Infill|

----- End of picture text -----

15 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 696] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|Incl|234.0|242.0|8.0|0.88|0.17|0.01|0.17|0.12|0.02|Sulphide|Infill|
|JD142|321.3|346.5|25.2|0.65|0.13|0.02|0.13|0.04|0.02|Sulphide|Infill|
|Incl|322.0|324.0|2.0|0.98|0.19|0.01|0.13|0.04|0.02|Sulphide|Infill|
|JD142|418.1|480.7|62.6|0.62|0.13|0.02|0.17|0.05|0.02|Sulphide|Infill|
|Incl|438.0|440.0|2.0|1.28|0.32|0.01|0.17|0.05|0.02|Sulphide|Infill|
|and|444.0|449.0|5.0|0.75|0.16|0.03|0.19|0.08|0.02|Sulphide|Infill|
|and|465.0|468.0|3.0|0.80|0.16|0.09|0.18|0.04|0.02|Sulphide|Infill|
|JD142|515.1|531.8|16.6|0.40|0.10|0.01|0.16|0.04|0.01|Sulphide|Ext|
|JD142|533.0|564.0|31.0|0.49|0.18|0.03|0.17|0.07|0.01|Sulphide|Ext|
|Incl|537.0|539.0|2.0|0.73|0.44|0.05|0.22|0.33|0.02|Sulphide|Ext|
|and|543.0|546.0|3.0|0.63|0.56|0.03|0.17|0.07|0.01|Sulphide|Ext|
|and|560.0|562.0|2.0|0.85|0.15|0.04|0.26|0.12|0.02|Sulphide|Ext|
|JD142|569.3|605.3|36.0|2.06|0.50|0.68|0.20|0.98|0.02|Sulphide|Ext|
|Incl|574.0|576.0|2.0|2.18|0.10|0.44|0.17|0.12|0.01|Sulphide|Ext|
|and|582.0|605.3|23.3|2.81|0.71|0.97|0.23|1.46|0.02|Sulphide|Ext|
|JD143|66.3|77.0|10.7|0.72|0.17|0.01|0.16|0.08|0.02|Sulphide|Infill|
|Incl|66.3|70.0|3.7|0.91|0.23|0.01|0.19|0.11|0.02|Sulphide|Infill|
|JD143|83.0|104.0|21.0|0.80|0.17|0.01|0.17|0.04|0.02|Sulphide|Infill|
|Incl|83.0|88.0|5.0|0.79|0.14|0.01|0.18|0.10|0.02|Sulphide|Infill|
|and|91.4|102.0|10.6|0.94|0.21|0.01|0.18|0.02|0.01|Sulphide|Infill|
|JD143|136.0|220.0|84.0|0.72|0.14|0.05|0.14|0.11|0.02|Sulphide|Infill|
|Incl|149.0|152.0|3.0|1.66|0.31|0.06|0.28|0.22|0.03|Sulphide|Infill|
|and|160.0|166.0|6.0|1.42|0.20|0.15|0.21|0.23|0.02|Sulphide|Infill|
|and|169.0|172.0|3.0|0.99|0.12|0.32|0.14|0.26|0.01|Sulphide|Infill|
|and|181.0|189.0|8.0|0.88|0.16|0.04|0.16|0.12|0.02|Sulphide|Infill|
|and|193.0|196.0|3.0|0.91|0.36|0.01|0.12|0.05|0.01|Sulphide|Infill|
|JD144|15.0|24.8|9.8|0.97|0.24|0.02|0.16|0.06|0.01|Oxide|Infill|
|Incl|16.1|23.0|6.9|1.14|0.25|0.02|0.19|0.07|0.01|Oxide|Infill|
|JD144|42.0|51.0|9.0|0.53|0.09|<0.01|0.16|0.04|0.02|Oxide|Infill|
|JD144|60.0|121.0|61.0|0.56|0.13|0.02|0.15|0.06|0.02|Sulphide|Infill|
|Incl|96.0|99.0|3.0|0.99|0.33|0.06|0.20|0.08|0.02|Sulphide|Infill|
|and|105.0|108.0|3.0|0.87|0.27|0.03|0.19|0.18|0.02|Sulphide|Infill|
|JD145|55.0|60.0|5.0|0.56|0.11|0.02|0.16|0.09|0.02|Sulphide|Infill|
|JD145|67.0|77.0|10.0|0.58|0.17|0.01|0.15|0.06|0.02|Sulphide|Infill|
|Incl|73.0|75.0|2.0|1.02|0.41|0.03|0.18|0.19|0.02|Sulphide|Infill|
|JD145|91.0|158.0|67.0|0.63|0.13|0.01|0.16|0.05|0.01|Sulphide|Infill|
|Incl|102.0|105.0|3.0|1.11|0.26|0.05|0.21|0.15|0.02|Sulphide|Infill|
|and|111.0|119.0|8.0|1.42|0.27|0.02|0.20|0.10|0.02|Sulphide|Infill|
|and|135.0|137.0|2.0|1.12|0.24|0.01|0.15|0.02|0.02|Sulphide|Infill|
|JD145|238.4|263.0|24.7|0.77|0.16|0.01|0.16|0.07|0.02|Sulphide|Infill|
|Incl|238.4|241.0|2.7|0.95|0.18|0.01|0.17|0.04|0.02|Sulphide|Infill|

----- End of picture text -----

16 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 696] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|and|248.0|254.1|6.1|1.15|0.24|0.01|0.21|0.10|0.02|Sulphide|Infill|
|JD145|269.0|305.2|36.2|0.78|0.16|0.01|0.12|0.08|0.01|Sulphide|Infill|
|Incl|273.0|277.7|4.7|0.85|0.15|0.01|0.16|0.11|0.02|Sulphide|Infill|
|and|281.0|289.0|8.0|0.96|0.20|0.01|0.12|0.08|0.01|Sulphide|Infill|
|and|293.0|297.0|4.0|0.95|0.18|0.01|0.14|0.14|0.02|Sulphide|Infill|
|JD145|341.0|351.9|10.9|1.79|0.25|0.03|0.41|0.21|0.03|Sulphide|Infill|
|Incl|342.0|344.0|2.0|1.00|0.21|0.01|0.24|0.15|0.02|Sulphide|Infill|
|and|347.0|351.9|4.9|3.20|0.41|0.05|0.70|0.40|0.05|Sulphide|Infill|
|JD145|358.0|377.0|19.0|1.35|0.38|0.03|0.28|0.11|0.02|Sulphide|Infill|
|Incl|362.0|370.9|8.9|2.16|0.67|0.05|0.43|0.20|0.03|Sulphide|Infill|
|JD145|400.0|414.0|14.0|0.49|0.10|0.01|0.15|0.05|0.01|Sulphide|Infill|
|JD145|422.0|447.8|25.8|0.46|0.10|0.02|0.18|0.06|0.02|Sulphide|Infill|
|JD146|25.0|43.0|18.0|0.68|0.16|0.01|0.21|0.05|0.03|Oxide|Infill|
|Incl|25.0|30.0|5.0|1.09|0.28|0.01|0.25|0.05|0.04|Oxide|Infill|
|JD146|49.0|57.6|8.6|1.36|0.27|0.01|0.24|0.07|0.02|Oxide|Infill|
|Incl|53.0|57.0|4.0|2.36|0.45|0.02|0.28|0.13|0.03|Oxide|Infill|
|JD146|57.6|70.0|12.4|0.70|0.14|0.01|0.16|0.04|0.02|Sulphide|Infill|
|Incl|63.0|66.0|3.0|0.93|0.18|0.01|0.17|0.10|0.02|Sulphide|Infill|
|JD146|78.0|83.0|5.0|1.08|0.16|0.02|0.20|0.06|0.02|Sulphide|Infill|
|Incl|79.0|81.8|2.8|1.46|0.20|0.02|0.25|0.06|0.02|Sulphide|Infill|
|JD147|13.3|49.8|36.5|1.10|0.25|0.02|0.24|0.06|0.04|Oxide|Infill|
|Incl|13.3|29.4|16.1|1.21|0.28|0.02|0.27|0.09|0.06|Oxide|Infill|
|and|44.8|47.0|2.2|4.91|1.13|0.08|0.68|0.09|0.07|Oxide|Infill|
|JD150|0.6|5.7|5.1|0.72|0.05|<0.01|0.02|0.04|<0.01|Oxide|Infill|
|JD150|20.0|37.0|17.0|1.14|0.23|0.07|0.15|0.10|0.01|Oxide|Infill|
|Incl|21.0|27.8|6.8|1.38|0.31|0.08|0.18|0.15|0.02|Oxide|Infill|
|and|32.0|37.0|5.0|1.29|0.25|0.08|0.16|0.06|0.02|Oxide|Infill|
|JD150|37.0|59.0|22.0|0.72|0.13|0.01|0.17|0.06|0.02|Sulphide|Infill|
|Incl|37.0|42.0|5.0|1.43|0.26|0.03|0.22|0.04|0.02|Sulphide|Infill|
|JD150|70.0|135.0|65.0|0.55|0.12|0.01|0.15|0.06|0.01|Sulphide|Infill|
|Incl|106.6|109.0|2.4|0.65|0.14|0.01|0.18|0.17|0.02|Sulphide|Infill|
|and|114.0|116.0|2.0|0.93|0.18|0.01|0.19|0.03|0.02|Sulphide|Infill|
|and|132.0|134.5|2.5|0.67|0.13|0.01|0.18|0.18|0.02|Sulphide|Infill|
|JD150|139.0|154.5|15.5|0.51|0.12|0.01|0.16|0.06|0.01|Sulphide|Infill|
|JD150|168.0|173.0|5.0|0.40|0.12|0.01|0.15|0.10|0.01|Sulphide|Infill|
|JD150|187.6|194.0|6.4|0.59|0.08|0.02|0.14|0.09|0.01|Sulphide|Infill|
|JD150|221.0|254.0|33.0|1.31|0.27|0.02|0.21|0.10|0.02|Sulphide|Infill|
|Incl|221.0|229.0|8.0|3.54|0.74|0.06|0.37|0.19|0.03|Sulphide|Infill|
|and|236.0|239.0|3.0|0.78|0.16|0.02|0.20|0.05|0.02|Sulphide|Infill|
|and|244.0|246.0|2.0|1.11|0.20|0.02|0.23|0.56|0.02|Sulphide|Infill|
|JD150|277.7|308.8|31.1|0.57|0.15|0.01|0.18|0.06|0.01|Sulphide|Infill|

----- End of picture text -----

17 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 696] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|Incl|277.7|280.0|2.3|1.27|0.24|0.06|0.41|0.47|0.03|Sulphide|Infill|
|JD150|328.0|345.5|17.5|0.50|0.10|0.01|0.18|0.04|0.02|Sulphide|Infill|
|JD153|13.5|23.0|9.5|1.07|0.27|0.01|0.14|0.10|0.02|Oxide|Infill|
|Incl|14.9|21.0|6.1|1.24|0.33|0.01|0.14|0.11|0.02|Oxide|Infill|
|JD153|27.0|68.5|41.5|0.60|0.13|0.02|0.15|0.05|0.01|Sulphide|Infill|
|Incl|51.0|54.0|3.0|1.16|0.22|0.01|0.15|0.06|0.01|Sulphide|Infill|
|and|65.0|68.5|3.5|1.02|0.25|0.11|0.13|0.08|0.01|Sulphide|Infill|
|JD156|58.4|66.0|7.6|0.49|0.11|0.01|0.15|0.08|0.02|Sulphide|Infill|
|JD156|76.0|169.0|93.0|0.61|0.13|0.01|0.15|0.06|0.02|Sulphide|Infill|
|Incl|77.0|81.0|4.0|0.87|0.19|0.01|0.16|0.07|0.02|Sulphide|Infill|
|and|96.0|103.0|7.0|0.94|0.19|0.01|0.18|0.14|0.02|Sulphide|Infill|
|and|122.0|125.0|3.0|0.82|0.17|0.01|0.21|0.07|0.02|Sulphide|Infill|
|and|135.0|142.0|7.0|0.91|0.23|0.01|0.18|0.08|0.02|Sulphide|Infill|
|and|154.0|157.0|3.0|1.20|0.26|<0.01|0.15|0.08|0.01|Sulphide|Infill|
|JD156|174.0|179.0|5.0|0.57|0.11|<0.01|0.16|0.02|0.01|Sulphide|Infill|
|JD156|242.2|249.3|7.1|0.43|0.08|0.01|0.23|0.02|0.02|Sulphide|Infill|
|JD156|285.0|293.0|8.0|0.54|0.11|0.01|0.14|0.07|0.01|Sulphide|Infill|
|JD156|334.0|346.5|12.5|0.37|0.08|0.01|0.15|0.06|0.02|Sulphide|Infill|
|JD156|379.0|403.9|24.9|0.49|0.11|0.02|0.13|0.04|0.01|Sulphide|Infill|
|JD156|416.0|421.4|5.4|0.56|0.12|0.03|0.17|0.03|0.01|Sulphide|Infill|
|JD157|196.0|253.0|57.0|0.67|0.13|0.01|0.16|0.07|0.02|Sulphide|Infill|
|Incl|206.2|213.5|7.3|1.18|0.15|0.02|0.33|0.15|0.03|Sulphide|Infill|
|and|239.0|242.0|3.0|0.87|0.16|<0.01|0.18|0.09|0.02|Sulphide|Infill|
|and|250.0|253.0|3.0|1.10|0.19|0.01|0.17|0.08|0.02|Sulphide|Infill|
|JD157|264.0|290.0|26.0|0.84|0.17|0.02|0.16|0.10|0.02|Sulphide|Ext|
|Incl|270.0|281.0|11.0|1.14|0.24|0.02|0.17|0.15|0.02|Sulphide|Ext|
|and|286.0|288.0|2.0|0.89|0.17|0.01|0.20|0.07|0.02|Sulphide|Infill|
|JD157|295.0|317.2|22.2|0.49|0.12|0.01|0.15|0.05|0.01|Sulphide|Ext|
|JD157|324.0|351.0|27.0|0.78|0.12|0.01|0.22|0.18|0.03|Sulphide|Ext|
|Incl|324.0|328.0|4.0|1.31|0.27|0.01|0.16|0.21|0.02|Sulphide|Ext|
|JD157|357.1|362.3|5.2|0.50|0.13|0.01|0.13|0.07|0.01|Sulphide|Ext|
|JD157|363.8|368.4|4.7|0.54|0.11|0.01|0.12|0.07|0.01|Sulphide|Ext|
|JD157|371.0|391.8|20.8|0.43|0.09|0.01|0.12|0.10|0.01|Sulphide|Ext|
|JD157|405.2|444.0|38.8|0.43|0.09|0.01|0.14|0.07|0.02|Sulphide|Ext|
|JD157|450.0|454.0|4.0|0.34|0.08|0.01|0.14|0.19|0.02|Sulphide|Ext|
|JD157|464.0|489.0|25.0|0.66|0.13|0.01|0.21|0.05|0.02|Sulphide|Ext|
|JD157|509.4|535.0|25.6|1.85|0.72|0.02|0.26|0.33|0.02|Sulphide|Ext|
|Incl|513.0|520.1|7.1|2.32|0.92|0.04|0.27|0.90|0.02|Sulphide|Ext|
|and|523.0|527.4|4.4|4.49|2.22|0.05|0.57|0.23|0.03|Sulphide|Ext|
|JD157|539.4|573.5|34.1|0.62|0.12|0.02|0.18|0.05|0.02|Sulphide|Ext|
|Incl|553.0|561.0|8.0|0.80|0.14|0.02|0.22|0.09|0.02|Sulphide|Ext|

----- End of picture text -----

18 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 696] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|JD157|631.9|674.0|42.1|0.47|0.12|0.01|0.16|0.05|0.01|Sulphide|Ext|
|JD157|679.0|686.0|7.0|0.61|0.14|0.08|0.16|0.16|0.02|Sulphide|Ext|
|Incl|680.0|684.6|4.6|0.63|0.13|0.12|0.20|0.18|0.02|Sulphide|Ext|
|JD158|10.0|25.0|15.0|0.69|0.31|0.02|0.11|0.12|0.08|Oxide|Infill|
|JD158|35.1|79.0|43.9|0.57|0.12|0.01|0.15|0.05|0.02|Sulphide|Infill|
|Incl|69.2|72.0|2.8|1.03|0.21|0.01|0.16|0.04|0.02|Sulphide|Infill|
|JD158|85.0|146.0|61.0|0.64|0.14|0.01|0.14|0.05|0.01|Sulphide|Infill|
|Incl|96.0|98.0|2.0|0.77|0.15|0.01|0.19|0.05|0.02|Sulphide|Infill|
|and|138.0|141.0|3.0|0.97|0.20|0.01|0.16|0.07|0.02|Sulphide|Infill|
|JD158|153.0|167.0|14.0|0.50|0.11|<0.01|0.15|0.04|0.01|Sulphide|Infill|
|JD158|209.0|242.0|33.0|1.87|0.35|0.05|0.25|0.14|0.02|Sulphide|Infill|
|Incl|213.0|236.0|23.0|2.49|0.46|0.07|0.29|0.19|0.02|Sulphide|Infill|
|JD158|252.0|261.0|9.0|0.51|0.09|0.01|0.16|0.07|0.01|Sulphide|Infill|
|JD159|9.0|21.0|12.0|0.88|0.27|0.01|0.07|0.13|0.04|Oxide|Infill|
|Incl|16.3|20.5|4.2|1.27|0.52|0.01|0.11|0.18|0.09|Oxide|Infill|
|JD159|24.0|36.0|12.0|0.46|0.10|0.01|0.17|0.08|0.02|Sulphide|Infill|
|JD159|47.0|58.2|11.2|0.48|0.10|0.01|0.14|0.06|0.01|Sulphide|Infill|
|Incl|50.0|53.0|3.0|0.81|0.17|0.01|0.17|0.05|0.02|Sulphide|Infill|
|JD159|62.3|111.7|49.4|0.61|0.14|0.02|0.15|0.09|0.01|Sulphide|Infill|
|Incl|69.0|72.4|3.4|0.89|0.19|0.02|0.17|0.13|0.02|Sulphide|Infill|
|and|90.5|97.0|6.6|1.02|0.22|0.05|0.19|0.11|0.02|Sulphide|Infill|
|and|101.5|108.0|6.5|1.03|0.20|0.04|0.17|0.22|0.02|Sulphide|Infill|
|JD159|174.1|189.0|14.9|0.67|0.14|<0.01|0.16|0.04|0.02|Sulphide|Infill|
|Incl|186.0|189.0|3.0|0.88|0.21|0.01|0.17|0.11|0.02|Sulphide|Infill|
|JD159|200.4|256.0|55.6|0.63|0.13|<0.01|0.14|0.05|0.01|Sulphide|Infill|
|Incl|202.0|208.0|6.0|1.07|0.27|<0.01|0.16|0.03|0.01|Sulphide|Infill|
|and|252.0|256.0|4.0|0.88|0.15|0.01|0.16|0.06|0.02|Sulphide|Infill|
|JD159|267.0|275.0|8.0|0.82|0.15|0.01|0.15|0.08|0.02|Sulphide|Infill|
|Incl|273.0|275.0|2.0|1.70|0.21|0.02|0.21|0.11|0.02|Sulphide|Infill|
|JD159|281.0|380.8|99.8|0.86|0.14|0.01|0.22|0.09|0.02|Sulphide|Infill|
|Incl|284.3|290.0|5.6|0.84|0.18|0.02|0.18|0.09|0.02|Sulphide|Infill|
|and|299.3|307.0|7.7|1.06|0.15|0.01|0.22|0.06|0.02|Sulphide|Infill|
|and|313.0|315.0|2.0|0.93|0.12|0.01|0.24|0.07|0.02|Sulphide|Infill|
|and|319.0|326.1|7.1|1.19|0.27|0.02|0.17|0.08|0.01|Sulphide|Infill|
|and|334.0|336.0|2.0|2.45|0.43|0.01|0.49|0.24|0.04|Sulphide|Infill|
|and|338.4|342.0|3.7|4.90|0.29|0.05|1.49|0.84|0.09|Sulphide|Infill|
|and|358.1|360.2|2.1|4.14|0.38|0.02|0.48|0.14|0.03|Sulphide|Infill|
|JD160|8.0|25.1|17.1|1.56|0.47|0.01|0.16|0.17|0.13|Oxide|Infill|
|Incl|9.0|24.0|15.0|1.71|0.52|0.02|0.16|0.19|0.15|Oxide|Infill|
|JD160|30.0|35.2|5.2|0.54|0.12|0.01|0.14|0.09|0.02|Sulphide|Infill|
|JD160|40.0|139.2|99.2|0.59|0.13|0.02|0.15|0.09|0.02|Sulphide|Infill|

----- End of picture text -----

19 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 696] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|Incl|51.0|53.0|2.0|0.62|0.15|0.10|0.15|0.21|0.02|Sulphide|Infill|
|and|94.0|105.0|11.0|0.72|0.17|0.02|0.19|0.14|0.02|Sulphide|Infill|
|and|115.0|128.0|13.0|0.91|0.20|0.01|0.17|0.12|0.02|Sulphide|Infill|
|JD161|39.0|80.0|41.0|0.59|0.12|0.02|0.15|0.08|0.02|Sulphide|Infill|
|Incl|65.0|70.0|5.0|0.91|0.17|0.02|0.23|0.09|0.02|Sulphide|Infill|
|and|75.0|79.0|4.0|0.78|0.15|0.08|0.16|0.26|0.02|Sulphide|Infill|
|JD161|90.2|236.0|145.8|0.97|0.24|0.10|0.14|0.08|0.01|Sulphide|Infill|
|Incl|116.0|122.0|6.0|1.07|0.38|0.05|0.14|0.09|0.02|Sulphide|Infill|
|and|126.0|138.0|12.0|1.02|0.26|0.04|0.16|0.05|0.01|Sulphide|Infill|
|and|157.0|161.0|4.0|0.87|0.21|0.12|0.15|0.06|0.01|Sulphide|Infill|
|and|166.0|175.0|9.0|1.09|0.29|0.22|0.15|0.12|0.01|Sulphide|Infill|
|and|180.0|188.0|8.0|1.72|0.39|0.22|0.16|0.10|0.01|Sulphide|Infill|
|and|200.0|205.0|5.0|3.90|1.20|0.11|0.13|0.05|0.01|Sulphide|Infill|
|and|209.0|223.0|14.0|1.43|0.15|0.31|0.14|0.24|0.01|Sulphide|Ext|
|and|233.0|235.0|2.0|5.63|2.26|0.31|0.20|0.13|0.02|Sulphide|Ext|
|JD162|6.8|17.0|10.2|1.02|0.46|0.01|0.14|0.16|0.10|Oxide|Infill|
|Incl|7.0|14.7|7.7|1.10|0.51|0.01|0.13|0.16|0.11|Oxide|Infill|
|JD162|32.1|135.2|103.1|0.96|0.20|0.01|0.18|0.09|0.02|Sulphide|Infill|
|Incl|32.1|37.0|4.9|0.78|0.16|0.01|0.17|0.09|0.02|Sulphide|Infill|
|and|66.0|76.9|10.9|0.96|0.20|0.01|0.19|0.08|0.02|Sulphide|Infill|
|and|96.0|101.0|5.0|0.67|0.15|0.01|0.20|0.11|0.02|Sulphide|Infill|
|and|107.3|115.0|7.8|4.27|0.84|0.07|0.37|0.31|0.03|Sulphide|Infill|
|JD162|145.0|157.0|12.0|0.46|0.10|<0.01|0.17|0.04|0.02|Sulphide|Infill|
|JD162|170.6|179.0|8.4|4.19|0.88|0.03|0.70|0.43|0.05|Sulphide|Infill|
|Incl|170.6|177.7|7.1|4.86|1.02|0.03|0.80|0.50|0.05|Sulphide|Infill|
|JD162|200.0|249.8|49.8|0.68|0.15|0.02|0.19|0.03|0.02|Sulphide|Infill|
|Incl|200.0|202.4|2.4|4.54|0.80|0.06|0.89|0.24|0.06|Sulphide|Infill|
|JD162|293.3|301.0|7.7|0.46|0.09|<0.01|0.16|0.02|0.01|Sulphide|Infill|
|JD162|306.0|364.0|58.0|0.87|0.11|0.18|0.16|0.08|0.01|Sulphide|Infill|
|Incl|350.0|353.0|3.0|1.88|0.17|0.16|0.15|0.48|0.02|Sulphide|Infill|
|and|357.0|364.0|7.0|3.20|0.09|1.26|0.16|0.21|0.02|Sulphide|Infill|
|JD162|371.0|429.2|58.2|0.72|0.21|0.09|0.16|0.18|0.01|Sulphide|Infill|
|Incl|379.0|382.7|3.7|0.39|0.09|0.15|0.17|0.30|0.02|Sulphide|Infill|
|and|392.0|412.3|20.3|1.06|0.25|0.16|0.19|0.34|0.02|Sulphide|Infill|
|and|417.3|421.5|4.2|1.34|0.34|0.03|0.21|0.20|0.02|Sulphide|Infill|
|and|427.0|429.2|2.2|0.78|0.26|0.01|0.18|0.16|0.02|Sulphide|Infill|
|JD162|436.8|441.0|4.2|0.61|0.13|0.02|0.18|0.12|0.02|Sulphide|Infill|
|Incl|436.8|439.0|2.2|0.64|0.12|0.02|0.22|0.14|0.02|Sulphide|Infill|
|JD162|447.0|466.1|19.1|1.16|0.52|0.47|0.11|0.12|0.01|Sulphide|Ext|
|Incl|455.0|463.2|8.2|2.20|1.13|1.07|0.10|0.12|0.01|Sulphide|Ext|
|JD163|68.6|83.0|14.4|0.51|0.11|0.02|0.15|0.05|0.02|Sulphide|Infill|

----- End of picture text -----

20 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 695] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|JD166|234.0|238.0|4.0|0.36|0.87|0.01|0.03|0.02|0.01|Sulphide|Ext|
|JD166|243.0|248.0|5.0|0.58|0.48|0.12|0.06|0.10|0.01|Sulphide|Ext|
|JD166|325.0|339.0|14.0|0.89|0.19|<0.01|0.17|0.09|0.02|Sulphide|Ext|
|Incl|330.0|339.0|9.0|0.96|0.20|<0.01|0.17|0.11|0.02|Sulphide|Ext|
|JD167|10.5|19.4|8.9|1.20|0.33|0.03|0.14|0.12|0.06|Oxide|Infill|
|Incl|13.0|19.4|6.4|1.44|0.42|0.03|0.17|0.15|0.07|Oxide|Infill|
|JD167|24.5|37.6|13.1|0.75|0.22|<0.01|0.18|0.06|0.02|Oxide|Infill|
|JD167|137.0|174.0|37.0|0.90|0.20|0.06|0.16|0.14|0.02|Sulphide|Ext|
|Incl|157.0|162.0|5.0|3.29|0.77|0.23|0.27|0.67|0.02|Sulphide|Ext|
|JD168|13.0|26.0|13.0|0.77|0.27|0.01|0.11|0.09|0.05|Oxide|Infill|
|Incl|14.0|16.0|2.0|1.00|0.42|<0.01|0.05|0.10|0.08|Oxide|Infill|
|JD168|38.0|44.0|6.0|0.51|0.12|0.02|0.13|0.06|0.01|Oxide|Infill|
|JD168|49.0|55.4|6.4|0.57|0.14|0.02|0.15|0.04|0.01|Oxide|Infill|
|JD168|91.0|95.0|4.0|0.45|0.08|0.01|0.17|0.02|0.02|Sulphide|Infill|
|JD168|110.0|121.5|11.5|0.50|0.09|<0.01|0.15|0.01|0.01|Sulphide|Infill|
|JD168|123.3|133.0|9.8|0.41|0.09|0.01|0.16|0.05|0.02|Sulphide|Infill|
|JD168|137.7|185.0|47.4|0.64|0.13|0.01|0.14|0.05|0.01|Sulphide|Infill|
|Incl|137.7|140.0|2.4|0.85|0.17|0.01|0.17|0.06|0.02|Sulphide|Infill|
|and|168.0|170.0|2.0|0.80|0.17|0.01|0.18|0.13|0.02|Sulphide|Infill|
|JD168|190.0|194.0|4.0|0.47|0.11|<0.01|0.16|0.04|0.02|Sulphide|Infill|
|JD168|201.0|215.0|14.0|0.51|0.11|0.01|0.13|0.06|0.01|Sulphide|Infill|
|JD168|243.8|249.0|5.2|0.45|0.11|0.02|0.14|0.08|0.02|Sulphide|Infill|
|JD168|262.0|268.0|6.0|0.51|0.10|0.01|0.15|0.08|0.02|Sulphide|Infill|
|JD168|275.0|293.0|18.0|0.58|0.13|0.01|0.16|0.03|0.01|Sulphide|Infill|
|Incl|289.4|293.0|3.6|0.84|0.17|0.01|0.19|0.03|0.01|Sulphide|Infill|
|JD168|298.4|321.0|22.7|0.97|0.15|0.02|0.26|0.16|0.02|Sulphide|Infill|
|Incl|308.1|312.0|3.9|3.08|0.30|0.02|0.94|0.33|0.06|Sulphide|Infill|
|and|317.0|321.0|4.0|0.80|0.16|0.05|0.13|0.38|0.01|Sulphide|Infill|
|JD168|326.4|346.3|19.9|0.61|0.12|0.01|0.16|0.13|0.01|Sulphide|Infill|
|Incl|333.0|336.5|3.5|1.02|0.19|0.01|0.27|0.28|0.02|Sulphide|Infill|
|JD170|97.0|120.0|23.0|0.75|0.16|<0.01|0.17|0.09|0.02|Sulphide|Infill|
|Incl|103.2|120.0|16.9|0.79|0.17|<0.01|0.17|0.10|0.02|Sulphide|Infill|
|JD170|172.0|206.0|34.0|0.56|0.13|<0.01|0.16|0.05|0.01|Sulphide|Infill|
|JD170|275.0|282.0|7.0|0.58|0.12|0.03|0.13|0.03|0.01|Sulphide|Infill|
|JD170|294.0|300.0|6.0|1.01|0.27|0.06|0.21|0.34|0.02|Sulphide|Infill|
|Incl|295.0|300.0|5.0|1.13|0.31|0.07|0.23|0.39|0.03|Sulphide|Infill|
|JD170|304.8|307.0|2.2|1.63|0.23|0.02|0.57|0.61|0.07|Sulphide|Infill|
|JD170|328.0|341.0|13.0|0.47|0.11|0.01|0.17|0.02|0.02|Sulphide|Infill|
|JD171|9.0|36.0|27.0|1.47|0.50|0.13|0.17|0.19|0.03|Oxide|Infill|
|Incl|10.0|33.8|23.8|1.61|0.54|0.13|0.18|0.20|0.04|Oxide|Infill|
|JD171|41.0|45.4|4.4|1.86|0.27|0.10|0.16|0.07|0.01|Oxide|Infill|

----- End of picture text -----

21 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 695] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|JD171|45.4|73.8|28.4|1.00|0.22|0.09|0.14|0.06|0.01|Sulphide|Infill|
|Incl|45.4|48.0|2.6|4.87|0.92|0.38|0.13|0.10|0.02|Sulphide|Infill|
|and|59.0|63.0|4.0|0.96|0.22|0.04|0.13|0.08|0.01|Sulphide|Infill|
|and|71.0|73.0|2.0|1.14|0.31|0.10|0.16|0.12|0.01|Sulphide|Infill|
|JD171|83.9|133.7|49.9|0.89|0.22|0.12|0.16|0.12|0.01|Sulphide|Infill|
|Incl|90.0|101.0|11.0|0.87|0.28|0.04|0.16|0.06|0.01|Sulphide|Infill|
|and|108.0|122.0|14.0|1.40|0.31|0.06|0.20|0.12|0.01|Sulphide|Infill|
|JD171|146.4|154.0|7.6|0.51|0.17|0.12|0.13|0.12|0.01|Sulphide|Infill|
|JD172|80.6|172.0|91.4|0.58|0.14|0.02|0.14|0.11|0.02|Sulphide|Infill|
|Incl|105.0|107.5|2.5|0.58|0.13|0.02|0.24|0.31|0.03|Sulphide|Infill|
|and|111.0|115.0|4.0|0.89|0.27|0.03|0.16|0.15|0.02|Sulphide|Infill|
|and|137.0|150.9|13.9|0.97|0.20|0.02|0.16|0.16|0.02|Sulphide|Infill|
|JD172|207.9|212.9|5.1|0.57|0.12|<0.01|0.16|0.07|0.02|Sulphide|Infill|
|JD172|269.0|276.0|7.0|0.39|0.08|<0.01|0.15|0.06|0.02|Sulphide|Infill|
|JD172|280.0|384.0|104.0|0.70|0.16|0.01|0.17|0.08|0.02|Sulphide|Ext|
|Incl|301.9|305.0|3.1|0.83|0.17|<0.01|0.20|0.04|0.02|Sulphide|Infill|
|and|332.0|334.0|2.0|0.98|0.19|<0.01|0.18|0.03|0.02|Sulphide|Ext|
|and|355.0|367.9|12.9|1.24|0.33|0.02|0.29|0.31|0.02|Sulphide|Ext|
|and|381.4|384.0|2.6|1.73|0.40|0.06|0.13|0.17|0.01|Sulphide|Ext|
|JD172|409.0|474.2|65.2|0.74|0.19|0.05|0.13|0.07|0.01|Sulphide|Ext|
|Incl|422.0|426.0|4.0|0.64|0.10|0.09|0.18|0.15|0.02|Sulphide|Ext|
|and|442.0|465.7|23.7|1.12|0.32|0.04|0.12|0.07|0.01|Sulphide|Ext|
|and|468.0|470.0|2.0|1.48|0.46|0.19|0.11|0.04|0.01|Sulphide|Ext|
|JD173|4.0|42.0|38.0|1.60|0.44|0.10|0.17|0.11|0.02|Oxide|Infill|
|Incl|5.0|39.0|34.0|1.71|0.47|0.11|0.17|0.12|0.02|Oxide|Infill|
|JD173|43.0|77.0|34.0|0.82|0.20|0.03|0.18|0.06|0.01|Sulphide|Infill|
|Incl|43.0|50.0|7.0|1.47|0.33|0.04|0.19|0.07|0.02|Sulphide|Infill|
|and|72.0|76.0|4.0|0.90|0.29|0.04|0.16|0.13|0.01|Sulphide|Infill|
|JD173|91.0|94.4|3.4|1.23|0.19|0.04|0.18|0.06|0.02|Sulphide|Infill|
|JD173|99.8|112.0|12.3|0.77|0.45|0.04|0.16|0.05|0.01|Sulphide|Infill|
|Incl|99.8|102.0|2.3|2.34|0.73|0.06|0.34|0.07|0.03|Sulphide|Infill|
|JD173|120.0|125.0|5.0|0.81|0.24|0.04|0.09|0.05|0.01|Sulphide|Infill|
|JD174|7.0|39.0|32.0|1.37|0.39|0.04|0.20|0.16|0.03|Oxide|Infill|
|Incl|9.0|26.5|17.5|2.04|0.59|0.03|0.20|0.22|0.05|Oxide|Infill|
|and|29.0|31.0|2.0|1.14|0.20|0.10|0.24|0.09|0.02|Oxide|Infill|
|JD174|39.0|59.0|20.0|0.53|0.14|0.01|0.14|0.05|0.01|Sulphide|Infill|
|JD174|63.4|113.3|49.9|0.70|0.16|0.04|0.17|0.13|0.01|Sulphide|Infill|
|Incl|67.0|72.0|5.0|0.86|0.26|0.06|0.16|0.15|0.01|Sulphide|Infill|
|and|89.0|94.0|5.0|0.74|0.16|0.05|0.17|0.15|0.01|Sulphide|Infill|
|and|97.0|113.3|16.3|0.92|0.20|0.04|0.19|0.16|0.02|Sulphide|Infill|
|JD175|9.0|25.0|16.0|0.74|0.04|0.01|0.04|0.06|<0.01|Oxide|Infill|

----- End of picture text -----

22 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 696] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|Incl|11.0|16.8|5.8|1.10|0.05|0.02|0.05|0.08|<0.01|Oxide|Infill|
|JD175|80.7|101.6|20.9|0.69|0.16|0.04|0.15|0.14|0.01|Sulphide|Infill|
|Incl|85.0|89.0|4.0|0.76|0.18|0.04|0.17|0.25|0.02|Sulphide|Infill|
|and|92.0|99.0|7.0|0.87|0.19|0.04|0.16|0.11|0.01|Sulphide|Infill|
|JD176|8.4|22.0|13.6|1.04|0.27|0.01|0.09|0.10|0.03|Oxide|Infill|
|Incl|14.0|19.7|5.7|1.54|0.39|0.01|0.13|0.16|0.06|Oxide|Infill|
|JD176|22.0|32.0|10.0|0.70|0.14|0.02|0.15|0.10|0.02|Sulphide|Infill|
|Incl|23.0|25.0|2.0|0.86|0.17|0.04|0.16|0.14|0.02|Sulphide|Infill|
|and|30.0|32.0|2.0|0.99|0.19|0.02|0.18|0.10|0.02|Sulphide|Infill|
|JD176|37.0|54.0|17.0|0.50|0.12|0.01|0.14|0.04|0.01|Sulphide|Infill|
|JD176|63.0|72.8|9.8|1.03|0.20|0.02|0.17|0.05|0.02|Sulphide|Infill|
|Incl|64.0|72.8|8.8|1.07|0.21|0.02|0.17|0.05|0.02|Sulphide|Infill|
|JD176|142.0|204.0|62.0|0.71|0.13|0.01|0.18|0.11|0.02|Sulphide|Infill|
|Incl|151.3|157.0|5.7|0.76|0.15|0.01|0.20|0.05|0.02|Sulphide|Infill|
|and|165.0|167.0|2.0|1.12|0.21|0.01|0.22|0.07|0.02|Sulphide|Infill|
|and|187.0|196.0|9.0|0.83|0.15|<0.01|0.21|0.07|0.02|Sulphide|Infill|
|JD176|212.0|275.0|63.0|0.57|0.11|0.01|0.15|0.05|0.02|Sulphide|Infill|
|Incl|220.0|224.0|4.0|1.09|0.20|0.01|0.15|0.08|0.01|Sulphide|Infill|
|and|260.0|263.0|3.0|0.83|0.17|0.01|0.17|0.08|0.02|Sulphide|Infill|
|JD176|281.0|302.9|21.9|0.66|0.13|0.02|0.22|0.23|0.02|Sulphide|Infill|
|Incl|281.0|285.0|4.0|0.93|0.06|0.06|0.25|0.98|0.02|Sulphide|Infill|
|JD176|309.0|360.0|51.0|0.58|0.12|0.01|0.16|0.08|0.01|Sulphide|Infill|
|Incl|336.0|339.0|3.0|0.86|0.22|0.01|0.18|0.11|0.02|Sulphide|Infill|
|and|356.0|360.0|4.0|0.62|0.03|0.02|0.18|0.57|0.02|Sulphide|Infill|
|JD176|370.0|386.0|16.0|0.49|0.11|0.01|0.16|0.13|0.01|Sulphide|Infill|
|JD177|9.0|17.0|8.0|1.30|0.39|0.01|0.15|0.10|0.07|Oxide|Infill|
|JD177|21.2|27.0|5.8|1.16|0.25|0.02|0.27|0.14|0.02|Oxide|Infill|
|Incl|22.0|24.0|2.0|2.56|0.20|0.01|0.29|0.14|0.02|Oxide|Infill|
|JD179|277.4|282.0|4.6|0.72|0.17|<0.01|0.18|0.07|0.02|Sulphide|Ext|
|Incl|277.4|280.0|2.6|0.92|0.18|<0.01|0.22|0.05|0.02|Sulphide|Ext|
|JD180|5.0|15.2|10.2|1.57|0.35|0.01|0.19|0.28|0.09|Oxide|Infill|
|Incl|6.9|15.2|8.3|1.89|0.32|0.02|0.23|0.29|0.12|Oxide|Infill|
|JD180|22.0|36.6|14.6|0.60|0.16|0.01|0.16|0.09|0.02|Oxide|Infill|
|JD180|36.6|44.9|8.4|1.67|2.64|0.01|0.50|0.43|0.03|Sulphide|Infill|
|Incl|42.5|44.9|2.5|4.62|8.79|0.03|1.40|1.21|0.07|Sulphide|Infill|
|JD180|53.0|64.0|11.0|1.87|0.44|0.02|1.22|0.25|0.06|Sulphide|Infill|
|Incl|53.0|59.9|6.9|2.48|0.70|0.02|1.92|0.36|0.09|Sulphide|Infill|
|JD180|97.9|112.9|15.0|2.50|0.67|0.02|0.37|0.15|0.03|Sulphide|Infill|
|Incl|97.9|101.0|3.1|2.73|0.63|0.03|0.30|0.26|0.03|Sulphide|Infill|
|and|104.0|112.9|8.9|3.14|0.86|0.02|0.47|0.17|0.03|Sulphide|Infill|
|JD180|156.6|170.0|13.4|1.43|0.25|0.01|0.27|0.11|0.03|Sulphide|Infill|

----- End of picture text -----

23 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 696] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|Incl|156.6|160.8|4.2|3.33|0.55|0.01|0.48|0.20|0.04|Sulphide|Infill|
|and|164.0|169.0|5.0|0.73|0.15|0.01|0.21|0.09|0.02|Sulphide|Infill|
|JD180|182.0|188.6|6.6|0.45|0.15|0.01|0.14|0.03|0.01|Sulphide|Infill|
|JD181|375.1|400.0|24.9|0.48|0.12|<0.01|0.17|0.07|0.02|Sulphide|Ext|
|Incl|385.6|391.0|5.4|0.83|0.21|<0.01|0.22|0.17|0.02|Sulphide|Ext|
|JD181|405.0|409.2|4.2|0.70|0.16|0.01|0.17|0.03|0.02|Sulphide|Ext|
|JD181|415.0|434.0|19.0|0.61|0.13|0.01|0.17|0.10|0.02|Sulphide|Ext|
|Incl|424.0|428.0|4.0|1.12|0.19|0.01|0.20|0.25|0.02|Sulphide|Ext|
|JD181|445.0|489.5|44.5|0.78|0.15|0.04|0.19|0.25|0.02|Sulphide|Ext|
|Incl|445.0|470.0|25.0|0.88|0.17|0.02|0.21|0.23|0.02|Sulphide|Ext|
|and|473.0|479.0|6.0|0.63|0.12|0.04|0.19|0.32|0.02|Sulphide|Ext|
|and|483.0|489.5|6.5|0.83|0.17|0.12|0.15|0.49|0.01|Sulphide|Ext|
|JD181|495.8|507.2|11.4|0.87|0.14|0.29|0.12|0.35|0.01|Sulphide|Ext|
|Incl|499.0|507.2|8.2|1.09|0.18|0.36|0.13|0.43|0.01|Sulphide|Ext|
|JD211|139.2|141.2|2.0|1.79|0.23|0.01|0.63|0.49|0.06|Sulphide|Ext|
|JRC028D|264.0|270.3|6.3|2.18|0.60|0.10|0.13|0.04|0.01|Sulphide|Ext|
|JRC028D|280.9|283.1|2.2|3.93|2.88|1.41|0.12|0.11|0.01|Sulphide|Ext|
|JRC087D|271.1|277.0|5.9|0.45|0.24|0.02|0.15|0.06|0.01|Sulphide|Ext|
|JRC087D|294.0|305.9|11.9|1.22|0.45|0.03|0.15|0.04|0.01|Sulphide|Ext|
|Incl|296.0|298.0|2.0|1.10|0.20|0.02|0.20|0.08|0.02|Sulphide|Ext|
|JRC087D|327.6|330.0|2.4|2.57|1.57|0.17|0.08|0.04|0.01|Sulphide|Ext|
|JRC109D|251.0|273.0|22.0|1.08|0.29|0.03|0.14|0.05|0.01|Sulphide|Infill|
|JRC109D|281.0|293.0|12.0|0.45|0.11|0.04|0.14|0.08|0.01|Sulphide|Infill|
|JRC209D|264.4|283.0|18.6|1.00|0.27|0.03|0.14|0.05|0.01|Sulphide|Infill|
|Incl|267.0|272.0|5.0|1.64|0.42|0.03|0.14|0.04|0.01|Sulphide|Infill|
|JRC209D|288.0|302.0|14.0|0.60|0.12|0.07|0.12|0.07|0.01|Sulphide|Infill|
|Incl|294.0|296.0|2.0|0.97|0.18|0.25|0.15|0.21|0.01|Sulphide|Infill|
|JRC272D|356.0|396.6|40.6|0.91|0.22|0.09|0.17|0.14|0.02|Sulphide|Ext|
|JRC272D|406.0|435.3|29.3|0.44|0.12|0.02|0.13|0.05|0.01|Sulphide|Ext|
|JRC274D|182.0|186.0|4.0|0.46|0.09|0.01|0.13|0.08|0.02|Sulphide|Infill|
|JRC274D|192.0|222.0|30.0|0.70|0.15|0.01|0.12|0.06|0.01|Sulphide|Infill|
|JRC274D|227.0|260.0|33.0|0.51|0.12|0.01|0.15|0.11|0.01|Sulphide|Infill|
|JRC274D|264.1|268.0|4.0|3.60|0.73|0.03|0.81|0.43|0.06|Sulphide|Infill|
|JRC274D|289.2|297.0|7.8|0.80|0.15|0.01|0.31|0.12|0.02|Sulphide|Infill|
|JRC274D|303.0|308.0|5.0|0.71|0.13|0.02|0.14|0.17|0.01|Sulphide|Infill|
|Incl|304.0|306.2|2.2|0.84|0.16|0.03|0.18|0.27|0.01|Sulphide|Infill|
|JRC274D|324.0|330.0|6.0|0.50|0.10|<0.01|0.16|0.08|0.02|Sulphide|Infill|
|JRC274D|335.0|359.0|24.0|0.46|0.10|0.01|0.14|0.09|0.02|Sulphide|Infill|
|JRC274D|365.5|378.0|12.5|0.61|0.13|0.04|0.11|0.15|0.01|Sulphide|Infill|
|Incl|369.0|373.0|4.0|1.23|0.25|0.09|0.15|0.28|0.01|Sulphide|Infill|
|JRC274D|384.0|400.0|16.0|0.59|0.12|0.01|0.17|0.03|0.01|Sulphide|Infill|

----- End of picture text -----

24 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 696] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|JRC274D|408.0|418.1|10.1|0.58|0.11|0.03|0.18|0.11|0.02|Sulphide|Infill|
|JRC274D|425.0|433.0|8.0|0.48|0.11|0.01|0.15|0.03|0.01|Sulphide|Infill|
|JRC274D|453.6|458.0|4.4|0.45|0.10|0.01|0.19|0.06|0.02|Sulphide|Infill|
|JRC274D|497.3|521.0|23.7|0.58|0.11|0.02|0.13|0.07|0.01|Sulphide|Ext|
|Incl|516.0|519.0|3.0|1.72|0.18|0.04|0.15|0.04|0.02|Sulphide|Ext|
|JRC345D|272.0|305.0|33.0|0.90|0.21|0.03|0.20|0.08|0.02|Sulphide|Infill|
|Incl|295.0|298.0|3.0|1.02|0.15|0.02|0.17|0.05|0.02|Sulphide|Infill|
|JRC345D|324.8|365.0|40.2|0.62|0.12|0.02|0.16|0.08|0.02|Sulphide|Ext|
|Incl|349.0|352.0|3.0|0.84|0.14|0.01|0.20|0.12|0.02|Sulphide|Ext|
|and|358.0|360.0|2.0|1.80|0.34|0.05|0.18|0.08|0.02|Sulphide|Ext|
|JRC366|135.0|141.0|6.0|1.11|0.56|0.05|0.16|0.10|0.01|Sulphide|Ext|
|JRC367|185.0|195.0|10.0|0.72|0.29|0.03|0.08|0.02|0.01|Sulphide|Ext|
|JRC367|210.0|216.0|6.0|0.84|0.29|0.03|0.15|0.14|0.02|Sulphide|Ext|
|Incl|211.0|216.0|5.0|0.89|0.31|0.03|0.15|0.15|0.02|Sulphide|Ext|
|JRC368|206.0|225.0|19.0|0.40|0.89|0.04|0.04|0.05|0.01|Sulphide|Ext|
|Incl|214.0|216.0|2.0|1.40|3.76|0.05|0.04|0.02|0.01|Sulphide|Ext|
|JRC368|237.0|239.0|2.0|2.57|0.92|0.06|0.27|0.11|0.02|Sulphide|Ext|
|JRC368|249.0|251.0|2.0|1.80|0.49|0.08|0.19|0.10|0.02|Sulphide|Ext|
|JRC372|35.0|37.0|2.0|5.45|0.94|0.02|0.24|0.23|0.02|Oxide|Infill|
|JRC372|43.0|115.0|72.0|0.72|0.15|0.01|0.17|0.06|0.02|Sulphide|Infill|
|Incl|44.0|48.0|4.0|1.13|0.16|0.01|0.31|0.09|0.02|Sulphide|Infill|
|and|90.0|93.0|3.0|5.07|1.17|0.03|0.39|0.17|0.03|Sulphide|Infill|
|and|112.0|115.0|3.0|1.07|0.24|0.02|0.21|0.07|0.02|Sulphide|Infill|
|JRC372|123.0|146.0|23.0|0.69|0.16|0.02|0.17|0.08|0.02|Sulphide|Infill|
|Incl|136.0|142.0|6.0|1.20|0.31|0.04|0.20|0.17|0.02|Sulphide|Infill|
|JRC372|155.0|182.0|27.0|0.73|0.14|0.01|0.14|0.05|0.02|Sulphide|Infill|
|Incl|164.0|166.0|2.0|1.25|0.29|0.01|0.17|0.10|0.02|Sulphide|Infill|
|and|175.0|178.0|3.0|1.60|0.24|0.03|0.19|0.05|0.02|Sulphide|Infill|
|JRC374|14.0|38.0|24.0|0.85|0.17|<0.01|0.12|0.07|0.04|Oxide|Infill|
|Incl|17.0|26.0|9.0|1.37|0.25|0.01|0.10|0.12|0.08|Oxide|Infill|
|JRC374|41.0|48.0|7.0|0.51|0.12|<0.01|0.14|0.02|0.01|Sulphide|Infill|
|JRC374|58.0|95.0|37.0|0.96|0.33|<0.01|0.22|0.08|0.02|Sulphide|Infill|
|Incl|67.0|76.0|9.0|2.11|0.94|0.01|0.41|0.17|0.03|Sulphide|Infill|
|and|86.0|88.0|2.0|1.02|0.25|<0.01|0.19|0.07|0.02|Sulphide|Infill|
|JRC374|107.0|138.0|31.0|0.77|0.12|<0.01|0.18|0.04|0.02|Sulphide|Infill|
|Incl|126.0|128.0|2.0|4.42|0.41|0.01|0.35|0.09|0.03|Sulphide|Infill|
|JRC374|189.0|273.0|84.0|0.82|0.16|0.06|0.15|0.11|0.01|Sulphide|Infill|
|Incl|189.0|191.0|2.0|0.92|0.19|0.03|0.18|0.09|0.02|Sulphide|Infill|
|and|195.0|205.0|10.0|1.46|0.20|0.03|0.15|0.08|0.01|Sulphide|Infill|
|and|209.0|212.0|3.0|1.13|0.57|0.02|0.14|0.08|0.02|Sulphide|Infill|
|and|222.0|230.0|8.0|1.31|0.17|0.02|0.13|0.09|0.01|Sulphide|Infill|

----- End of picture text -----

25 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 696] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|and|233.0|235.0|2.0|1.00|0.22|0.01|0.16|0.10|0.02|Sulphide|Infill|
|and|243.0|264.0|21.0|0.72|0.13|0.16|0.17|0.18|0.01|Sulphide|Infill|
|JRC376|19.0|27.0|8.0|0.67|0.14|0.02|0.10|0.05|0.01|Oxide|Infill|
|Incl|20.0|22.0|2.0|0.93|0.19|0.06|0.08|0.10|0.01|Oxide|Infill|
|JRC376|36.0|77.0|41.0|0.71|0.16|<0.01|0.18|0.10|0.02|Sulphide|Infill|
|Incl|44.0|51.0|7.0|0.94|0.19|<0.01|0.25|0.10|0.02|Sulphide|Infill|
|and|55.0|64.0|9.0|0.92|0.27|<0.01|0.19|0.26|0.02|Sulphide|Infill|
|and|68.0|72.0|4.0|1.03|0.16|<0.01|0.18|0.04|0.02|Sulphide|Infill|
|JRC376|82.0|88.0|6.0|0.63|0.14|<0.01|0.21|0.11|0.02|Sulphide|Infill|
|Incl|83.0|85.0|2.0|0.78|0.17|<0.01|0.33|0.13|0.04|Sulphide|Infill|
|JRC377|138.0|152.0|14.0|0.71|0.17|0.01|0.22|0.20|0.02|Sulphide|Infill|
|Incl|143.0|152.0|9.0|0.84|0.21|0.01|0.25|0.28|0.02|Sulphide|Infill|
|JRC377|160.0|173.0|13.0|0.62|0.12|0.01|0.17|0.04|0.01|Sulphide|Infill|
|JRC380|58.0|75.0|17.0|0.70|0.18|<0.01|0.18|0.05|0.02|Sulphide|Infill|
|Incl|58.0|61.0|3.0|0.83|0.18|0.01|0.23|0.10|0.02|Sulphide|Infill|
|and|67.0|69.0|2.0|1.06|0.18|0.01|0.22|0.01|0.02|Sulphide|Infill|
|and|73.0|75.0|2.0|1.02|0.24|0.01|0.22|0.10|0.02|Sulphide|Infill|
|JRC380|107.0|148.0|41.0|0.64|0.13|<0.01|0.19|0.04|0.02|Sulphide|Infill|
|Incl|109.0|111.0|2.0|1.13|0.16|0.01|0.40|<0.01|0.03|Sulphide|Infill|
|and|124.0|126.0|2.0|0.98|0.17|<0.01|0.30|0.16|0.03|Sulphide|Infill|
|and|130.0|132.0|2.0|1.37|0.40|0.01|0.30|0.12|0.03|Sulphide|Infill|
|JRC380|153.0|192.0|39.0|0.50|0.12|<0.01|0.17|0.05|0.02|Sulphide|Infill|
|Incl|187.0|191.0|4.0|0.66|0.20|<0.01|0.23|0.05|0.02|Sulphide|Infill|
|JRC380|214.0|229.0|15.0|0.76|0.21|<0.01|0.20|0.07|0.02|Sulphide|Infill|
|Incl|214.0|217.0|3.0|1.46|0.42|0.01|0.40|0.15|0.03|Sulphide|Infill|
|JRC380|236.0|329.0|93.0|0.89|0.18|0.10|0.16|0.09|0.02|Sulphide|Infill|
|Incl|236.0|242.0|6.0|1.65|0.37|0.01|0.23|0.09|0.02|Sulphide|Infill|
|and|246.0|253.0|7.0|0.91|0.24|<0.01|0.23|0.07|0.02|Sulphide|Infill|
|and|282.0|292.0|10.0|1.86|0.33|0.07|0.19|0.25|0.02|Sulphide|Infill|
|and|312.0|329.0|17.0|0.90|0.16|0.49|0.14|0.13|0.01|Sulphide|Infill|
|JRC383|54.0|63.0|9.0|0.82|0.22|0.01|0.15|0.07|0.01|Oxide|Infill|
|Incl|58.0|62.0|4.0|1.07|0.25|0.01|0.17|0.09|0.01|Oxide|Infill|
|JRC383|63.0|94.0|31.0|0.76|0.15|0.01|0.19|0.07|0.02|Sulphide|Infill|
|Incl|63.0|72.0|9.0|1.17|0.24|0.01|0.24|0.20|0.03|Sulphide|Infill|
|JRC383|99.0|109.0|10.0|1.60|0.45|0.01|0.47|0.09|0.06|Sulphide|Infill|
|Incl|99.0|107.0|8.0|1.85|0.52|0.01|0.56|0.11|0.07|Sulphide|Infill|
|JRC383|165.0|187.0|22.0|0.75|0.23|<0.01|0.28|0.09|0.02|Sulphide|Infill|
|Incl|180.0|187.0|7.0|1.43|0.52|0.01|0.53|0.18|0.04|Sulphide|Infill|
|JRC383|215.0|298.0|83.0|0.87|0.18|0.04|0.16|0.08|0.02|Sulphide|Infill|
|Incl|219.0|221.0|2.0|1.19|0.28|0.04|0.13|0.16|0.01|Sulphide|Infill|
|and|227.0|244.0|17.0|1.09|0.27|0.01|0.20|0.09|0.02|Sulphide|Infill|

----- End of picture text -----

26 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 696] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|and|251.0|256.0|5.0|2.34|0.41|0.04|0.39|0.14|0.03|Sulphide|Infill|
|and|262.0|264.0|2.0|0.66|0.14|0.04|0.15|0.18|0.02|Sulphide|Infill|
|and|287.0|294.0|7.0|1.95|0.34|0.23|0.16|0.08|0.01|Sulphide|Infill|
|JRC384|6.0|11.0|5.0|0.68|0.06|0.06|0.04|0.10|<0.01|Oxide|Ext|
|Incl|7.0|9.0|2.0|0.96|0.06|0.08|0.03|0.09|<0.01|Oxide|Ext|
|JRC388|17.0|24.0|7.0|1.02|0.35|0.01|0.10|0.14|0.08|Oxide|Infill|
|Incl|18.0|22.0|4.0|1.18|0.46|0.01|0.11|0.16|0.09|Oxide|Infill|
|JRC388|29.0|34.0|5.0|0.92|0.17|0.01|0.21|0.28|0.02|Oxide|Infill|
|JRC388|48.0|60.0|12.0|0.58|0.12|<0.01|0.19|0.11|0.02|Oxide|Infill|
|JRC388|60.0|81.0|21.0|0.50|0.10|<0.01|0.15|0.03|0.01|Sulphide|Infill|
|JRC388|86.0|112.0|26.0|0.53|0.11|<0.01|0.14|0.05|0.01|Sulphide|Infill|
|Incl|99.0|104.0|5.0|0.76|0.17|<0.01|0.17|0.08|0.02|Sulphide|Infill|
|JRC388|150.0|170.0|20.0|0.48|0.10|0.01|0.15|0.08|0.02|Sulphide|Infill|
|Incl|152.0|154.0|2.0|0.64|0.13|0.01|0.18|0.22|0.02|Sulphide|Infill|
|JRC388|187.0|204.0|17.0|0.64|0.12|0.01|0.15|0.04|0.02|Sulphide|Infill|
|JRC388|216.0|278.0|62.0|0.56|0.13|0.06|0.15|0.10|0.01|Sulphide|Ext|
|Incl|217.0|219.0|2.0|1.39|0.42|0.05|0.16|0.14|0.02|Sulphide|Infill|
|and|273.0|276.0|3.0|0.85|0.18|0.02|0.15|0.08|0.01|Sulphide|Ext|
|JRC389|137.0|141.0|4.0|0.60|0.13|0.02|0.13|0.06|0.01|Sulphide|Infill|
|JRC389|202.0|236.0|34.0|0.46|0.08|0.01|0.17|0.08|0.02|Sulphide|Ext|
|Incl|219.0|221.0|2.0|0.83|0.11|0.01|0.29|0.13|0.03|Sulphide|Ext|
|JRC390|117.0|125.0|8.0|0.53|0.23|0.02|0.09|0.07|0.01|Sulphide|Ext|
|JRC391|11.0|15.0|4.0|0.66|0.13|0.01|0.08|0.07|0.01|Oxide|Infill|
|JRC391|27.0|35.0|8.0|0.69|0.14|0.01|0.21|0.13|0.02|Sulphide|Infill|
|Incl|28.0|31.0|3.0|0.85|0.17|0.01|0.28|0.17|0.03|Sulphide|Infill|
|JRC391|46.0|55.0|9.0|0.85|0.15|0.01|0.28|0.11|0.03|Sulphide|Infill|
|Incl|48.0|52.0|4.0|1.23|0.20|0.02|0.42|0.17|0.04|Sulphide|Infill|
|JRC391|82.0|120.0|38.0|0.71|0.16|0.01|0.14|0.08|0.01|Sulphide|Infill|
|Incl|84.0|87.0|3.0|1.63|0.33|0.04|0.18|0.15|0.02|Sulphide|Infill|
|and|104.0|116.0|12.0|0.91|0.20|0.01|0.17|0.08|0.02|Sulphide|Infill|
|JRC391|134.0|151.0|17.0|0.73|0.15|<0.01|0.14|0.05|0.01|Sulphide|Infill|
|Incl|136.0|142.0|6.0|1.21|0.21|<0.01|0.19|0.07|0.02|Sulphide|Infill|
|JRC391|157.0|189.0|32.0|0.52|0.10|<0.01|0.16|0.09|0.02|Sulphide|Ext|
|Incl|170.0|174.0|4.0|1.00|0.18|<0.01|0.21|0.06|0.02|Sulphide|Ext|
|and|180.0|182.0|2.0|0.53|0.14|0.01|0.21|0.19|0.02|Sulphide|Ext|
|JRC392|68.0|72.0|4.0|1.66|0.22|0.01|0.52|0.44|0.04|Sulphide|Ext|
|Incl|68.0|71.0|3.0|2.04|0.26|0.01|0.63|0.54|0.05|Sulphide|Ext|
|JRC393|10.0|28.0|18.0|0.92|0.22|0.02|0.08|0.10|0.01|Oxide|Infill|
|Incl|11.0|16.0|5.0|1.44|0.19|0.04|0.07|0.13|0.01|Oxide|Infill|
|and|19.0|21.0|2.0|1.09|0.36|0.02|0.07|0.06|0.02|Oxide|Infill|
|JRC393|28.0|58.0|30.0|0.62|0.17|0.01|0.16|0.12|0.02|Sulphide|Infill|

----- End of picture text -----

27 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 695] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|Incl|35.0|45.0|10.0|0.84|0.29|0.02|0.22|0.21|0.03|Sulphide|Infill|
|and|49.0|51.0|2.0|0.92|0.13|0.01|0.29|0.17|0.03|Sulphide|Infill|
|JRC393|64.0|76.0|12.0|0.47|0.09|0.01|0.15|0.08|0.02|Sulphide|Infill|
|JRC393|88.0|136.0|48.0|0.60|0.12|<0.01|0.17|0.07|0.02|Sulphide|Infill|
|Incl|91.0|93.0|2.0|0.83|0.12|<0.01|0.40|0.17|0.05|Sulphide|Infill|
|JRC395|86.0|100.0|14.0|0.47|0.09|<0.01|0.17|0.07|0.02|Sulphide|Infill|
|Incl|96.0|98.0|2.0|0.56|0.12|<0.01|0.21|0.18|0.02|Sulphide|Infill|
|JRC395|191.0|208.0|17.0|0.58|0.12|0.01|0.13|0.08|0.01|Sulphide|Infill|
|Incl|198.0|203.0|5.0|0.82|0.16|0.01|0.17|0.14|0.02|Sulphide|Infill|
|JRC396|14.0|32.0|18.0|0.95|0.18|0.01|0.10|0.14|0.01|Oxide|Infill|
|Incl|15.0|18.0|3.0|1.69|0.25|0.01|0.08|0.20|0.01|Oxide|Infill|
|and|23.0|26.0|3.0|1.58|0.41|0.01|0.14|0.18|0.02|Oxide|Infill|
|JRC396|34.0|60.0|26.0|0.70|0.14|<0.01|0.19|0.10|0.02|Sulphide|Infill|
|Incl|34.0|38.0|4.0|1.73|0.36|0.01|0.38|0.25|0.04|Sulphide|Infill|
|and|41.0|43.0|2.0|0.86|0.16|<0.01|0.19|0.14|0.02|Sulphide|Infill|
|JRC396|69.0|114.0|45.0|0.64|0.12|0.01|0.16|0.08|0.02|Sulphide|Infill|
|Incl|70.0|74.0|4.0|0.89|0.17|0.01|0.16|0.08|0.02|Sulphide|Infill|
|and|87.0|90.0|3.0|0.89|0.19|0.01|0.14|0.07|0.01|Sulphide|Infill|
|and|91.0|95.0|4.0|0.83|0.16|0.01|0.17|0.06|0.02|Sulphide|Infill|
|and|98.0|100.0|2.0|0.44|0.06|0.01|0.23|0.20|0.03|Sulphide|Infill|
|JRC397|20.0|32.0|12.0|0.81|0.20|<0.01|0.16|0.16|0.02|Oxide|Infill|
|Incl|23.0|27.0|4.0|1.01|0.31|0.01|0.18|0.19|0.02|Oxide|Infill|
|JRC399|9.0|36.0|27.0|0.66|0.24|0.03|0.20|0.19|0.03|Oxide|Infill|
|JRC399|46.0|85.0|39.0|0.66|0.19|<0.01|0.19|0.09|0.02|Sulphide|Infill|
|Incl|65.0|67.0|2.0|1.01|0.14|0.01|0.44|0.19|0.04|Sulphide|Infill|
|and|70.0|72.0|2.0|1.05|0.68|0.01|0.33|0.51|0.02|Sulphide|Infill|
|JRC399|182.0|186.0|4.0|0.93|0.22|0.02|0.15|0.03|0.01|Sulphide|Ext|
|Incl|183.0|185.0|2.0|1.08|0.29|0.02|0.14|0.03|0.01|Sulphide|Ext|
|JRC399|191.0|205.0|14.0|0.99|0.30|0.03|0.14|0.07|0.01|Sulphide|Ext|
|Incl|192.0|195.0|3.0|1.17|0.74|0.02|0.13|0.07|0.02|Sulphide|Ext|
|and|201.0|204.0|3.0|2.00|0.40|0.06|0.18|0.11|0.02|Sulphide|Ext|
|JRC400|131.0|133.0|2.0|0.65|0.16|0.01|0.18|0.17|0.02|Sulphide|Ext|
|JRC400|212.0|214.0|2.0|1.18|0.48|0.06|0.16|0.11|0.01|Sulphide|Ext|
|JRC400|219.0|230.0|11.0|0.91|0.41|0.06|0.10|0.10|0.01|Sulphide|Ext|
|Incl|223.0|225.0|2.0|1.65|0.70|0.08|0.16|0.11|0.01|Sulphide|Ext|
|and|228.0|230.0|2.0|1.34|0.49|0.06|0.16|0.14|0.02|Sulphide|Ext|
|JRC402|4.0|27.0|23.0|0.69|0.18|0.02|0.08|0.08|0.03|Oxide|Infill|
|Incl|10.0|14.0|4.0|1.28|0.38|0.04|0.11|0.14|0.10|Oxide|Infill|
|JRC402|27.0|33.0|6.0|0.94|0.17|0.01|0.20|0.30|0.02|Sulphide|Infill|
|JRC403|9.0|26.0|17.0|1.65|0.51|0.02|0.17|0.24|0.07|Oxide|Infill|
|Incl|10.0|26.0|16.0|1.70|0.49|0.02|0.17|0.25|0.07|Oxide|Infill|

----- End of picture text -----

28 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 696] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|JRC403|38.0|59.0|21.0|0.68|0.14|0.01|0.15|0.11|0.02|Sulphide|Infill|
|Incl|38.0|43.0|5.0|0.96|0.16|0.01|0.18|0.13|0.02|Sulphide|Infill|
|and|53.0|57.0|4.0|0.92|0.21|<0.01|0.17|0.05|0.02|Sulphide|Infill|
|JRC403|82.0|93.0|11.0|0.43|0.09|0.01|0.16|0.04|0.02|Sulphide|Infill|
|JRC403|101.0|125.0|24.0|0.74|0.19|0.13|0.15|0.13|0.02|Sulphide|Ext|
|Incl|107.0|115.0|8.0|1.40|0.39|0.36|0.16|0.31|0.02|Sulphide|Infill|
|JRC405|6.0|14.0|8.0|0.66|0.11|0.01|0.04|0.10|0.02|Oxide|Infill|
|JRC410|6.0|22.0|16.0|1.73|0.62|0.07|0.19|0.26|0.08|Oxide|Infill|
|Incl|7.0|22.0|15.0|1.81|0.65|0.07|0.20|0.27|0.09|Oxide|Infill|
|JRC410|22.0|51.0|29.0|0.74|0.14|<0.01|0.16|0.06|0.02|Sulphide|Infill|
|Incl|22.0|29.0|7.0|1.10|0.22|0.01|0.18|0.09|0.02|Sulphide|Infill|
|and|41.0|44.0|3.0|1.31|0.23|0.01|0.23|0.14|0.02|Sulphide|Infill|
|JRC410|103.0|111.0|8.0|0.69|0.15|0.03|0.14|0.07|0.01|Sulphide|Ext|
|JRC412|14.0|46.0|32.0|1.65|0.63|0.03|0.19|0.15|0.05|Oxide|Infill|
|Incl|17.0|27.0|10.0|1.65|0.52|0.01|0.19|0.18|0.11|Oxide|Infill|
|and|31.0|41.0|10.0|3.02|1.33|0.07|0.30|0.22|0.02|Oxide|Infill|
|JRC412|48.0|70.0|22.0|0.38|0.08|0.02|0.16|0.07|0.01|Sulphide|Infill|
|JRC412|161.0|165.0|4.0|0.03|<0.01|0.22|0.11|0.30|0.03|Sulphide|Infill|
|JRC413|9.0|17.0|8.0|2.01|1.00|0.01|0.13|0.21|0.19|Oxide|Infill|
|Incl|10.0|17.0|7.0|2.19|1.12|0.01|0.14|0.23|0.22|Oxide|Infill|
|JRC414|9.0|25.0|16.0|1.12|0.26|0.02|0.23|0.16|0.02|Oxide|Infill|
|Incl|12.0|24.0|12.0|1.29|0.29|0.02|0.24|0.18|0.02|Oxide|Infill|
|JRC415|6.0|22.0|16.0|1.33|0.50|0.11|0.17|0.27|0.07|Oxide|Infill|
|Incl|7.0|21.0|14.0|1.41|0.51|0.11|0.18|0.29|0.07|Oxide|Infill|
|JRC415|22.0|74.0|52.0|0.90|0.19|0.01|0.16|0.07|0.02|Sulphide|Infill|
|Incl|22.0|26.0|4.0|0.85|0.20|0.04|0.15|0.15|0.02|Sulphide|Infill|
|and|34.0|54.0|20.0|1.33|0.26|<0.01|0.19|0.08|0.02|Sulphide|Infill|
|JRC416|8.0|24.0|16.0|1.62|0.57|0.02|0.15|0.18|0.04|Oxide|Infill|
|Incl|10.0|24.0|14.0|1.77|0.60|0.02|0.17|0.19|0.05|Oxide|Infill|
|JRC416|24.0|57.0|33.0|0.63|0.13|<0.01|0.15|0.08|0.02|Sulphide|Infill|
|Incl|41.0|50.0|9.0|0.80|0.18|<0.01|0.19|0.12|0.02|Sulphide|Infill|
|JRC416|139.0|152.0|13.0|0.75|0.16|0.01|0.16|0.05|0.02|Sulphide|Ext|
|Incl|139.0|145.0|6.0|0.90|0.19|0.01|0.16|0.05|0.02|Sulphide|Ext|
|JRC417|9.0|23.0|14.0|0.58|0.21|0.02|0.09|0.14|0.04|Oxide|Infill|
|JRC417|30.0|66.0|36.0|0.65|0.14|0.01|0.15|0.08|0.02|Sulphide|Infill|
|Incl|38.0|49.0|11.0|0.76|0.18|0.01|0.16|0.11|0.02|Sulphide|Infill|
|JRC418|9.0|29.0|20.0|0.74|0.17|0.05|0.14|0.18|0.02|Oxide|Infill|
|Incl|16.0|19.0|3.0|1.04|0.25|0.04|0.19|0.26|0.05|Oxide|Infill|
|JRC418|29.0|60.0|31.0|0.69|0.16|0.04|0.12|0.13|0.01|Sulphide|Infill|
|Incl|41.0|53.0|12.0|0.76|0.17|0.08|0.13|0.17|0.01|Sulphide|Infill|
|JRC419|87.0|200.0|113.0|0.70|0.14|0.02|0.16|0.09|0.02|Sulphide|Infill|

----- End of picture text -----

29 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 695] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|Incl|127.0|140.0|13.0|1.08|0.22|0.01|0.17|0.10|0.02|Sulphide|Infill|
|and|143.0|146.0|3.0|1.05|0.26|0.01|0.19|0.09|0.02|Sulphide|Infill|
|and|164.0|173.0|9.0|0.70|0.12|0.01|0.27|0.15|0.04|Sulphide|Infill|
|and|195.0|197.0|2.0|1.09|0.32|0.05|0.26|0.11|0.02|Sulphide|Ext|
|JRC420|63.0|74.0|11.0|0.75|0.19|0.01|0.16|0.12|0.02|Sulphide|Infill|
|Incl|67.0|74.0|7.0|0.89|0.22|0.01|0.16|0.13|0.02|Sulphide|Infill|
|JRC420|102.0|246.0|144.0|0.61|0.14|0.01|0.15|0.09|0.01|Sulphide|Infill|
|Incl|121.0|123.0|2.0|0.95|0.19|0.01|0.14|0.11|0.01|Sulphide|Infill|
|and|133.0|137.0|4.0|0.74|0.17|0.02|0.14|0.17|0.01|Sulphide|Infill|
|and|162.0|166.0|4.0|0.62|0.12|<0.01|0.18|0.18|0.02|Sulphide|Infill|
|and|168.0|174.0|6.0|0.83|0.16|0.01|0.15|0.12|0.01|Sulphide|Infill|
|and|236.0|239.0|3.0|1.54|0.36|0.05|0.20|0.09|0.02|Sulphide|Ext|
|JRC421|11.0|37.0|26.0|1.30|0.37|0.04|0.15|0.15|0.03|Oxide|Infill|
|Incl|11.0|30.0|19.0|1.55|0.45|0.03|0.14|0.17|0.04|Oxide|Infill|
|JRC421|46.0|147.0|101.0|0.76|0.16|0.04|0.15|0.08|0.01|Sulphide|Infill|
|Incl|60.0|68.0|8.0|1.70|0.26|0.05|0.16|0.11|0.01|Sulphide|Infill|
|and|71.0|76.0|5.0|0.98|0.11|0.07|0.18|0.16|0.02|Sulphide|Infill|
|and|88.0|93.0|5.0|1.30|0.11|0.06|0.18|0.15|0.02|Sulphide|Infill|
|and|125.0|131.0|6.0|1.46|0.50|0.02|0.17|0.05|0.01|Sulphide|Infill|
|JRC422|25.0|36.0|11.0|0.67|0.18|0.01|0.14|0.15|0.02|Oxide|Infill|
|JRC422|47.0|57.0|10.0|0.54|0.13|0.01|0.12|0.09|0.01|Sulphide|Infill|
|JRC422|68.0|140.0|72.0|0.78|0.19|0.01|0.17|0.14|0.02|Sulphide|Infill|
|Incl|68.0|88.0|20.0|1.22|0.35|0.01|0.20|0.26|0.02|Sulphide|Infill|
|and|92.0|99.0|7.0|0.86|0.17|0.01|0.17|0.14|0.01|Sulphide|Infill|
|and|122.0|129.0|7.0|0.85|0.16|0.01|0.24|0.15|0.02|Sulphide|Infill|
|JRC423|37.0|53.0|16.0|0.43|0.12|0.01|0.13|0.12|0.02|Sulphide|Infill|
|JRC423|58.0|176.0|118.0|0.71|0.15|0.02|0.14|0.11|0.01|Sulphide|Infill|
|Incl|74.0|76.0|2.0|0.98|0.24|0.02|0.13|0.06|0.01|Sulphide|Infill|
|and|79.0|93.0|14.0|0.92|0.20|0.04|0.13|0.13|0.01|Sulphide|Infill|
|and|97.0|103.0|6.0|0.81|0.17|0.03|0.14|0.13|0.01|Sulphide|Infill|
|and|106.0|128.0|22.0|0.85|0.19|0.03|0.15|0.14|0.01|Sulphide|Infill|
|and|132.0|137.0|5.0|0.91|0.17|0.01|0.16|0.09|0.01|Sulphide|Infill|
|and|155.0|160.0|5.0|1.15|0.19|0.01|0.22|0.17|0.02|Sulphide|Infill|
|JRC423|181.0|192.0|11.0|0.49|0.11|<0.01|0.13|0.07|0.02|Sulphide|Ext|
|JRC423|217.0|235.0|18.0|1.15|0.28|0.01|0.23|0.17|0.02|Sulphide|Ext|
|Incl|223.0|231.0|8.0|1.98|0.49|0.02|0.32|0.31|0.03|Sulphide|Ext|
|JRC423|241.0|249.0|8.0|0.69|0.12|0.01|0.19|0.09|0.02|Sulphide|Ext|
|Incl|245.0|249.0|4.0|0.70|0.12|0.01|0.20|0.15|0.02|Sulphide|Ext|
|JRC423|276.0|280.0|4.0|0.71|0.13|0.10|0.13|0.06|0.01|Sulphide|Ext|
|JRC424|10.0|26.0|16.0|0.73|0.23|0.03|0.10|0.17|0.03|Oxide|Infill|
|Incl|12.0|16.0|4.0|0.95|0.27|0.02|0.09|0.26|0.03|Oxide|Infill|

----- End of picture text -----

30 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 695] intentionally omitted <==

----- Start of picture text -----

|||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|From|To|Interval|Pd|Pt|Au|Ni|Cu|Co|
|Hole ID|Geology|Type|
|(m)|(m)|(m)|(g/t)|(g/t)|(g/t)|(%)|(%)|(%)|
|JRC424|26.0|35.0|9.0|0.42|0.10|0.01|0.11|0.10|0.01|Sulphide|Infill|
|JRC424|53.0|139.0|86.0|0.62|0.14|0.01|0.14|0.07|0.01|Sulphide|Infill|
|Incl|56.0|58.0|2.0|1.03|0.24|0.02|0.13|0.08|0.01|Sulphide|Infill|
|and|61.0|65.0|4.0|0.85|0.19|0.02|0.14|0.13|0.01|Sulphide|Infill|
|and|71.0|75.0|4.0|0.85|0.21|0.02|0.14|0.11|0.01|Sulphide|Infill|
|and|106.0|110.0|4.0|0.79|0.19|0.12|0.17|0.16|0.02|Sulphide|Infill|
|and|113.0|115.0|2.0|1.83|0.37|0.01|0.17|0.09|0.02|Sulphide|Infill|
|JRC424|156.0|167.0|11.0|0.49|0.10|<0.01|0.15|0.04|0.01|Sulphide|Ext|
|JRC424|234.0|238.0|4.0|0.61|0.19|0.03|0.11|0.02|0.01|Sulphide|Ext|
|JRC425|14.0|19.0|5.0|1.02|0.19|0.01|0.12|0.07|0.01|Oxide|Infill|
|Incl|14.0|18.0|4.0|1.08|0.20|0.02|0.12|0.08|0.01|Oxide|Infill|
|JRC425|21.0|54.0|33.0|0.63|0.12|<0.01|0.17|0.05|0.01|Sulphide|Infill|
|Incl|26.0|31.0|5.0|0.90|0.16|<0.01|0.21|0.05|0.02|Sulphide|Infill|
|JRC425|112.0|123.0|11.0|0.93|0.21|<0.01|0.16|0.07|0.02|Sulphide|Infill|
|Incl|112.0|116.0|4.0|1.67|0.40|<0.01|0.26|0.12|0.02|Sulphide|Infill|
|JRC425|138.0|150.0|12.0|0.94|0.21|0.01|0.15|0.07|0.01|Sulphide|Infill|
|Incl|144.0|148.0|4.0|1.78|0.44|0.01|0.19|0.07|0.02|Sulphide|Infill|
|JRC425|192.0|281.0|89.0|0.54|0.12|0.02|0.13|0.06|0.01|Sulphide|Ext|
|Incl|260.0|262.0|2.0|1.41|0.24|0.04|0.25|0.22|0.02|Sulphide|Ext|
|JRC427|29.0|47.0|18.0|0.50|0.12|0.03|0.11|0.12|0.01|Sulphide|Infill|
|Incl|38.0|41.0|3.0|0.49|0.11|0.14|0.13|0.44|0.02|Sulphide|Infill|
|JRC427|74.0|102.0|28.0|0.67|0.13|0.01|0.16|0.09|0.02|Sulphide|Infill|
|Incl|74.0|86.0|12.0|0.93|0.18|0.01|0.14|0.10|0.02|Sulphide|Infill|
|and|89.0|91.0|2.0|0.46|0.11|0.01|0.22|0.20|0.03|Sulphide|Infill|
|JRC427|123.0|127.0|4.0|1.83|0.44|<0.01|0.37|0.13|0.03|Sulphide|Infill|
|JRC427|168.0|177.0|9.0|1.45|0.14|<0.01|0.25|0.07|0.02|Sulphide|Infill|
|Incl|168.0|173.0|5.0|2.11|0.17|<0.01|0.29|0.11|0.03|Sulphide|Infill|
|JRC427|205.0|209.0|4.0|0.56|0.11|<0.01|0.19|0.01|0.02|Sulphide|Infill|
|JRC427|235.0|261.0|26.0|0.75|0.15|0.01|0.15|0.07|0.02|Sulphide|Infill|
|Incl|252.0|260.0|8.0|1.01|0.26|0.01|0.17|0.09|0.02|Sulphide|Infill|
|JRC427|266.0|271.0|5.0|0.62|0.12|0.01|0.14|0.06|0.01|Sulphide|Ext|
|JRC428|68.0|71.0|3.0|0.98|0.17|0.01|0.15|0.13|0.02|Sulphide|Infill|
|JRC428|157.0|162.0|5.0|0.56|0.11|<0.01|0.18|0.03|0.01|Sulphide|Infill|
|JRC430|11.0|17.0|6.0|0.63|0.06|0.01|0.03|0.04|<0.01|Oxide|Ext|
|JRC431|164.0|176.0|12.0|1.23|0.26|<0.01|0.27|0.07|0.02|Sulphide|Infill|
|Incl|171.0|176.0|5.0|2.31|0.47|<0.01|0.47|0.07|0.04|Sulphide|Infill|
|JRC431|225.0|229.0|4.0|0.79|0.57|0.01|0.13|0.31|0.01|Sulphide|Infill|
|Incl|226.0|229.0|3.0|0.89|0.60|0.01|0.15|0.34|0.01|Sulphide|Infill|
|JRC432|8.0|14.0|6.0|0.73|0.16|0.02|0.04|0.07|0.07|Oxide|Ext|
|Incl|12.0|14.0|2.0|1.12|0.28|0.04|0.05|0.07|0.10|Oxide|Ext|
|JRC433|15.0|39.0|24.0|0.83|0.18|0.02|0.16|0.11|0.02|Oxide|Infill|

----- End of picture text -----

31 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

	From	To	Interval	Pd	Pt	Au	Ni	Cu	Co
Hole ID	(m)	(m)	(m)	(g/t)	(g/t)	(g/t)	(%)	(%)	(%)	Geology	Type
Incl	19.0	29.0	10.0	1.19	0.26	0.03	0.18	0.16	0.02	Oxide	Infill
JRC433	50.0	123.0	73.0	0.61	0.13	<0.01	0.17	0.06	0.02	Sulphide	Infill
Incl	59.0	63.0	4.0	0.74	0.16	0.01	0.27	0.18	0.03	Sulphide	Infill
and	69.0	77.0	8.0	1.06	0.23	<0.01	0.19	0.09	0.02	Sulphide	Infill
and	86.0	88.0	2.0	1.13	0.19	0.01	0.17	0.12	0.02	Sulphide	Infill
JRC433	149.0	175.0	26.0	0.52	0.11	<0.01	0.16	0.06	0.02	Sulphide	Infill
JRC433	180.0	207.0	27.0	0.61	0.12	<0.01	0.17	0.04	0.02	Sulphide	Infill
Incl	185.0	188.0	3.0	1.00	0.18	<0.01	0.23	0.04	0.02	Sulphide	Infill
JRC433	214.0	225.0	11.0	0.48	0.12	<0.01	0.15	0.03	0.01	Sulphide	Infill
JRC433	230.0	261.0	31.0	1.10	0.19	0.02	0.15	0.07	0.02	Sulphide	Infill
Incl	240.0	254.0	14.0	0.87	0.15	0.01	0.17	0.08	0.02	Sulphide	Infill
and	257.0	260.0	3.0	4.47	0.76	0.09	0.16	0.08	0.02	Sulphide	Infill
JRC433	277.0	320.0	43.0	0.78	0.15	0.03	0.13	0.11	0.01	Sulphide	Infill
Incl	295.0	298.0	3.0	1.21	0.25	0.05	0.09	0.33	0.01	Sulphide	Infill
and	301.0	303.0	2.0	2.48	0.13	0.10	0.13	0.21	0.02	Sulphide	Infill
and	309.0	315.0	6.0	1.60	0.30	0.05	0.20	0.16	0.02	Sulphide	Infill
JRC434	79.0	85.0	6.0	0.38	0.10	0.01	0.16	0.07	0.02	Sulphide	Infill
JRC434	102.0	108.0	6.0	0.49	0.12	0.01	0.12	0.09	0.01	Sulphide	Infill
JRC434	127.0	151.0	24.0	0.66	0.16	0.01	0.11	0.09	0.01	Sulphide	Infill
Incl	136.0	138.0	2.0	1.26	0.35	0.01	0.15	0.10	0.02	Sulphide	Infill
and	149.0	151.0	2.0	0.93	0.23	0.01	0.13	0.13	0.01	Sulphide	Infill
JRC434	159.0	180.0	21.0	0.78	0.16	0.01	0.13	0.08	0.01	Sulphide	Infill
Incl	159.0	166.0	7.0	0.91	0.20	<0.01	0.16	0.11	0.02	Sulphide	Infill
and	178.0	180.0	2.0	0.91	0.18	0.01	0.16	0.10	0.02	Sulphide	Infill
JRC434	236.0	241.0	5.0	0.63	0.11	<0.01	0.17	0.03	0.01	Sulphide	Infill
JRC434	247.0	260.0	13.0	0.66	0.14	<0.01	0.16	0.07	0.02	Sulphide	Infill
JRC434	272.0	285.0	13.0	0.47	0.13	<0.01	0.16	0.06	0.02	Sulphide	Infill
JRC434	290.0	321.0	31.0	2.11	0.62	0.03	0.54	0.34	0.04	Sulphide	Infill
Incl	301.0	316.0	15.0	3.86	1.17	0.04	0.95	0.63	0.06	Sulphide	Infill
JRC435	21.0	25.0	4.0	0.66	0.24	0.09	0.14	0.13	0.03	Oxide	Infill
JRC435	33.0	37.0	4.0	0.59	0.15	0.02	0.12	0.13	0.01	Oxide	Infill
JRC435	37.0	52.0	15.0	0.58	0.15	0.01	0.11	0.10	0.01	Sulphide	Infill
Incl	41.0	44.0	3.0	0.76	0.18	0.02	0.14	0.15	0.02	Sulphide	Infill
JRC435	56.0	65.0	9.0	0.69	0.15	0.01	0.16	0.06	0.02	Sulphide	Infill
Incl	61.0	63.0	2.0	0.94	0.17	0.02	0.16	0.04	0.01	Sulphide	Infill

Ext = Intersection outside Resource pit shell. Infill = Intersection within Resource pit shell

32 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

Table 2. New drill hole survey data and assaying status.

==> picture [483 x 663] intentionally omitted <==

----- Start of picture text -----

|||||||||||
|---|---|---|---|---|---|---|---|---|---|
|Easting|Northing|RL|Depth|Survey|Azi|Dip|
|Hole ID|Type|Assay status|
|(m)|(m)|(m)|(m)|type|(°)|(°)|
|JD133|Core|424807.1|6512430.7|240.2|390.7|GPS-RTK|93.1|-59.7|Reported|
|JD134|Core|424811.7|6512476.8|242.0|456.7|GPS-RTK|91.7|-58.3|Reported|
|JD135|Core|425643.8|6513073.8|248.9|207.4|GPS-RTK|89.5|-59.1|Reported|
|JD136|Core|425640.1|6512999.8|249.4|243.4|GPS-RTK|89.7|-59.9|Reported|
|JD137|Core|424772.8|6512428.2|239.8|651.5|GPS-RTK|91.5|-59.7|Reported|
|JD138|Core|425631.2|6512917.7|249.2|222.4|GPS-RTK|89.4|-59.0|Reported|
|JD139|Core|425631.3|6512962.6|250.1|249.3|GPS-RTK|91.8|-59.3|Reported|
|JD140|Core|425556.7|6512962.4|254.9|300.4|GPS-RTK|89.9|-59.2|Reported|
|JD141|Core|424942.4|6512559.1|244.2|362.8|GPS-RTK|90.0|-59.6|Reported|
|JD142|Core|424753.2|6512510.0|243.4|642.0|GPS-RTK|90.0|-60.0|Reported|
|JD143|Core|425593.1|6512967.2|253.3|279.4|GPS-RTK|91.0|-66.2|Reported|
|JD144|Core|425629.0|6513034.3|249.8|249.4|GPS-RTK|89.1|-59.4|Reported|
|JD145|Core|424816.9|6512551.3|246.0|447.8|GPS-RTK|89.5|-59.7|Reported|
|JD146|Core|425637.8|6513115.6|248.8|204.4|GPS-RTK|89.3|-60.0|Reported|
|JD147|Core|425669.8|6513089.8|247.4|180.4|GPS-RTK|90.0|-60.0|Reported|
|JD148|Core|425719.0|6513083.7|247.1|120.4|GPS-RTK|89.6|-58.4|Reported - NSA|
|JD149|Core|425759.1|6513080.3|246.6|120.5|GPS-RTK|90.6|-60.1|Reported - NSA|
|JD150|Core|424938.8|6512470.2|239.8|345.5|GPS-RTK|87.2|-60.3|Reported|
|JD151|Core|425755.6|6512989.6|246.3|144.4|GPS-RTK|91.0|-60.5|Reported - NSA|
|JD152|Core|425707.0|6513008.0|247.0|150.3|GPS-RTK|93.7|-58.9|Reported - NSA|
|JD153|Core|425675.8|6512998.6|247.5|177.4|GPS-RTK|96.6|-55.3|Reported|
|JD154|Core|425806.6|6513076.7|245.3|120.5|GPS-RTK|91.9|-60.2|Reported - NSA|
|JD155|Core|425799.7|6512993.3|245.4|120.5|GPS-RTK|89.1|-60.1|Reported - NSA|
|JD156|Core|424811.6|6512505.6|243.4|450.3|GPS-RTK|93.4|-60.2|Reported|
|JD157|Core|424705.4|6512797.2|254.5|776.5|GPS-RTK|89.2|-62.4|Reported|
|JD158|Core|424936.7|6512427.3|237.8|270.6|GPS-RTK|127.4|-59.7|Reported|
|JD159|Core|424848.2|6512520.6|243.1|381.7|GPS-RTK|89.1|-62.0|Reported|
|JD160|Core|425667.8|6512922.1|247.3|174.3|GPS-RTK|89.4|-60.0|Reported|
|JD161|Core|425580.0|6512821.2|249.2|248.4|GPS-RTK|89.4|-60.5|Reported|
|JD162|Core|424936.5|6512395.7|236.4|489.2|GPS-RTK|87.6|-60.7|Reported|
|JD163|Core|425710.7|6512921.1|246.3|147.4|GPS-RTK|89.8|-60.4|Reported|
|JD164|Core|425755.1|6512919.8|245.5|120.4|GPS-RTK|90.9|-60.4|Reported - NSA|
|JD165|Core|425802.9|6512920.4|245.5|120.4|GPS-RTK|90.9|-60.4|Reported - NSA|
|JD166|Core|425086.4|6513519.5|263.2|339.6|GPS-RTK|87.6|-61.0|Reported|
|JD167|Core|425566.5|6513198.5|248.6|240.9|GPS-RTK|88.2|-60.3|Reported|
|JD168|Core|424883.2|6512504.2|241.2|367.8|GPS-RTK|95.5|-60.2|Reported|
|JD169|Core|425785.8|6512858.8|245.6|171.4|GPS-RTK|90.8|-60.0|Reported|
|JD170|Core|424872.9|6512399.6|238.0|352.0|GPS-RTK|89.7|-56.5|Reported|
|JD171|Core|425665.1|6512819.5|247.5|222.4|GPS-RTK|90.2|-60.7|Reported|

----- End of picture text -----

33 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 696] intentionally omitted <==

----- Start of picture text -----

|||||||||||
|---|---|---|---|---|---|---|---|---|---|
|Easting|Northing|RL|Depth|Survey|Azi|Dip|
|Hole ID|Type|Assay status|
|(m)|(m)|(m)|(m)|type|(°)|(°)|
|JD172|Core|425221.9|6513079.2|262.1|577.0|GPS-RTK|90.6|-56.7|Reported|
|JD173|Core|425683.7|6512784.5|247.9|147.4|GPS-RTK|119.6|-66.7|Reported|
|JD174|Core|425680.9|6512851.0|246.9|180.0|GPS-RTK|91.0|-60.3|Reported|
|JD175|Core|425707.0|6512864.2|246.4|168.4|GPS-RTK|86.6|-60.6|Reported|
|JD176|Core|424863.0|6512472.6|240.4|435.2|GPS-RTK|87.2|-60.1|Reported|
|JD177|Core|425675.9|6513115.8|247.2|144.4|GPS-RTK|89.8|-60.5|Reported|
|JD178|Core|425713.4|6513111.1|247.2|135.4|GPS-RTK|85.1|-60.4|Reported|
|JD179|Core|425080.0|6513031.7|266.0|300.9|GPS-RTK|88.9|-60.2|Reported|
|JD180|Core|424979.5|6512276.2|233.9|236.3|GPS-RTK|92.1|-60.2|Reported|
|JD181|Core|424861.5|6512320.9|235.0|577.3|GPS-RTK|92.5|-69.5|Reported|
|JD211|Core|424800.0|6513585.0|273.6|273.4|GPS-RTK|90.4|-60.7|Reported|
|JRC028D|RC-Core|425298.8|6512517.6|241.8|354.8|GPS-RTK|93.1|-59.3|RC previously reported|
|JRC087D|RC-Core|425257.1|6512507.7|241.9|357.8|GPS-RTK|94.1|-58.6|RC previously reported|
|JRC109D|RC-Core|425318.3|6512706.4|249.3|384.8|GPS-RTK|89.2|-60.5|RC previously reported|
|JRC115D|RC-Core|425396.5|6512701.7|250.9|319.0|GPS-RTK|89.3|-60.8|RC previously reported|
|JRC209D|RC-Core|425257.9|6512562.4|244.1|350.0|GPS-RTK|93.3|-59.7|RC previously reported|
|JRC272D|RC-Core|425327.2|6512997.5|262.6|471.7|GPS-RTK|91.0|-60.1|RC previously reported|
|JRC274D|RC-Core|424982.7|6512652.6|248.5|606.6|GPS-RTK|90.0|-60.3|RC previously reported|
|JRC345D|RC-Core|425407.8|6512998.2|260.2|390.7|GPS-RTK|88.8|-60.4|RC previously reported|
|JRC366|RC|425209.5|6513439.9|259.8|177.0|GPS-RTK|89.3|-60.3|Previously reported|
|JRC367|RC|425131.2|6513441.6|263.3|249.0|GPS-RTK|90.8|-60.4|Previously reported|
|JRC368|RC|425064.4|6513438.8|267.5|255.0|GPS-RTK|89.7|-63.4|Reported|
|JRC369|RC|425043.0|6513590.6|264.7|252.0|GPS-RTK|93.0|-60.7|Reported - NSA|
|JRC370|RC|424982.1|6513444.2|270.3|249.0|GPS-RTK|89.6|-63.6|Reported - NSA|
|JRC371|RC|425007.4|6513591.4|266.6|267.0|GPS-RTK|91.9|-60.3|Reported - NSA|
|JRC372|RC|425513.7|6512959.1|255.4|320.0|GPS-RTK|91.6|-60.5|Reported|
|JRC373|RC|424964.2|6513592.4|268.9|307.0|GPS-RTK|89.8|-60.2|Reported - NSA|
|JRC374|RC|425474.0|6512958.1|256.9|273.0|GPS-RTK|92.5|-60.1|Reported|
|JRC375|RC|425679.4|6513601.9|248.2|153.0|GPS-RTK|90.5|-60.2|Reported - NSA|
|JRC376|RC|425433.2|6512957.2|259.5|225.0|GPS-RTK|92.7|-60.8|Reported|
|JRC377|RC|425397.9|6512955.9|261.0|213.0|GPS-RTK|91.3|-60.6|Reported|
|JRC378|RC|425755.7|6513602.2|247.9|150.0|GPS-RTK|91.5|-60.4|Reported - NSA|
|JRC379|RC|425836.2|6513606.0|247.8|153.0|GPS-RTK|90.2|-59.9|Reported - NSA|
|JRC380|RC|425315.9|6512955.2|263.1|336.0|GPS-RTK|93.2|-59.8|Reported|
|JRC381|RC|425758.6|6512597.4|243.3|120.0|GPS-RTK|88.6|-60.1|Reported|
|JRC382|RC|425797.8|6512598.5|243.8|120.0|GPS-RTK|91.8|-59.7|Reported|
|JRC383|RC|425351.8|6512958.2|262.6|303.0|GPS-RTK|94.3|-59.9|Reported|
|JRC384|RC|425758.5|6512560.1|243.0|120.0|GPS-RTK|89.9|-59.9|Reported|
|JRC385|RC|425797.2|6512559.6|242.9|120.0|GPS-RTK|89.8|-60.0|Reported - NSA|
|JRC386|RC|425915.7|6513607.9|247.0|150.0|GPS-RTK|90.1|-60.2|Reported - NSA|
|JRC387|RC|425990.9|6513609.5|245.6|150.0|GPS-RTK|87.8|-61.1|Reported - NSA|

----- End of picture text -----

34 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

==> picture [483 x 696] intentionally omitted <==

----- Start of picture text -----

|||||||||||
|---|---|---|---|---|---|---|---|---|---|
|Easting|Northing|RL|Depth|Survey|Azi|Dip|
|Hole ID|Type|Assay status|
|(m)|(m)|(m)|(m)|type|(°)|(°)|
|JRC388|RC|425524.0|6513035.3|254.9|315.0|GPS-RTK|91.8|-60.5|Reported|
|JRC389|RC|425452.4|6513553.9|251.2|300.0|GPS-RTK|88.1|-59.7|Reported|
|JRC390|RC|424924.5|6513593.0|269.5|246.0|GPS-RTK|91.8|-59.7|Reported|
|JRC391|RC|425490.6|6513553.6|250.3|250.0|GPS-RTK|89.6|-59.6|Reported|
|JRC392|RC|424869.5|6513597.5|272.1|252.0|GPS-RTK|89.7|-57.5|Reported|
|JRC393|RC|425533.2|6513555.0|249.0|207.0|GPS-RTK|89.5|-59.7|Reported|
|JRC394|RC|424903.0|6513437.6|269.6|204.0|GPS-RTK|88.0|-59.8|Reported|
|JRC395|RC|425482.5|6513034.3|256.4|321.0|GPS-RTK|91.4|-60.4|Reported|
|JRC396|RC|425563.7|6513556.7|248.3|150.0|GPS-RTK|90.5|-59.9|Reported|
|JRC397|RC|425607.9|6513558.1|247.9|150.0|GPS-RTK|88.8|-59.3|Reported|
|JRC398|RC|424890.3|6513376.3|268.4|180.0|GPS-RTK|86.6|-60.5|Reported|
|JRC399|RC|425533.4|6513198.9|250.1|279.0|GPS-RTK|91.2|-60.1|Reported|
|JRC400|RC|424928.9|6513318.7|267.7|250.0|GPS-RTK|89.0|-60.2|Reported|
|JRC401|RC|425843.1|6513110.9|244.0|126.0|GPS-RTK|91.3|-59.9|Reported - NSA|
|JRC402|RC|425566.5|6513198.5|248.6|39.0|GPS-RTK|90.0|-60.0|Reported|
|JRC403|RC|425607.7|6513195.1|248.1|233.0|GPS-RTK|89.6|-59.3|Reported|
|JRC404|RC|425881.4|6513111.9|242.5|120.0|GPS-RTK|89.2|-60.0|Reported - NSA|
|JRC405|RC|425686.8|6513193.5|247.4|152.0|GPS-RTK|90.8|-59.2|Reported|
|JRC406|RC|425920.9|6513107.5|241.1|120.0|GPS-RTK|93.5|-59.5|Reported - NSA|
|JRC407|RC|425958.0|6513109.1|239.0|120.0|GPS-RTK|94.8|-60.1|Reported - NSA|
|JRC408|RC|425650.7|6513196.7|247.4|213.0|GPS-RTK|92.9|-60.2|Reported - NSA|
|JRC409|RC|425999.8|6513114.6|238.4|250.0|GPS-RTK|88.0|-59.6|Reported - NSA|
|JRC410|RC|425604.8|6513350.1|246.1|198.0|GPS-RTK|90.4|-60.6|Reported|
|JRC411|RC|425726.8|6513189.7|248.1|153.0|GPS-RTK|90.9|-59.5|Reported - NSA|
|JRC412|RC|425578.7|6512739.6|249.0|297.0|GPS-RTK|88.5|-59.8|Reported|
|JRC413|RC|425578.5|6512651.8|246.5|17.0|GPS-RTK|90.0|-60.0|Reported|
|JRC414|RC|425609.6|6513278.4|246.0|45.0|GPS-RTK|95.4|-59.6|Reported|
|JRC415|RC|425565.9|6513350.4|246.4|150.0|GPS-RTK|90.2|-59.8|Reported|
|JRC416|RC|425571.0|6513279.0|246.9|250.0|GPS-RTK|89.4|-59.7|Reported|
|JRC417|RC|425526.9|6513276.8|247.9|69.0|GPS-RTK|90.0|-60.0|Reported|
|JRC418|RC|425528.8|6513352.6|247.0|60.0|GPS-RTK|91.7|-60.0|Reported|
|JRC419|RC|425490.9|6513480.3|249.0|282.0|GPS-RTK|91.9|-59.1|Reported|
|JRC420|RC|425452.7|6513475.5|249.7|318.0|GPS-RTK|86.0|-60.2|Reported|
|JRC421|RC|425584.9|6512655.1|246.1|257.0|GPS-RTK|92.6|-59.6|Reported|
|JRC422|RC|425538.4|6513478.6|247.7|222.0|GPS-RTK|87.9|-60.5|Reported|
|JRC423|RC|425448.7|6513276.5|250.9|330.0|GPS-RTK|94.6|-59.6|Reported|
|JRC424|RC|425485.3|6513275.5|249.2|300.0|GPS-RTK|86.8|-59.9|Reported|
|JRC425|RC|425519.3|6513112.8|253.2|300.0|GPS-RTK|91.3|-60.7|Reported|
|JRC426|RC|425921.1|6512858.8|243.4|120.0|GPS-RTK|92.5|-60.3|Reported - NSA|
|JRC427|RC|425396.0|6513113.0|258.2|288.0|GPS-RTK|90.8|-60.5|Reported|
|JRC428|RC|425357.2|6513112.3|260.0|204.0|GPS-RTK|92.4|-60.2|Reported|

----- End of picture text -----

35 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

Hole ID	Type	Easting (m)	Northing (m)	RL (m)	Depth (m)	Survey type	Azi (°)	Dip (°)	Assay status
JRC429	RC	425998.2	6512859.7	240.5	120.0	GPS-RTK	95.8	-60.2	Reported - NSA
JRC430	RC	425882.6	6512565.3	242.6	120.0	GPS-RTK	85.4	-60.2	Reported
JRC431	RC	425318.0	6513110.7	260.7	240.0	GPS-RTK	90.4	-59.5	Reported
JRC432	RC	425840.4	6512572.0	243.4	120.0	GPS-RTK	101.7	-60.4	Reported
JRC433	RC	425404.1	6513030.7	260.0	327.0	GPS-RTK	91.1	-61.9	Reported
JRC434	RC	425239.6	6513111.1	261.5	323.0	GPS-RTK	87.2	-60.1	Reported
JRC435	RC	425361.5	6513040.9	261.1	183.0	GPS-RTK	87.8	-59.6	Reported

NSA = No significant assay

Metal equivalents

Sulphide drill intersections are quoted using a nickel equivalent (NiEq) cut-off grade. No metal equivalent is used for the oxide domain.

Based on limited metallurgical testwork completed to date for the sulphide domain, it is the Company’s opinion that all the quoted elements included in metal equivalent calculations (palladium, platinum, gold, nickel, copper and cobalt) have a reasonable potential of being recovered and sold.

Metal equivalents for the sulphide domains are calculated according to the formula below:

• « NiEq (%) = Ni (%) + 0.37 x Pd (g/t) + 0.24 x Pt (g/t) + 0.25 x Au (g/t) + 0.65 x Cu (%) + 3.24 x Co (%);

Metal recoveries used in the metal equivalent calculations are at the lower end of the range for all metals in the sulphide domain based on limited metallurgical testwork (refer to ASX Announcement on 28 September 2021). Metal recoveries used in the metal equivalent calculations are listed below:

• « Pd – 75%, Pt – 65%, Au – 50%, Ni – 60%, Cu – 80%, Co – 60%. Metal prices used are:

• « Pd – US$1,700/oz,

• « Pt – US$1,300/oz,

• « Au – US$1,700/oz,

• « Ni – US$18,500/t,

• « Cu – US$9,000/t,

• « Co – US$60,000/t.

36 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

Appendix B Resource Table

Table 3. Gonneville Maiden Mineral Resource Estimate (JORC Code 2012), 9 November 2021.

Domain Cut-off Grade
	Category	Mass	Grade		Contained Metal
		(Mt)	Pd (g/t) Pt (g/t) Au (g/t) Ni (%) Cu (%) Co (%)	NiEq (%) PdEq (g/t)	Pd (Moz) Pt (Moz) Au (Moz) Ni (kt) Cu (kt) Co (kt)	NiEq (kt) PdEq (Moz)
Oxide 0.9g/t Pd	Indicated
	Inferred	8.8	1.8 0.06	1.9	0.51 0.02	0.52
	Subtotal	8.8	1.8 0.06	1.9	0.51 0.02	0.52
	Indicated	7.7	0.68 0.16 0.03 0.18 0.11 0.019	0.60 1.6	0.17 0.04 0.01 14 8.1 1.5	46 0.40
Sulphide 0.4%
	Inferred	8.0	0.97 0.25 0.03 0.17 0.14 0.029	0.79 2.1	0.25 0.06 0.01 14 11 2.3	63 0.55
(Transitional) NiEq
	Subtotal	16	0.83 0.20 0.03 0.18 0.12 0.024	0.70 1.9	0.42 0.10 0.02 27 19 3.8	110 0.95
	Indicated	150	0.74 0.18 0.03 0.16 0.10 0.016	0.61 1.6	3.5 0.82 0.14 240 150 23	890 7.7
Sulphide 0.4%
	Inferred	160	0.69 0.16 0.02 0.16 0.10 0.016	0.58 1.6	3.6 0.82 0.12 270 160 26	940 8.2
(Fresh) NiEq
	Subtotal	310	0.72 0.17 0.03 0.16 0.10 0.016	0.59 1.6	7.1 1.6 0.26 510 310 49	1,800 16
	Indicated	150	0.74 0.17 0.03 0.17 0.10 0.016	0.61 1.6	3.7 0.86 0.15 250 160 25	930 8.1
All	Inferred	180	0.76 0.15 0.03 0.16 0.09 0.016	0.56 1.6	4.4 0.89 0.15 280 170 28	1,000 9.3
	Total	330	0.75 0.16 0.03 0.16 0.10 0.016	0.58 1.6	8.1 1.7 0.30 530 330 53	1,900 17

Note some numerical differences may occur due to rounding to 2 significant figures. NiEq (%) = Ni (%) + 0.37 x Pd (g/t) + 0.24 x Pt (g/t) + 0.25 x Au (g/t) + 0.65 x Cu (%) + 3.24 x Co (%). PdEq (g/t) = Pd (g/t) + 0.66 x Pt (g/t) + 0.67 x Au (g/t) + 2.71 x Ni (%) + 1.76 x Cu (%) + 8.78 x Co (%). Includes drill holes drilled up to and including 31 July 2021.

37 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

Appendix C JORC Table 1

C-1 Section 1 Sampling Techniques and Data

Criteria	JORC Code explanation Commentary
	Nature and quality of sampling (eg. cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling. • HQ core was quarter cored and NQ2 was half cored with samples taken over selective intervals ranging from 0.2m to 1.2m (typically 1.0m). • Reverse Circulation (RC) drilling samples were collected as 1m samples.
	• Qualitative care taken when sampling
	Include reference to measures taken to ensure sample representivity and the diamond drill core to sample the same half of the drill core.
	appropriate calibration of any • For RC, two 1m assay samples were
	measurement tools or systems used. collected as a split from the rig cyclone using a cone splitter with the same split consistently sent to the laboratory for
Sampling
techniques
	analysis.
	Aspects of the determination of mineralisation that are Material to the Public Report. In cases where ‘industry standard’ work has been done this would be relatively simple (eg. ‘reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other cases more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (eg. submarine nodules) may warrant disclosure of detailed information. • Mineralisation is easily recognised by the presence of sulphides. In diamond core sample intervals were selected on a qualitative assessment of sulphide content
	• Drilling has been undertaken by diamond, Reverse Circulation (RC) techniques. • Diamond drill core is predominantly HQ
	Drill type (eg. core, reverse circulation, size (63.5mm diameter). Limited NQ2
	open-hole hammer, rotary air blast, (47.6mm diameter) drilling has also
Drilling	auger, Bangka, sonic, etc) and details been completed. Triple tube has been
	(eg. core diameter, triple or standard used from surface until competent
techniques
	tube, depth of diamond tails, face- bedrock and then standard tube
	sampling bit or other type, whether core is thereafter.
	oriented and if so, by what method, etc). • Core orientation is by an ACT Reflex
	(ACT II RD) tool • RC Drilling uses a face-sampling hammer drill bit with a diameter of 5.5 inches (140mm).
	Method of recording and assessing core and chip sample recoveries and results assessed. • Individual recoveries of diamond drill core samples were assessed quantitively by comparing measured core length with expected core length from drillers mark. Generally core recoverywas excellent in fresh rock
Drill sample
recovery

38 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

	and approaching 100%. Core recovery in oxide material is often poor due to sample washing out. Core recovery in the oxide zone averages 60% • Individual recoveries for RC composite samples were recorded on a qualitative basis. Sample weights were observed to be slightly lower through transported cover whereas drilling through bedrock yielded samples with more consistent weights. Two separate studies were completed where all the sample was weighed and compared with the expected weight. These indicated that as with the diamond core, sample recovery in the oxide is moderate and good in the fresh rock.
	• With diamond drilling triple tube coring in the oxide zone is undertaken to improve sample recovery. This results in
	Measures taken to maximise sample better recoveries but recovery is still
	recovery and ensure representative only moderate to good.
	nature of the samples. • Diamond core samples were
	consistently taken from the same side
	of the core and RC samples were consistently taken from the same split on the cyclone.
	Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material. • There is no evidence of a sample recovery and grade relationship in unweathered material.
	• All drill holes were logged geologically
	Whether core and chip samples have including, but not limited to;
	been geologically and geotechnically weathering, regolith, lithology,
	logged to a level of detail to support structure, texture, alteration and
	appropriate Mineral Resource estimation, mineralisation. Logging was at an
	mining studies and metallurgical studies. appropriate quantitative standard for
Logging	infill drilling and resource estimation.
	Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography. • Logging is considered qualitative in nature. • Diamond drill core is photographed wet before cutting.
	The total length and percentage of the • All holes were geologically logged in
	relevant intersections logged. full.
	If core, whether cut or sawn and whether quarter, half or all core taken. • Diamond core was sawn in half and one-half quartered and sampled over 0.2-1.2m intervals (mostly 1m).
Sub-sampling
	• RC assay samples were collected as
techniques
and sample	two 1m splits from the rig cyclone via a
preparation	If non-core, whether riffled, tube sampled, cone splitter. The cone splitter was
	rotary split, etc and whether sampled wet horizontal to ensure sample
	or dry. representivity. Wet or damp samples
	were noted in the sample logging sheet. A majority of samples were dry.

39 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

	For all sample types, the nature, quality and appropriateness of the sample preparation technique. • Sample preparation is industry standard and comprises oven drying, jaw crushing and pulverising to -75 microns (80% pass).
	• Field duplicates were collected from AC, RC and diamond drilling at an approximate ratio of one in twenty five.
	Quality control procedures adopted for • Diamond drill core field duplicates
	all sub-sampling stages to maximise collected as ¼ core.
	representivity of samples. • RC Field duplicates were collected
	from selected sulphide zones as a second 1m split directly from the cone splitter.
	Measures taken to ensure that the sampling is representative of the in-situ material collected, including for instance results for field duplicate/second-half sampling. • In the majority of cases the entire hole has been sampled and assayed. • Duplicate sample results were compared with the original sample results and there is no bias observed in the data.
	Whether sample sizes are appropriate to the grain size of the material being sampled. • Drill sample sizes are considered appropriate for the style of mineralisation sought and the nature of the drilling program.
	The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total. • Diamond drill core and RC samples underwent sample preparation and geochemical analysis by ALS Perth. Au-Pt-Pd was analysed by 50g fire assay fusion with an ICP-AES finish (ALS Method code PGM-ICP24). A 48- element suite was analysed by ICP-MS following a four-acid digest (ALS method code ME-MS61) for holes up to and including JD023 and JRC122. Later holes were analysed using four-acid digest for 34 elements (ALS method code ME-ICP61) including Ag, Al, As, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, Ga, K, La, Mg, Mn, Mo, Na, Ni, P, Pb, S, Sb, Sc, Sr, Th, Ti, Tl, U, V, W, Zn, Zr. Additional ore-grade analysis was performed as required for elements reporting out of range for Ni, Cr, Cu (ALS method code ME-OG-62) and Pd, Pt (ALS method code PGM-ICP27). • These techniques are considered total digests.
Quality of
assay data
and
laboratory
tests
	For geophysical tools, spectrometers, handheld XRF instruments, etc, the
	parameters used in determining the • Not applicable as no data from such
	analysis including instrument make and tools or instruments are reported
	model, reading times, calibrations factors applied and their derivation, etc.
	Nature of quality control procedures adopted (eg. standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (ie. lack of bias) and precision have been established. • Certified analytical standards and blanks were inserted at appropriate intervals for diamond, and RC drill samples with an insertion rate of >5%. Approximately 5% of significant intercepts were sent for cross laboratory checks.AllQAQC samples

40 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

	display results within acceptable levels of accuracy and precision.
	• Significant drill intersections are checked by the Project Geologist and
	The verification of significant intersections then by the General Manager
	by either independent or alternative Development. Significant intersections
	company personnel. are cross-checked with the logged
	geology and drill core after final assays are received.
	The use of twinned holes. • Six sets of twinned holes (RC versus Diamond) have been drilled to provide a comparison between grade/thickness variations over a 5m separation between drill holes. • Only Palladium assays have been analysed as part of this twin hole comparison. Ni and Cu grades are very low level in the selected holes (~0.1 – 0.2% Ni and <0.1% Cu), so no meaningful correlation can be obtained. • Intervals correlate well between holes although in detail there is variation between them for higher grade samples in terms of both location and grade. However, there is no discernible grade bias between drill types.
Verification of
sampling and
assaying
	• Primary drill data was collected digitally using OCRIS software before
	Documentation of primary data, data entry procedures, data verification, data being transferred to the master SQL database.
	storage (physical and electronic) • All procedures including data
	protocols. collection, verification, uploading to the database etc are captured in detailed procedures and summarised in a single document.
	Discuss any adjustment to assay data • No adjustments were made to the lab reported assay data.
	• Diamond and RC drill hole collar locations are initially recorded by Chalice employees using a handheld
	Accuracy and quality of surveys used to GPS with a +/- 3m margin of error and
	locate drill holes (collar and down-hole then picked up with an RTK-DGPS.
	surveys), trenches, mine workings and • RTK-DGPS collar pick-ups replace
	other locations used in Mineral Resource handheld GPS collar pick-ups and
Location of	estimation. have +/-20 mm margin of error.
data points	• Planned and final hole coordinates are compared after pick up to ensure that the original target has been tested.
	Specification of the grid system used. • The grid system used for the location of all drill holes is GDA94 - MGA (Zone 50).
	Quality and adequacy of topographic • RLs for reported holes were derived
	control. from RTK-DGPS pick-ups.
Data spacing	Data spacing for reporting of Exploration Results. • Drill hole spacing varies from between 40m x 40 m in the south to 160m x 80m in the north and west.
and
distribution

41 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

	Whether the data spacing and • Results from the drilling to date are
	distribution is sufficient to establish the considered sufficient to assume
	degree of geological and grade geological or grade continuity
	continuity appropriate for the Mineral appropriate for Mineral Resource
	Resource and Ore Reserve estimation estimation procedure(s) and
	procedure(s) and classifications applied. classifications.
	Whether sample compositing has been applied. • No compositing undertaken for diamond drill core or RC samples.
	• RC and Diamond drill holes were typically oriented within 15° of
	Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type. orthogonal to the interpreted dip and strike of the known zone of mineralisation. However, several holes were drilled at less optimal azimuths due to site access constraints or to test
Orientation of
data in
relation to	for alternative mineralisation orientations.
geological
structure	If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material. • The orientation of the drilling is not considered to have introduced sampling bias.
	The measures taken to ensure sample security. • Samples were collected in polyweave bags either at the drill rig (RC samples) or at the core cutting facility (diamond samples). The polyweave bags have five samples each and are cable tied. • Filled bags were collected into palletised bulk bags at the field office
Sample
security
	and delivered directly from site to ALS laboratories in Wangara, Perth by a Chalice contractor several times weekly.
	The results of any audits or reviews of sampling techniques and data. • CSA Global conducted a site visit and review of the sampling techniques In July 2021. • SRK completed an independent assurance review of the Chalice procedures including documentation and appropriateness of methods employed.
Audits or
reviews

C-2 Section 2 Reporting of Exploration Results

Criteria	JORC Code explanation Commentary
Mineral tenement and land tenure status	Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings. • Exploration activities are ongoing over E70/5118 and 5119 and the tenements are in good standing. The holder CGM (WA) Pty Ltd is a wholly owned subsidiary of Chalice Mining Limited with no known encumbrances.
	The security of the tenure held at the • Current drilling is on private land, all of
	time of reportingalongwith anyknown which is owned by the Company.

42 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

Criteria	JORC Code explanation	Commentary	Commentary
	impediments to obtaining a licence to	•	E70/5119 partially overlaps ML1SA, a
	operate in the area.		State Agreement covering Bauxite
			mineral rights only.
		•	There is no previous exploration at
			Gonneville and only limited
			exploration has been completed by
			other exploration parties in the vicinity
			of the targets identified by Chalice to
			date.
		•	Chalice has compiled historical
			records dating back to the early
			1960’s which indicate only three
			genuine explorers in the area, all
			primarily targeting Fe-Ti-V
			mineralisation.
		•	Over 1971-1972, Garrick Agnew Pty
			Ltd undertook reconnaissance
			surface sampling over prominent
			aeromagnetic anomalies in a search
			for ‘Coates deposit style’ vanadium
			mineralisation. Surface sampling
			methodology is not described in
Exploration done	Acknowledgment and appraisal of		detail, nor were analytical methods
by other parties	exploration by other parties.		specified, with samples analysed for
			V2O5, Ni, Cu, Cr, Pb and Zn, results of
			which are referred to in this
			announcement.
		•	Three diamond holes were completed
			by Bestbet Pty Ltd targeting Fe-Ti-V
			situated approximately 3km NE of
			JRC001. No elevated Ni-Cu-PGE
			assays were reported.
		•	Bestbet Pty Ltd undertook 27 stream
			sediment samples within E70/5119.
			Elevated levels of palladium were
			noted in the coarse fraction (-
			5mm+2mm) are reported in this
			release. Finer fraction samples did not
			replicate the coarse fraction results.
		•	A local AMAG survey was flown in
			1996 by Alcoa using 200m line
			spacing which has been used by
			Chalice for targeting purposes.
		•	The target deposit type is an
			orthomagmatic Ni-Cu-PGE sulphide
			deposit, within the Yilgarn Craton. The
Geology	Deposit type, geological setting and style of mineralisation.		style of sulphide mineralisation intersected consists of massive, matrix, stringer and disseminated sulphides
			typical of metamorphosed and
			structurally overprinted
			orthomagmatic Ni sulphide deposits.
	A summary of all information material to
	the understanding of the exploration
Drill hole Information	results including a tabulation of the following information for all Material drill holes:	•	Provided in body of text.
	Easting and northing of the drill hole
	collar

43 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

Criteria	JORC Code explanation Commentary
	Elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole collar Dip and azimuth of the hole Down hole length and interception depth hole length.
	If the exclusion of this information is justified on the basis that the
	information is not Material and this exclusion does not detract from the understanding of the report, the • No material information has been excluded.
	Competent Person should clearly explain why this is the case.
Data aggregation methods	In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum grade truncations (eg. cutting of high grades) and cut-off grades are usually Material and should be stated. • Significant intercepts are reported using a >0.5g/t Pd length-weighted cut off for oxide and >0.4% NiEq length-weighted cut off for sulphide material. A maximum of 4m internal dilution has been applied.
	Where aggregate intercepts incorporate short lengths of high-grade results and longer lengths of low grade results, the procedure used for such aggregation should be stated and some typical examples of such aggregations should be shown in detail. • Higher grade intervals are reported using a >0.9g/t Pd length-weighted cut off for oxide and >0.6% NiEq length-weighted cut off. A maximum of 2m internal dilution has been applied.
	The assumptions used for any reporting of metal equivalent values should be clearly stated. • Metal price assumptions used in the metal equivalent calculations are: US$1,700/oz Pd, US$1,300/oz Pt, US$1,700/oz Au, US$18,500/t Ni, US$9,000/t Cu, US$60,000/t Co. • No metal equivalent calculation is reported for the oxide material. • Metallurgical recovery assumptions used in the metal equivalent calculation for the sulphide (fresh) material are: Pd – 75%, Pt – 65%, Au – 50%, Ni – 60%, Cu – 80%, Co - 60%. • Hence for the sulphide material NiEq = Ni % + 0.37x Pd g/t + 0.24 x Pt g/t + 0.25 x Au g/t + 0.65 x Cu % +3.24 x Co % and PdEq = Pd g/t + 0.66 x Pt g/t + 0.67 x Au g/t + 2.71 x Ni % + 1.76 x Cu % + 8.78 x Co %. • The volume of transitional material is small and considered unlikely to materially affect the overall metal equivalent calculation.
	• RC and Diamond drill holes were
	These relationships are particularly important in the reporting of Exploration Results. typically oriented within 15° of orthogonal to the interpreted dip and strike of the known zone of mineralisation. However, several holes
Relationship
between
mineralisation
widths and	If the geometry of the mineralisation were drilled at less optimal azimuths
intercept lengths	with respect to the drill hole angle is due to site access constraints or to
	known, its nature should be reported. test for alternative mineralisation
	orientations.

44 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF

Criteria	JORC Code explanation Commentary
	If it is not known and only the down hole lengths are reported, there should be a clear statement to this effect (eg. ‘down hole length, true width not known’). • All widths are quoted down-hole. True widths vary depending on the orientation of the hole and the orientation of the mineralisation. For low grade intercepts (> 0.3g/t Pd) true width approximates downhole width. For high grade intercepts (>1g/t Pd) true width is generally between 80 and 100% of the downhole width.
	Appropriate maps and sections (with scales) and tabulations of intercepts should be included for any significant
Diagrams	discovery being reported These should • Refer to figures in the body of text.
	include, but not be limited to a plan view of drill hole collar locations and appropriate sectional views.
Balanced reporting	Where comprehensive reporting of all Exploration Results is not practicable, representative reporting of both low and high grades and/or widths should be practiced to avoid misleading reporting of Exploration Results. • All holes including those without significant intercepts have been reported.
	Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical
Other	survey results; geochemical survey results; bulk samples – size and method of treatment; metallurgical test results; • Not applicable. All meaningful data has been included
substantive
exploration data
	bulk density, groundwater, geotechnical and rock characteristics; potential deleterious or contaminating substances.
Further work	The nature and scale of planned further work (eg. tests for lateral Exts or depth Exts or large-scale step-out drilling). • Diamond and RC drilling will continue to test high-priority targets including EM conductors. Further drilling along strike and down dip may occur at these and other targets depending on results. • Scoping study work has commenced including additional metallurgical testwork, mining studies, tailings studies and waste rock characterisation etc.
	Diagrams clearly highlighting the areas
	of possible extensions, including the main geological interpretations and future drilling areas, provided this information is not commercially • Any potential extensions to mineralisation are shown in the figures in the body of the text.
	sensitive.

45 Chalice Mining Limited

ASX:CHN OTCQB:CGMLF